diff mbox

drivers: pci: host: ftpci100: Remove pre-scan bus dependency

Message ID 20170621162651.25315-1-linus.walleij@linaro.org (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Linus Walleij June 21, 2017, 4:26 p.m. UTC
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Remove leftover pci_bus dependencies from the probe path.

We were digging around in config space before the bus was
up so we need to use a few raw accessors and avoid storing
things in the bus structure until the host is initialized.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
This patch on top of Lorenzo's patch series make everything
work fine for me.
---
 drivers/pci/host/pci-ftpci100.c | 53 +++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 21 deletions(-)

Comments

Bjorn Helgaas June 27, 2017, 10:20 p.m. UTC | #1
On Wed, Jun 21, 2017 at 06:26:51PM +0200, Linus Walleij wrote:
> From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> 
> Remove leftover pci_bus dependencies from the probe path.
> 
> We were digging around in config space before the bus was
> up so we need to use a few raw accessors and avoid storing
> things in the bus structure until the host is initialized.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Tested-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Thanks for helping untangle all this, Linus.

I split this into two parts:

  1) the faraday_raw_pci_read_config() stuff, which I folded into the
  "PCI: faraday: Convert IRQ masking to raw PCI config accessors"
  patch from Lorenzo's series.

  2) the bus max/cur clock speed setting, which I folded into the
  "PCI: faraday: Add clock handling" patch that you posted earlier.

I rebased pci/host-faraday on top of pci/enumeration, so I *think*
pci/host-faraday should have everything I know about for the FTPCI100.
Can you double-check it?

https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/commit/?h=pci/host-faraday&id=2e7062416fdff640c5f2ee488690fc5af4b927ff

I'm still hoping to get this all in v4.13.

