diff mbox

Issue with the emulated PCI bridge implementation

Message ID 20140103201024.08ca11fb@skate (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Thomas Petazzoni Jan. 3, 2014, 7:10 p.m. UTC
Dear Arnd Bergmann,

On Fri, 03 Jan 2014 20:04:57 +0100, Arnd Bergmann wrote:

> > Digging in the LAKML archive, I found a lspci -v output about the
> > e1000e, and it has an I/O space:
> 
> Ok, thanks for the confirmation!
> 
> Do you mind posting your hack here? It may be useful for others as
> well, such as the xgene developers that seem to be doing funny things
> with their I/O space.

The current hack is the following very ugly piece of code... It runs
some command and reads back some registers, and you should see some
well-known values (which can be found in the e1000 datasheet, I don't
remember them right now).

I'm not sure why I do the pci_request_selected_regions_exclusive() call
*after* the actual in/out. Probably a mistake, but as I said, this is
ugly stuff :)

Thomas

Comments

Arnd Bergmann Jan. 3, 2014, 7:13 p.m. UTC | #1
On Friday 03 January 2014 20:10:24 Thomas Petazzoni wrote:
> Dear Arnd Bergmann,
> 
> On Fri, 03 Jan 2014 20:04:57 +0100, Arnd Bergmann wrote:
> 
> > > Digging in the LAKML archive, I found a lspci -v output about the
> > > e1000e, and it has an I/O space:
> > 
> > Ok, thanks for the confirmation!
> > 
> > Do you mind posting your hack here? It may be useful for others as
> > well, such as the xgene developers that seem to be doing funny things
> > with their I/O space.
> 
> The current hack is the following very ugly piece of code... It runs
> some command and reads back some registers, and you should see some
> well-known values (which can be found in the e1000 datasheet, I don't
> remember them right now).

Totally enough for the purpose, thanks!

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index fbf75fd..739ca10 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6045,7 +6045,7 @@  static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (aspm_disable_flag)
 		e1000e_disable_aspm(pdev, aspm_disable_flag);
 
-	err = pci_enable_device_mem(pdev);
+	err = pci_enable_device(pdev);
 	if (err)
 		return err;
 
@@ -6073,6 +6073,34 @@  static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_pci_reg;
 
+	dev_info(&pdev->dev, "==> e1000e: I/O start 0x%x, len 0x%x\n",
+		 pci_resource_start(pdev, 2),
+		 pci_resource_len(pdev, 2));
+
+
+	{
+		unsigned long ioport_base = pci_resource_start(pdev, 2);
+		dev_info(&pdev->dev, "1. 0x%x 0x%x 0x%x 0x%x\n",
+			 inl(ioport_base),
+			 inl(ioport_base + 4),
+			 inl(ioport_base + 8),
+			 inl(ioport_base + 12));
+		outl(0x38, ioport_base);
+		dev_info(&pdev->dev, "2. 0x%x 0x%x 0x%x 0x%x\n",
+			 inl(ioport_base),
+			 inl(ioport_base + 4),
+			 inl(ioport_base + 8),
+			 inl(ioport_base + 12));
+	}
+
+	err = pci_request_selected_regions_exclusive(pdev,
+						     pci_select_bars(pdev, IORESOURCE_IO),
+						     e1000e_driver_name);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot get I/O region\n");
+		goto err_pci_reg;
+	}
+
 	/* AER (Advanced Error Reporting) hooks */
 	pci_enable_pcie_error_reporting(pdev);