diff mbox

[RFC/RFT,3/3] PCI/ACPI: Add ACPI pci_bus_find_numa_node() implementation

Message ID 20170426100619.31758-3-lorenzo.pieralisi@arm.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Lorenzo Pieralisi April 26, 2017, 10:06 a.m. UTC
The introduction of pci_bus_find_numa_node(pci_bus) allows at PCI
host bridge registration to detect the NUMA node for a given
struct pci_bus.dev. Implement an ACPI method that, through
the struct pci_bus.bridge ACPI companion, retrieve and return
the NUMA node corresponding to a given struct pci_bus.dev.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/pci-acpi.c | 20 ++++++++++++++++++++
 include/linux/pci.h    |  6 ++++++
 2 files changed, 26 insertions(+)

Comments

Zhou Wang May 15, 2017, 6:13 a.m. UTC | #1
On 2017/4/26 18:06, Lorenzo Pieralisi wrote:
> The introduction of pci_bus_find_numa_node(pci_bus) allows at PCI
> host bridge registration to detect the NUMA node for a given
> struct pci_bus.dev. Implement an ACPI method that, through
> the struct pci_bus.bridge ACPI companion, retrieve and return
> the NUMA node corresponding to a given struct pci_bus.dev.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> ---
>  drivers/pci/pci-acpi.c | 20 ++++++++++++++++++++
>  include/linux/pci.h    |  6 ++++++
>  2 files changed, 26 insertions(+)
> 
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 0018603..915da79 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -10,6 +10,7 @@
>  #include <linux/delay.h>
>  #include <linux/init.h>
>  #include <linux/irqdomain.h>
> +#include <linux/numa.h>
>  #include <linux/pci.h>
>  #include <linux/msi.h>
>  #include <linux/pci_hotplug.h>
> @@ -853,6 +854,25 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus)
>  	return irq_find_matching_fwnode(fwnode, DOMAIN_BUS_PCI_MSI);
>  }
>  
> +int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
> +{
> +	int node = NUMA_NO_NODE;
> +	struct device *bridge = get_device(bus->bridge);
> +
> +	if (!bridge)
> +		return node;
> +
> +	if (has_acpi_companion(bridge)) {
> +		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
> +
> +		node = acpi_get_node(adev->handle);
> +	}
> +
> +	put_device(bridge);
> +
> +	return node;
> +}
> +

It seems there is no function to call this, am I right?

Another question is that:
in the latest IORT revision C, "Proximity domain" has been added to the IORT spec.
So when we enable NUMA for a PCIe device, should we also consider this?

Thanks,
Zhou

>  static int __init acpi_pci_init(void)
>  {
>  	int ret;
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 9e62462..b40d095 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -1481,6 +1481,12 @@ static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
>  #endif
>  int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
>  #endif
> +#ifdef CONFIG_ACPI
> +int acpi_pci_bus_find_numa_node(struct pci_bus *bus);
> +#else
> +static inline int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
> +{ return NUMA_NO_NODE; }
> +#endif
>  int pci_bus_find_numa_node(struct pci_bus *bus);
>  
>  /* some architectures require additional setup to direct VGA traffic */
>
Lorenzo Pieralisi May 15, 2017, 9:17 a.m. UTC | #2
On Mon, May 15, 2017 at 02:13:47PM +0800, Zhou Wang wrote:
> On 2017/4/26 18:06, Lorenzo Pieralisi wrote:
> > The introduction of pci_bus_find_numa_node(pci_bus) allows at PCI
> > host bridge registration to detect the NUMA node for a given
> > struct pci_bus.dev. Implement an ACPI method that, through
> > the struct pci_bus.bridge ACPI companion, retrieve and return
> > the NUMA node corresponding to a given struct pci_bus.dev.
> > 
> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> > Cc: Bjorn Helgaas <bhelgaas@google.com>
> > ---
> >  drivers/pci/pci-acpi.c | 20 ++++++++++++++++++++
> >  include/linux/pci.h    |  6 ++++++
> >  2 files changed, 26 insertions(+)
> > 
> > diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> > index 0018603..915da79 100644
> > --- a/drivers/pci/pci-acpi.c
> > +++ b/drivers/pci/pci-acpi.c
> > @@ -10,6 +10,7 @@
> >  #include <linux/delay.h>
> >  #include <linux/init.h>
> >  #include <linux/irqdomain.h>
> > +#include <linux/numa.h>
> >  #include <linux/pci.h>
> >  #include <linux/msi.h>
> >  #include <linux/pci_hotplug.h>
> > @@ -853,6 +854,25 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus)
> >  	return irq_find_matching_fwnode(fwnode, DOMAIN_BUS_PCI_MSI);
> >  }
> >  
> > +int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
> > +{
> > +	int node = NUMA_NO_NODE;
> > +	struct device *bridge = get_device(bus->bridge);
> > +
> > +	if (!bridge)
> > +		return node;
> > +
> > +	if (has_acpi_companion(bridge)) {
> > +		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
> > +
> > +		node = acpi_get_node(adev->handle);
> > +	}
> > +
> > +	put_device(bridge);
> > +
> > +	return node;
> > +}
> > +
> 
> It seems there is no function to call this, am I right?

Sorry, I missed updating pci_bus_find_numa_node() while reshuffling
the code, apologies.

I will repost shortly.

> Another question is that: in the latest IORT revision C, "Proximity
> domain" has been added to the IORT spec.  So when we enable NUMA for a
> PCIe device, should we also consider this?

That's for the SMMU device.