> ---
> This patch on top of Lorenzo's patch series make everything
> work fine for me.
> ---
>  drivers/pci/host/pci-ftpci100.c | 53 +++++++++++++++++++++++++----------------
>  1 file changed, 32 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-ftpci100.c b/drivers/pci/host/pci-ftpci100.c
> index db31ab21884e..5162dffc102b 100644
> --- a/drivers/pci/host/pci-ftpci100.c
> +++ b/drivers/pci/host/pci-ftpci100.c
> @@ -183,12 +183,11 @@ static int faraday_res_to_memcfg(resource_size_t mem_base,
>  	return 0;
>  }
>  
> -static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
> -				   int config, int size, u32 *value)
> +static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
> +				       unsigned int fn, int config, int size,
> +				       u32 *value)
>  {
> -	struct faraday_pci *p = bus->sysdata;
> -
> -	writel(PCI_CONF_BUS(bus->number) |
> +	writel(PCI_CONF_BUS(bus_number) |
>  			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
>  			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
>  			PCI_CONF_WHERE(config) |
> @@ -202,11 +201,19 @@ static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
>  	else if (size == 2)
>  		*value = (*value >> (8 * (config & 3))) & 0xFFFF;
>  
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
> +				   int config, int size, u32 *value)
> +{
> +	struct faraday_pci *p = bus->sysdata;
> +
>  	dev_dbg(&bus->dev,
>  		"[read]  slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
>  		PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
>  
> -	return PCIBIOS_SUCCESSFUL;
> +	return faraday_raw_pci_read_config(p, bus->number, fn, config, size, value);
>  }
>  
>  static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
> @@ -262,10 +269,10 @@ static void faraday_pci_ack_irq(struct irq_data *d)
>  	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
>  	unsigned int reg;
>  
> -	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
> +	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
>  	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
>  	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
> -	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
> +	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
>  }
>  
>  static void faraday_pci_mask_irq(struct irq_data *d)
> @@ -273,10 +280,10 @@ static void faraday_pci_mask_irq(struct irq_data *d)
>  	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
>  	unsigned int reg;
>  
> -	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
> +	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
>  	reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
>  		 | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
> -	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
> +	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
>  }
>  
>  static void faraday_pci_unmask_irq(struct irq_data *d)
> @@ -284,10 +291,10 @@ static void faraday_pci_unmask_irq(struct irq_data *d)
>  	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
>  	unsigned int reg;
>  
> -	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
> +	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
>  	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
>  	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
> -	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
> +	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
>  }
>  
>  static void faraday_pci_irq_handler(struct irq_desc *desc)
> @@ -296,7 +303,7 @@ static void faraday_pci_irq_handler(struct irq_desc *desc)
>  	struct irq_chip *irqchip = irq_desc_get_chip(desc);
>  	unsigned int irq_stat, reg, i;
>  
> -	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
> +	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
>  	irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
>  
>  	chained_irq_enter(irqchip, desc);
> @@ -417,8 +424,8 @@ static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p,
>  		dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
>  			 i + 1, range.pci_addr, end, val);
>  		if (i <= 2) {
> -			faraday_pci_write_config(p->bus, 0, confreg[i],
> -						 4, val);
> +			faraday_raw_pci_write_config(p, 0, 0, confreg[i],
> +						     4, val);
>  		} else {
>  			dev_err(dev, "ignore extraneous dma-range %d\n", i);
>  			break;
> @@ -443,6 +450,8 @@ static int faraday_pci_probe(struct platform_device *pdev)
>  	struct resource *io;
>  	struct pci_host_bridge *host;
>  	struct clk *clk;
> +	unsigned char max_bus_speed = PCI_SPEED_33MHz;
> +	unsigned char cur_bus_speed = PCI_SPEED_33MHz;
>  	int ret;
>  	u32 val;
>  	LIST_HEAD(res);
> @@ -546,27 +555,27 @@ static int faraday_pci_probe(struct platform_device *pdev)
>  		unsigned long rate;
>  		u32 val;
>  
> -		faraday_pci_read_config(p->bus, 0,
> -					FARADAY_PCI_STATUS_CMD, 4, &val);
> +		faraday_raw_pci_read_config(p, 0, 0,
> +					    FARADAY_PCI_STATUS_CMD, 4, &val);
>  		rate = clk_get_rate(p->bus_clk);
>  
>  		if ((rate == 33000000) && (val & PCI_STATUS_66MHZ_CAPABLE)) {
>  			dev_info(dev, "33MHz bus is 66MHz capable\n");
> -			p->bus->max_bus_speed = PCI_SPEED_66MHz;
> +			max_bus_speed = PCI_SPEED_66MHz;
>  			ret = clk_set_rate(p->bus_clk, 66000000);
>  			if (ret)
>  				dev_err(dev, "failed to set bus clock\n");
>  		} else {
>  			dev_info(dev, "33MHz only bus\n");
> -			p->bus->max_bus_speed = PCI_SPEED_33MHz;
> +			max_bus_speed = PCI_SPEED_33MHz;
>  		}
>  
>  		/* Bumping the clock may fail so read back the rate */
>  		rate = clk_get_rate(p->bus_clk);
>  		if (rate == 33000000)
> -			p->bus->cur_bus_speed = PCI_SPEED_33MHz;
> +			cur_bus_speed = PCI_SPEED_33MHz;
>  		if (rate == 66000000)
> -			p->bus->cur_bus_speed = PCI_SPEED_66MHz;
> +			cur_bus_speed = PCI_SPEED_66MHz;
>  	}
>  
>  	ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);
> @@ -580,6 +589,8 @@ static int faraday_pci_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  	p->bus = host->bus;
> +	p->bus->max_bus_speed = max_bus_speed;
> +	p->bus->cur_bus_speed = cur_bus_speed;
>  
>  	pci_bus_assign_resources(p->bus);
>  	pci_bus_add_devices(p->bus);
> -- 
> 2.9.4
>
diff mbox

Patch

diff --git a/drivers/pci/host/pci-ftpci100.c b/drivers/pci/host/pci-ftpci100.c
index db31ab21884e..5162dffc102b 100644
--- a/drivers/pci/host/pci-ftpci100.c
+++ b/drivers/pci/host/pci-ftpci100.c
@@ -183,12 +183,11 @@  static int faraday_res_to_memcfg(resource_size_t mem_base,
 	return 0;
 }
 
-static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
-				   int config, int size, u32 *value)
+static int faraday_raw_pci_read_config(struct faraday_pci *p, int bus_number,
+				       unsigned int fn, int config, int size,
+				       u32 *value)
 {
-	struct faraday_pci *p = bus->sysdata;
-
-	writel(PCI_CONF_BUS(bus->number) |
+	writel(PCI_CONF_BUS(bus_number) |
 			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
 			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
 			PCI_CONF_WHERE(config) |
@@ -202,11 +201,19 @@  static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
 	else if (size == 2)
 		*value = (*value >> (8 * (config & 3))) & 0xFFFF;
 
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
+				   int config, int size, u32 *value)
+{
+	struct faraday_pci *p = bus->sysdata;
+
 	dev_dbg(&bus->dev,
 		"[read]  slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
 		PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
 
