diff mbox series

[v2,2/4] phy: qcom-qmp-pcie: add endpoint support for sa8775p

Message ID 1697023109-23671-3-git-send-email-quic_msarkar@quicinc.com (mailing list archive)
State Superseded
Delegated to: Krzysztof WilczyƄski
Headers show
Series arm64: qcom: sa8775p: add support for EP PCIe | expand

Commit Message

Mrinmay Sarkar Oct. 11, 2023, 11:18 a.m. UTC
Add support for dual lane end point mode PHY found on sa8755p platform.

Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c   | 41 ++++++++++++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h |  2 ++
 2 files changed, 43 insertions(+)

Comments

Dmitry Baryshkov Oct. 11, 2023, 11:36 a.m. UTC | #1
On Wed, 11 Oct 2023 at 14:19, Mrinmay Sarkar <quic_msarkar@quicinc.com> wrote:
>
> Add support for dual lane end point mode PHY found on sa8755p platform.
>
> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c   | 41 ++++++++++++++++++++++++++++++
>  drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h |  2 ++
>  2 files changed, 43 insertions(+)

Two minor questions.

>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index a63ca74..962b4a1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -2147,6 +2147,38 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
>         QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
>  };
>
> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl[] = {
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_BG_TIMER, 0x02),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYS_CLK_CTRL, 0x07),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x27),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x0a),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x17),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x19),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x00),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x03),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x00),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),

I should check whether we miss QSERDES_V5_COM_CMN_MODE in
sm8450_qmp_gen4x2_pcie_ep_serdes_tbl, which is otherwise nearly
identical.
Also do you need to set QSERDES_V5_COM_CORE_CLK_EN here?

> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x04),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0xff),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x09),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x19),
> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x28),
> +};
> +
> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl[] = {
> +       QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08),
> +};

This is the same as sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl

> +
> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl[] = {
> +       QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_MX_CTRL7, 0x00),
> +       QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_SW_CTRL7, 0x00),
> +};

Could you please confirm that these registers belong to the V5
namespace rather than V5_20 one?

> +
>  struct qmp_pcie_offsets {
>         u16 serdes;
>         u16 pcs;
> @@ -3043,6 +3075,15 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
>                 .pcs_misc_num   = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
>         },
>
> +       .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
> +               .serdes         = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
> +               .serdes_num     = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
> +               .pcs_misc       = sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl,
> +               .pcs_misc_num   = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl),
> +               .pcs            = sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl,
> +               .pcs_num        = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl),
> +       },
> +
>         .reset_list             = sdm845_pciephy_reset_l,
>         .num_resets             = ARRAY_SIZE(sdm845_pciephy_reset_l),
>         .vreg_list              = qmp_phy_vreg_l,
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> index 36cc80b..6ee1c33 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> @@ -11,6 +11,8 @@
>  #define QPHY_V5_PCS_PCS_STATUS1                                0x014
>  #define QPHY_V5_PCS_POWER_DOWN_CONTROL                 0x040
>  #define QPHY_V5_PCS_START_CONTROL                      0x044
> +#define QPHY_V5_PCS_INSIG_SW_CTRL7                     0x060
> +#define QPHY_V5_PCS_INSIG_MX_CTRL7                     0x07c
>  #define QPHY_V5_PCS_LOCK_DETECT_CONFIG1                        0x0c4
>  #define QPHY_V5_PCS_LOCK_DETECT_CONFIG2                        0x0c8
>  #define QPHY_V5_PCS_LOCK_DETECT_CONFIG3                        0x0cc
> --
> 2.7.4
>
Mrinmay Sarkar Oct. 11, 2023, 11:55 a.m. UTC | #2
On 10/11/2023 5:06 PM, Dmitry Baryshkov wrote:
> On Wed, 11 Oct 2023 at 14:19, Mrinmay Sarkar <quic_msarkar@quicinc.com> wrote:
>> Add support for dual lane end point mode PHY found on sa8755p platform.
>>
>> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c   | 41 ++++++++++++++++++++++++++++++
>>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h |  2 ++
>>   2 files changed, 43 insertions(+)
> Two minor questions.
>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>> index a63ca74..962b4a1 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
>> @@ -2147,6 +2147,38 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
>>          QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
>>   };
>>
>> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl[] = {
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_BG_TIMER, 0x02),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYS_CLK_CTRL, 0x07),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x27),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x0a),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x17),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x19),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x00),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x03),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x00),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> I should check whether we miss QSERDES_V5_COM_CMN_MODE in
> sm8450_qmp_gen4x2_pcie_ep_serdes_tbl, which is otherwise nearly
> identical.
> Also do you need to set QSERDES_V5_COM_CORE_CLK_EN here?
QSERDES_V5_COM_CORE_CLK_EN is common for both RC and EP
so we are using it in sa8775p_qmp_gen4x2_pcie_serdes_alt_tbl

-Mrinmay
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x04),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0xff),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x09),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x19),
>> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x28),
>> +};
>> +
>> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl[] = {
>> +       QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08),
>> +};
> This is the same as sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl

so you want me to use sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl
instead of creating new one for sa8775?