Lorenzo

> Thanks,
> Zhou
> 
> >  static int __init acpi_pci_init(void)
> >  {
> >  	int ret;
> > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > index 9e62462..b40d095 100644
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -1481,6 +1481,12 @@ static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> >  #endif
> >  int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
> >  #endif
> > +#ifdef CONFIG_ACPI
> > +int acpi_pci_bus_find_numa_node(struct pci_bus *bus);
> > +#else
> > +static inline int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
> > +{ return NUMA_NO_NODE; }
> > +#endif
> >  int pci_bus_find_numa_node(struct pci_bus *bus);
> >  
> >  /* some architectures require additional setup to direct VGA traffic */
> > 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Zhou Wang May 16, 2017, 3:22 a.m. UTC | #3
On 2017/5/15 17:17, Lorenzo Pieralisi wrote:
> On Mon, May 15, 2017 at 02:13:47PM +0800, Zhou Wang wrote:
>> On 2017/4/26 18:06, Lorenzo Pieralisi wrote:
>>> The introduction of pci_bus_find_numa_node(pci_bus) allows at PCI
>>> host bridge registration to detect the NUMA node for a given
>>> struct pci_bus.dev. Implement an ACPI method that, through
>>> the struct pci_bus.bridge ACPI companion, retrieve and return
>>> the NUMA node corresponding to a given struct pci_bus.dev.
>>>
>>> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>>> ---
>>>  drivers/pci/pci-acpi.c | 20 ++++++++++++++++++++
>>>  include/linux/pci.h    |  6 ++++++
>>>  2 files changed, 26 insertions(+)
>>>
>>> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
>>> index 0018603..915da79 100644
>>> --- a/drivers/pci/pci-acpi.c
>>> +++ b/drivers/pci/pci-acpi.c
>>> @@ -10,6 +10,7 @@
>>>  #include <linux/delay.h>
>>>  #include <linux/init.h>
>>>  #include <linux/irqdomain.h>
>>> +#include <linux/numa.h>
>>>  #include <linux/pci.h>
>>>  #include <linux/msi.h>
>>>  #include <linux/pci_hotplug.h>
>>> @@ -853,6 +854,25 @@ struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus)
>>>  	return irq_find_matching_fwnode(fwnode, DOMAIN_BUS_PCI_MSI);
>>>  }
>>>  
>>> +int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
>>> +{
>>> +	int node = NUMA_NO_NODE;
>>> +	struct device *bridge = get_device(bus->bridge);
>>> +
>>> +	if (!bridge)
>>> +		return node;
>>> +
>>> +	if (has_acpi_companion(bridge)) {
>>> +		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
>>> +
>>> +		node = acpi_get_node(adev->handle);
>>> +	}
>>> +
>>> +	put_device(bridge);
>>> +
>>> +	return node;
>>> +}
>>> +
>>
>> It seems there is no function to call this, am I right?
> 
> Sorry, I missed updating pci_bus_find_numa_node() while reshuffling
> the code, apologies.
> 
> I will repost shortly.
> 
>> Another question is that: in the latest IORT revision C, "Proximity
>> domain" has been added to the IORT spec.  So when we enable NUMA for a
>> PCIe device, should we also consider this?
> 
> That's for the SMMU device.

Sorry, this is another problem. Now I get it that this Proximity domain
is for SMMU itself.

Thanks,
Zhou

> 
> Lorenzo
> 
>> Thanks,
>> Zhou
>>
>>>  static int __init acpi_pci_init(void)
>>>  {
>>>  	int ret;
>>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>>> index 9e62462..b40d095 100644
>>> --- a/include/linux/pci.h
>>> +++ b/include/linux/pci.h
>>> @@ -1481,6 +1481,12 @@ static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
>>>  #endif
>>>  int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
>>>  #endif
>>> +#ifdef CONFIG_ACPI
>>> +int acpi_pci_bus_find_numa_node(struct pci_bus *bus);
>>> +#else
>>> +static inline int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
>>> +{ return NUMA_NO_NODE; }
>>> +#endif
>>>  int pci_bus_find_numa_node(struct pci_bus *bus);
>>>  
>>>  /* some architectures require additional setup to direct VGA traffic */
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> .
>
diff mbox

Patch

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 0018603..915da79 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -10,6 +10,7 @@ 
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/irqdomain.h>
+#include <linux/numa.h>
 #include <linux/pci.h>
 #include <linux/msi.h>
 #include <linux/pci_hotplug.h>
@@ -853,6 +854,25 @@  struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus)
 	return irq_find_matching_fwnode(fwnode, DOMAIN_BUS_PCI_MSI);
 }
 
+int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
+{
+	int node = NUMA_NO_NODE;
+	struct device *bridge = get_device(bus->bridge);
+
+	if (!bridge)
+		return node;
+
+	if (has_acpi_companion(bridge)) {
+		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
+
+		node = acpi_get_node(adev->handle);
+	}
+
+	put_device(bridge);
+
+	return node;
+}
+
 static int __init acpi_pci_init(void)
 {
 	int ret;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 9e62462..b40d095 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1481,6 +1481,12 @@  static inline int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
 #endif
 int pci_bus_find_domain_nr(struct pci_bus *bus, struct device *parent);
 #endif
+#ifdef CONFIG_ACPI
+int acpi_pci_bus_find_numa_node(struct pci_bus *bus);
+#else
+static inline int acpi_pci_bus_find_numa_node(struct pci_bus *bus)
+{ return NUMA_NO_NODE; }
+#endif
 int pci_bus_find_numa_node(struct pci_bus *bus);
 
 /* some architectures require additional setup to direct VGA traffic */