-	return PCIBIOS_SUCCESSFUL;
+	return faraday_raw_pci_read_config(p, bus->number, fn, config, size, value);
 }
 
 static int faraday_raw_pci_write_config(struct faraday_pci *p, int bus_number,
@@ -262,10 +269,10 @@  static void faraday_pci_ack_irq(struct irq_data *d)
 	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
 	unsigned int reg;
 
-	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
 	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
 	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
-	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
 }
 
 static void faraday_pci_mask_irq(struct irq_data *d)
@@ -273,10 +280,10 @@  static void faraday_pci_mask_irq(struct irq_data *d)
 	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
 	unsigned int reg;
 
-	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
 	reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
 		 | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
-	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
 }
 
 static void faraday_pci_unmask_irq(struct irq_data *d)
@@ -284,10 +291,10 @@  static void faraday_pci_unmask_irq(struct irq_data *d)
 	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
 	unsigned int reg;
 
-	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
 	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
 	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
-	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+	faraday_raw_pci_write_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, reg);
 }
 
 static void faraday_pci_irq_handler(struct irq_desc *desc)
@@ -296,7 +303,7 @@  static void faraday_pci_irq_handler(struct irq_desc *desc)
 	struct irq_chip *irqchip = irq_desc_get_chip(desc);
 	unsigned int irq_stat, reg, i;
 
-	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	faraday_raw_pci_read_config(p, 0, 0, FARADAY_PCI_CTRL2, 4, &reg);
 	irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
 
 	chained_irq_enter(irqchip, desc);
@@ -417,8 +424,8 @@  static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p,
 		dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
 			 i + 1, range.pci_addr, end, val);
 		if (i <= 2) {
-			faraday_pci_write_config(p->bus, 0, confreg[i],
-						 4, val);
+			faraday_raw_pci_write_config(p, 0, 0, confreg[i],
+						     4, val);
 		} else {
 			dev_err(dev, "ignore extraneous dma-range %d\n", i);
 			break;
@@ -443,6 +450,8 @@  static int faraday_pci_probe(struct platform_device *pdev)
 	struct resource *io;
 	struct pci_host_bridge *host;
 	struct clk *clk;
+	unsigned char max_bus_speed = PCI_SPEED_33MHz;
+	unsigned char cur_bus_speed = PCI_SPEED_33MHz;
 	int ret;
 	u32 val;
 	LIST_HEAD(res);
@@ -546,27 +555,27 @@  static int faraday_pci_probe(struct platform_device *pdev)
 		unsigned long rate;
 		u32 val;
 
-		faraday_pci_read_config(p->bus, 0,
-					FARADAY_PCI_STATUS_CMD, 4, &val);
+		faraday_raw_pci_read_config(p, 0, 0,
+					    FARADAY_PCI_STATUS_CMD, 4, &val);
 		rate = clk_get_rate(p->bus_clk);
 
 		if ((rate == 33000000) && (val & PCI_STATUS_66MHZ_CAPABLE)) {
 			dev_info(dev, "33MHz bus is 66MHz capable\n");
-			p->bus->max_bus_speed = PCI_SPEED_66MHz;
+			max_bus_speed = PCI_SPEED_66MHz;
 			ret = clk_set_rate(p->bus_clk, 66000000);
 			if (ret)
 				dev_err(dev, "failed to set bus clock\n");
 		} else {
 			dev_info(dev, "33MHz only bus\n");
-			p->bus->max_bus_speed = PCI_SPEED_33MHz;
+			max_bus_speed = PCI_SPEED_33MHz;
 		}
 
 		/* Bumping the clock may fail so read back the rate */
 		rate = clk_get_rate(p->bus_clk);
 		if (rate == 33000000)
-			p->bus->cur_bus_speed = PCI_SPEED_33MHz;
+			cur_bus_speed = PCI_SPEED_33MHz;
 		if (rate == 66000000)
-			p->bus->cur_bus_speed = PCI_SPEED_66MHz;
+			cur_bus_speed = PCI_SPEED_66MHz;
 	}
 
 	ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);
@@ -580,6 +589,8 @@  static int faraday_pci_probe(struct platform_device *pdev)
 		return ret;
 	}
 	p->bus = host->bus;
+	p->bus->max_bus_speed = max_bus_speed;
+	p->bus->cur_bus_speed = cur_bus_speed;
 
 	pci_bus_assign_resources(p->bus);
 	pci_bus_add_devices(p->bus);