| Message ID | 1690948281-2143-4-git-send-email-quic_krichai@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | PCI: endpoint: add D-state change notifier support | expand |
In subject:
PCI: qcom-ep: Print D-state name to distinguish D3hot/D3cold
("Update" doesn't give any hint about what the change does.)
On Wed, Aug 02, 2023 at 09:21:20AM +0530, Krishna chaitanya chundru wrote:
> Now that the state event is stored as pci_power_t, let's use the PCI helper
> pci_power_name() to print the state event.
s/let's use/use/
The main change is this, right?
D3 -> D3hot
D4 -> D3cold
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
> drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> index 22545ff..0c69a61 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> @@ -583,7 +583,6 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
> } else if (FIELD_GET(PARF_INT_ALL_DSTATE_CHANGE, status)) {
> dstate = dw_pcie_readl_dbi(pci, DBI_CON_STATUS) &
> DBI_CON_STATUS_POWER_STATE_MASK;
> - dev_dbg(dev, "Received D%d state event\n", dstate);
> state = dstate;
> if (dstate == 3) {
Can this check for "state == PCI_D3hot" to be clearer?
> val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
> @@ -594,6 +593,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
> if (gpiod_get_value(pcie_ep->reset))
> state = PCI_D3cold;
> }
> + dev_dbg(dev, "Received %s event\n", pci_power_name(state));
Not really sure why this needs to be moved (the diff would be clearer
if it stayed in the same spot), but it doesn't look like it really
matters.
> pci_epc_dstate_notify(pci->ep.epc, state);
> } else if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) {
> dev_dbg(dev, "Received Linkup event. Enumeration complete!\n");
> --
> 2.7.4
>
On 8/3/2023 11:28 PM, Bjorn Helgaas wrote: > In subject: > > PCI: qcom-ep: Print D-state name to distinguish D3hot/D3cold > > ("Update" doesn't give any hint about what the change does.) I will update it as suggested. > On Wed, Aug 02, 2023 at 09:21:20AM +0530, Krishna chaitanya chundru wrote: >> Now that the state event is stored as pci_power_t, let's use the PCI helper >> pci_power_name() to print the state event. > s/let's use/use/ > > The main change is this, right? > > D3 -> D3hot > D4 -> D3cold Yes this is the main change. >> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> >> --- >> drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c >> index 22545ff..0c69a61 100644 >> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c >> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c >> @@ -583,7 +583,6 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data) >> } else if (FIELD_GET(PARF_INT_ALL_DSTATE_CHANGE, status)) { >> dstate = dw_pcie_readl_dbi(pci, DBI_CON_STATUS) & >> DBI_CON_STATUS_POWER_STATE_MASK; >> - dev_dbg(dev, "Received D%d state event\n", dstate); >> state = dstate; >> if (dstate == 3) { > Can this check for "state == PCI_D3hot" to be clearer? I will modify this. > >> val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL); >> @@ -594,6 +593,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data) >> if (gpiod_get_value(pcie_ep->reset)) >> state = PCI_D3cold; >> } >> + dev_dbg(dev, "Received %s event\n", pci_power_name(state)); > Not really sure why this needs to be moved (the diff would be clearer > if it stayed in the same spot), but it doesn't look like it really > matters. As we know if the link is in D3hot or D3cold moving the log here so that we can log correct Dstate. - KC >> pci_epc_dstate_notify(pci->ep.epc, state); >> } else if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) { >> dev_dbg(dev, "Received Linkup event. Enumeration complete!\n"); >> -- >> 2.7.4 >>
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c index 22545ff..0c69a61 100644 --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c @@ -583,7 +583,6 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data) } else if (FIELD_GET(PARF_INT_ALL_DSTATE_CHANGE, status)) { dstate = dw_pcie_readl_dbi(pci, DBI_CON_STATUS) & DBI_CON_STATUS_POWER_STATE_MASK; - dev_dbg(dev, "Received D%d state event\n", dstate); state = dstate; if (dstate == 3) { val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL); @@ -594,6 +593,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data) if (gpiod_get_value(pcie_ep->reset)) state = PCI_D3cold; } + dev_dbg(dev, "Received %s event\n", pci_power_name(state)); pci_epc_dstate_notify(pci->ep.epc, state); } else if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) { dev_dbg(dev, "Received Linkup event. Enumeration complete!\n");
Now that the state event is stored as pci_power_t, let's use the PCI helper pci_power_name() to print the state event. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- drivers/pci/controller/dwc/pcie-qcom-ep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)