Enable pci=bfsort by default on future Dell systems

Commit Message

Narendra K Dec. 14, 2010, 5:57 p.m. UTC

None

Patch

diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index f7c8a39..5fe7502 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -22,6 +22,7 @@  unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 
 unsigned int pci_early_dump_regs;
 static int pci_bf_sort;
+static int smbios_type_b1_flag;
 int pci_routeirq;
 int noioapicquirk;
 #ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
@@ -185,6 +186,39 @@  static int __devinit set_bf_sort(const struct dmi_system_id *d)
 	return 0;
 }
 
+static void __devinit read_dmi_type_b1(const struct dmi_header *dm,
+				       void *private_data)
+{
+	u8 *d = (u8 *)dm + 4;
+
+	if (dm->type != 0xB1)
+		return;
+	switch (((*(u32 *)d) >> 9) & 0x03) {
+	case 0x00:
+		printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
+		break;
+	case 0x01: /* set pci=bfsort */
+		smbios_type_b1_flag = 1;
+		break;
+	case 0x02: /* do not set pci=bfsort */
+		smbios_type_b1_flag = 2;
+		break;
+	default:
+		break;
+	}
+}
+
+static int __devinit find_sort_method(const struct dmi_system_id *d)
+{
+	dmi_walk(read_dmi_type_b1, NULL);
+
+	if (smbios_type_b1_flag == 1) {
+		set_bf_sort(d);
+		return 0;
+	}
+	return -1;
+}
+
 /*
  * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
  */
@@ -213,6 +247,13 @@  static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
 	},
 #endif		/* __i386__ */
 	{
+		.callback = find_sort_method,
+		.ident = "Dell System",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+		},
+	},
+	{
 		.callback = set_bf_sort,
 		.ident = "Dell PowerEdge 1950",
 		.matches = {