@@ -167,42 +167,16 @@ constraints on the number of vectors that can be allocated;
pci_enable_msi_block_part() returns as soon as it finds any constraint
that doesn't allow the call to succeed.
-4.2.4 pci_enable_msi_block_auto
-
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
-
-This variation on pci_enable_msi() call allows a device driver to request
-the maximum possible number of MSIs. The MSI specification only allows
-interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
-
-If this function returns a positive number, it indicates that it has
-succeeded and the returned value is the number of allocated interrupts. In
-this case, the function enables MSI on this device and updates dev->irq to
-be the lowest of the new interrupts assigned to it. The other interrupts
-assigned to the device are in the range dev->irq to dev->irq + returned
-value - 1.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
-
-If the device driver needs to know the number of interrupts the device
-supports it can pass the pointer count where that number is stored. The
-device driver must decide what action to take if pci_enable_msi_block_auto()
-succeeds, but returns a value less than the number of interrupts supported.
-If the device driver does not need to know the number of interrupts
-supported, it can set the pointer count to NULL.
-
-4.2.5 pci_disable_msi
+4.2.4 pci_disable_msi
void pci_disable_msi(struct pci_dev *dev)
-This function should be used to undo the effect of pci_enable_msi_block(),
-pci_enable_msi(), pci_enable_msi_block_auto() or pci_enable_msi_block_part().
-Calling it restores dev->irq to the pin-based interrupt number and frees the
-previously allocated message signaled interrupt(s). The interrupt may
-subsequently be assigned to another device, so drivers should not cache the
-value of dev->irq.
+This function should be used to undo the effect of pci_enable_msi() or
+pci_enable_msi_block() or pci_enable_msi_block_part(). Calling it restores
+dev->irq to the pin-based interrupt number and frees the previously
+allocated message signaled interrupt(s). The interrupt may subsequently be
+assigned to another device, so drivers should not cache the value of
+dev->irq.
Before calling this function, a device driver must always call free_irq()
on any interrupt for which it previously called request_irq().
@@ -866,31 +866,6 @@ int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
}
EXPORT_SYMBOL(pci_enable_msi_block);
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
-{
- int ret, nvec;
- u16 msgctl;
-
- if (!dev->msi_cap)
- return -EINVAL;
-
- pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
- ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
-
- if (maxvec)
- *maxvec = ret;
-
- do {
- nvec = ret;
- ret = pci_enable_msi_block(dev, nvec);
- } while (ret > 0);
-
- if (ret < 0)
- return ret;
- return nvec;
-}
-EXPORT_SYMBOL(pci_enable_msi_block_auto);
-
void pci_msi_shutdown(struct pci_dev *dev)
{
struct msi_desc *desc;
@@ -1133,12 +1133,6 @@ static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
return -1;
}
-static inline int
-pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
-{
- return -1;
-}
-
static inline void pci_msi_shutdown(struct pci_dev *dev)
{ }
static inline void pci_disable_msi(struct pci_dev *dev)
@@ -1172,7 +1166,6 @@ static inline int pci_msi_enabled(void)
int pci_enable_msi_block_part(struct pci_dev *dev,
unsigned int nvec, int nvec_mme);
int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec);
void pci_msi_shutdown(struct pci_dev *dev);
void pci_disable_msi(struct pci_dev *dev);
int pci_msix_table_size(struct pci_dev *dev);
There are no consumers of pci_enable_msi_block_auto() interface have left. Eliminate it for now. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> --- Documentation/PCI/MSI-HOWTO.txt | 40 ++++++-------------------------------- drivers/pci/msi.c | 25 ------------------------ include/linux/pci.h | 7 ------ 3 files changed, 7 insertions(+), 65 deletions(-)