diff mbox

pci: avoid unnecessary writing of the command register during probe

Message ID 20130823160612.GA13605@google.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Bjorn Helgaas Aug. 23, 2013, 4:06 p.m. UTC 
On Thu, Aug 22, 2013 at 11:19:18PM +0100, Zoltan Kiss wrote:
> While I tracked an another bug, I noticed that the PCI command register is
> quite often updated here unnecessarily.
> 
> Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>

I applied this to pci/misc with minor tweaks as follows.  Let me know
if you see anything wrong.

Bjorn


PCI: Disable decoding for BAR sizing only when it was actually enabled

From: Zoltan Kiss <zoltan.kiss@citrix.com>

We disable BARs while sizing them so we don't cause conflicts with other
devices (see 253d2e5498 and bbffe43524).  But if device decoding is already
disabled before we size the BAR, we don't need to disable it again.

[bhelgaas: changelog, add PCI_COMMAND_DECODING_ENABLE for readability]
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/probe.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index cf57fe7..2c6f328 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -165,6 +165,8 @@  static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar)
  *
  * Returns 1 if the BAR is 64-bit, or 0 if 32-bit.
  */
+#define PCI_COMMAND_DECODE_ENABLE	(PCI_COMMAND_MEMORY | PCI_COMMAND_IO)
+
 int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 			struct resource *res, unsigned int pos)
 {
@@ -178,8 +180,10 @@  int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	/* No printks while decoding is disabled! */
 	if (!dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &orig_cmd);
-		pci_write_config_word(dev, PCI_COMMAND,
-			orig_cmd & ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
+		if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) {
+			pci_write_config_word(dev, PCI_COMMAND,
+				orig_cmd & ~PCI_COMMAND_DECODE_ENABLE);
+		}
 	}
 
 	res->name = pci_name(dev);
@@ -293,7 +297,8 @@  int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 fail:
 	res->flags = 0;
 out:
-	if (!dev->mmio_always_on)
+	if (!dev->mmio_always_on &&
+	    (orig_cmd & PCI_COMMAND_DECODE_ENABLE))
 		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
 
 	if (bar_too_big)