diff mbox

[v2,8/8] pci: Wake-up devices before save for reset

Message ID 20130508025827.30771.78449.stgit@bling.home (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Alex Williamson May 8, 2013, 2:58 a.m. UTC
Devices come out of reset in D0.  Restoring a device to a different
post-reset state takes more smarts than our simple config space
restore, which can leave devices in an inconsistent state.  For
example, if a device is reset in D3, but the restore doesn't
successfully return the device to D3, then the actual state of the
device and dev->current_state are contradictory.  Put everything
in D0 going into the reset, then we don't need to do anything
special on the way out.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
 drivers/pci/pci.c |    7 +++++++
 1 file changed, 7 insertions(+)


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8647998..98372ec 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3312,6 +3312,13 @@  static void pci_dev_unlock(struct pci_dev *dev)
 
 static void pci_dev_save(struct pci_dev *dev)
 {
+	/*
+	 * Wake-up device prior to save.  PM registers default to D0 after
+	 * reset and a simple register restore doesn't reliably return
+	 * to a non-D0 state anyway.
+	 */
+	pci_set_power_state(dev, PCI_D0);
+
 	pci_save_state(dev);
 	/*
 	 * both INTx and MSI are disabled after the Interrupt Disable bit