-Mrinmay

>> +
>> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl[] = {
>> +       QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_MX_CTRL7, 0x00),
>> +       QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_SW_CTRL7, 0x00),
>> +};
> Could you please confirm that these registers belong to the V5
> namespace rather than V5_20 one?
may I know difference between V5 and V5_20 namespace
can't we use V5 namespace here?

-Mrinmay
>> +
>>   struct qmp_pcie_offsets {
>>          u16 serdes;
>>          u16 pcs;
>> @@ -3043,6 +3075,15 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
>>                  .pcs_misc_num   = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
>>          },
>>
>> +       .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
>> +               .serdes         = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
>> +               .serdes_num     = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
>> +               .pcs_misc       = sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl,
>> +               .pcs_misc_num   = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl),
>> +               .pcs            = sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl,
>> +               .pcs_num        = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl),
>> +       },
>> +
>>          .reset_list             = sdm845_pciephy_reset_l,
>>          .num_resets             = ARRAY_SIZE(sdm845_pciephy_reset_l),
>>          .vreg_list              = qmp_phy_vreg_l,
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
>> index 36cc80b..6ee1c33 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
>> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
>> @@ -11,6 +11,8 @@
>>   #define QPHY_V5_PCS_PCS_STATUS1                                0x014
>>   #define QPHY_V5_PCS_POWER_DOWN_CONTROL                 0x040
>>   #define QPHY_V5_PCS_START_CONTROL                      0x044
>> +#define QPHY_V5_PCS_INSIG_SW_CTRL7                     0x060
>> +#define QPHY_V5_PCS_INSIG_MX_CTRL7                     0x07c
>>   #define QPHY_V5_PCS_LOCK_DETECT_CONFIG1                        0x0c4
>>   #define QPHY_V5_PCS_LOCK_DETECT_CONFIG2                        0x0c8
>>   #define QPHY_V5_PCS_LOCK_DETECT_CONFIG3                        0x0cc
>> --
>> 2.7.4
>>
>
Dmitry Baryshkov Oct. 11, 2023, noon UTC | #3
On Wed, 11 Oct 2023 at 14:56, Mrinmay Sarkar <quic_msarkar@quicinc.com> wrote:
>
>
> On 10/11/2023 5:06 PM, Dmitry Baryshkov wrote:
> > On Wed, 11 Oct 2023 at 14:19, Mrinmay Sarkar <quic_msarkar@quicinc.com> wrote:
> >> Add support for dual lane end point mode PHY found on sa8755p platform.
> >>
> >> Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
> >> ---
> >>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c   | 41 ++++++++++++++++++++++++++++++
> >>   drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h |  2 ++
> >>   2 files changed, 43 insertions(+)
> > Two minor questions.
> >
> >> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> >> index a63ca74..962b4a1 100644
> >> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> >> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> >> @@ -2147,6 +2147,38 @@ static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
> >>          QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
> >>   };
> >>
> >> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl[] = {
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_BG_TIMER, 0x02),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYS_CLK_CTRL, 0x07),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x27),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x0a),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x17),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x19),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x00),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x03),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x00),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
> > I should check whether we miss QSERDES_V5_COM_CMN_MODE in
> > sm8450_qmp_gen4x2_pcie_ep_serdes_tbl, which is otherwise nearly
> > identical.
> > Also do you need to set QSERDES_V5_COM_CORE_CLK_EN here?
> QSERDES_V5_COM_CORE_CLK_EN is common for both RC and EP
> so we are using it in sa8775p_qmp_gen4x2_pcie_serdes_alt_tbl
>
> -Mrinmay
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x04),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0xff),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x09),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x19),
> >> +       QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x28),
> >> +};
> >> +
> >> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl[] = {
> >> +       QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08),
> >> +};
> > This is the same as sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl
>
> so you want me to use sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl
> instead of creating new one for sa8775?

