@@ -46,6 +46,7 @@ static struct nouveau_dsm_priv {
bool dsm_detected;
bool optimus_detected;
bool optimus_flags_detected;
+ bool optimus_skip_dsm;
acpi_handle dhandle;
acpi_handle rom_handle;
} nouveau_dsm_priv;
@@ -212,9 +213,26 @@ static const struct vga_switcheroo_handler nouveau_dsm_handler = {
.get_client_id = nouveau_dsm_get_client_id,
};
+/* Firmware supporting Windows 8 or later do not use _DSM to put the device into
+ * D3cold, they instead rely on disabling power resources on the parent. */
+static bool nouveau_pr3_present(struct pci_dev *pdev)
+{
+ struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
+ struct acpi_device *parent_adev;
+
+ if (!parent_pdev)
+ return false;
+
+ parent_adev = ACPI_COMPANION(&parent_pdev->dev);
+ if (!parent_adev)
+ return false;
+
+ return acpi_has_method(parent_adev->handle, "_PR3");
+}
+
static void nouveau_dsm_pci_probe(struct pci_dev *pdev, acpi_handle *dhandle_out,
bool *has_mux, bool *has_opt,
- bool *has_opt_flags)
+ bool *has_opt_flags, bool *has_pr3)
{
acpi_handle dhandle;
bool supports_mux;
@@ -239,6 +257,7 @@ static void nouveau_dsm_pci_probe(struct pci_dev *pdev, acpi_handle *dhandle_out
*has_mux = supports_mux;
*has_opt = !!optimus_funcs;
*has_opt_flags = optimus_funcs & (1 << NOUVEAU_DSM_OPTIMUS_FLAGS);
+ *has_pr3 = false;
if (optimus_funcs) {
uint32_t result;
@@ -248,6 +267,8 @@ static void nouveau_dsm_pci_probe(struct pci_dev *pdev, acpi_handle *dhandle_out
(result & OPTIMUS_ENABLED) ? "enabled" : "disabled",
(result & OPTIMUS_DYNAMIC_PWR_CAP) ? "dynamic power, " : "",
(result & OPTIMUS_HDA_CODEC_MASK) ? "hda bios codec supported" : "");
+
+ *has_pr3 = nouveau_pr3_present(pdev);
}
}
@@ -260,6 +281,7 @@ static bool nouveau_dsm_detect(void)
bool has_mux = false;
bool has_optimus = false;
bool has_optimus_flags = false;
+ bool has_power_resources = false;
int vga_count = 0;
bool guid_valid;
bool ret = false;
@@ -275,14 +297,14 @@ static bool nouveau_dsm_detect(void)
vga_count++;
nouveau_dsm_pci_probe(pdev, &dhandle, &has_mux, &has_optimus,
- &has_optimus_flags);
+ &has_optimus_flags, &has_power_resources);
}
while ((pdev = pci_get_class(PCI_CLASS_DISPLAY_3D << 8, pdev)) != NULL) {
vga_count++;
nouveau_dsm_pci_probe(pdev, &dhandle, &has_mux, &has_optimus,
- &has_optimus_flags);
+ &has_optimus_flags, &has_power_resources);
}
/* find the optimus DSM or the old v1 DSM */
@@ -292,8 +314,11 @@ static bool nouveau_dsm_detect(void)
&buffer);
printk(KERN_INFO "VGA switcheroo: detected Optimus DSM method %s handle\n",
acpi_method_name);
+ if (has_power_resources)
+ pr_info("nouveau: detected PR support, will not use DSM\n");
nouveau_dsm_priv.optimus_detected = true;
nouveau_dsm_priv.optimus_flags_detected = has_optimus_flags;
+ nouveau_dsm_priv.optimus_skip_dsm = has_power_resources;
ret = true;
} else if (vga_count == 2 && has_mux && guid_valid) {
nouveau_dsm_priv.dhandle = dhandle;
@@ -324,7 +349,7 @@ void nouveau_register_dsm_handler(void)
void nouveau_switcheroo_optimus_dsm(void)
{
u32 result = 0;
- if (!nouveau_dsm_priv.optimus_detected)
+ if (!nouveau_dsm_priv.optimus_detected || nouveau_dsm_priv.optimus_skip_dsm)
return;
if (nouveau_dsm_priv.optimus_flags_detected)
Since "PCI: Add runtime PM support for PCIe ports", the parent PCIe port can be runtime-suspended which disables power resources via ACPI. This is incompatible with DSM, resulting in a GPU device which is still in D3 and locks up the kernel on resume (on a Clevo P651RA, GTX965M). Mirror the behavior of Windows 8 and newer[1] (as observed via an AMLi debugger trace) and stop using the DSM functions for D3cold when power resources are available on the parent PCIe port. pci_d3cold_disable() is not used because on some machines, the old DSM method is broken. On a Lenovo T440p (GT 730M) memory and disk corruption would occur, but that is fixed with this patch[2]. [1]: https://msdn.microsoft.com/windows/hardware/drivers/bringup/firmware-requirements-for-d3cold [2]: https://github.com/Bumblebee-Project/bbswitch/issues/78#issuecomment-223549072 v2: simply check directly for _PR3. Added affected machines. Signed-off-by: Peter Wu <peter@lekensteyn.nl> --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-)