If you don't see a problem with that, yes.

>
> -Mrinmay
>
> >> +
> >> +static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl[] = {
> >> +       QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_MX_CTRL7, 0x00),
> >> +       QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_SW_CTRL7, 0x00),
> >> +};
> > Could you please confirm that these registers belong to the V5
> > namespace rather than V5_20 one?
> may I know difference between V5 and V5_20 namespace
> can't we use V5 namespace here?

Register names are different, see existing v5 vs v5.20 and v4 vs v4.20
headers. So, I'd kindly ask to use the appropriate namespace.

>
> -Mrinmay
> >> +
> >>   struct qmp_pcie_offsets {
> >>          u16 serdes;
> >>          u16 pcs;
> >> @@ -3043,6 +3075,15 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
> >>                  .pcs_misc_num   = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
> >>          },
> >>
> >> +       .tbls_ep = &(const struct qmp_phy_cfg_tbls) {
> >> +               .serdes         = sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
> >> +               .serdes_num     = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
> >> +               .pcs_misc       = sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl,
> >> +               .pcs_misc_num   = ARRAY_SIZE(sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl),
> >> +               .pcs            = sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl,
> >> +               .pcs_num        = ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl),
> >> +       },
> >> +
> >>          .reset_list             = sdm845_pciephy_reset_l,
> >>          .num_resets             = ARRAY_SIZE(sdm845_pciephy_reset_l),
> >>          .vreg_list              = qmp_phy_vreg_l,
> >> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> >> index 36cc80b..6ee1c33 100644
> >> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> >> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
> >> @@ -11,6 +11,8 @@
> >>   #define QPHY_V5_PCS_PCS_STATUS1                                0x014
> >>   #define QPHY_V5_PCS_POWER_DOWN_CONTROL                 0x040
> >>   #define QPHY_V5_PCS_START_CONTROL                      0x044
> >> +#define QPHY_V5_PCS_INSIG_SW_CTRL7                     0x060
> >> +#define QPHY_V5_PCS_INSIG_MX_CTRL7                     0x07c
> >>   #define QPHY_V5_PCS_LOCK_DETECT_CONFIG1                        0x0c4
> >>   #define QPHY_V5_PCS_LOCK_DETECT_CONFIG2                        0x0c8
> >>   #define QPHY_V5_PCS_LOCK_DETECT_CONFIG3                        0x0cc
> >> --
> >> 2.7.4
> >>
> >
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index a63ca74..962b4a1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -2147,6 +2147,38 @@  static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x4_pcie_rc_serdes_alt_tbl[]
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34),
 };
 
+static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BG_TIMER, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYS_CLK_CTRL, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x27),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x17),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE0, 0xfb),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE0, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN0_MODE1, 0xfb),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_INTEGLOOP_GAIN1_MODE1, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_CMN_MODE, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x28),
+};
+
+static const struct qmp_phy_init_tbl sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08),
+};
+
+static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_MX_CTRL7, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V5_PCS_INSIG_SW_CTRL7, 0x00),
+};
+
 struct qmp_pcie_offsets {
 	u16 serdes;
 	u16 pcs;
@@ -3043,6 +3075,15 @@  static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
 		.pcs_misc_num	= ARRAY_SIZE(sa8775p_qmp_gen4_pcie_rc_pcs_misc_tbl),
 	},
 
+	.tbls_ep = &(const struct qmp_phy_cfg_tbls) {
+		.serdes		= sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl,
+		.serdes_num	= ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_serdes_alt_tbl),
+		.pcs_misc	= sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl,
+		.pcs_misc_num	= ARRAY_SIZE(sa8775p_qmp_gen4_pcie_ep_pcs_misc_tbl),
+		.pcs		= sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl,
+		.pcs_num	= ARRAY_SIZE(sa8775p_qmp_gen4x2_pcie_ep_pcs_alt_tbl),
+	},
+
 	.reset_list		= sdm845_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
index 36cc80b..6ee1c33 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
@@ -11,6 +11,8 @@ 
 #define QPHY_V5_PCS_PCS_STATUS1				0x014
 #define QPHY_V5_PCS_POWER_DOWN_CONTROL			0x040
 #define QPHY_V5_PCS_START_CONTROL			0x044
+#define QPHY_V5_PCS_INSIG_SW_CTRL7			0x060
+#define QPHY_V5_PCS_INSIG_MX_CTRL7			0x07c
 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG1			0x0c4
 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG2			0x0c8
 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG3			0x0cc