diff mbox

PCI: v3-semi: print resources using %pR format string

Message ID 20171011140224.3770968-1-arnd@arndb.de (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Arnd Bergmann Oct. 11, 2017, 2:02 p.m. UTC
A resource_size_t can be 32 or 64 bit on arm32, causing a number
of warnings for incorrect format strings:

In file included from include/linux/printk.h:327:0,
                 from include/linux/kernel.h:13,
                 from include/linux/interrupt.h:5,
                 from drivers/pci/host/pci-v3-semi.c:19:
drivers/pci/host/pci-v3-semi.c: In function 'v3_pci_setup_resource':
drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t {aka long long unsigned int}' [-Werror=format=]
    "I/O window start %08x, bus addr %08x, size %08x\n",
drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]

The best way to print this instead is to pass the resource itself
to printk as a pointerm, using the special '%pR' format string
for pretty-printing the range.

For the bus address, we use %pap, respectively.

Fixes: 132d10e24ff3 ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/pci/host/pci-v3-semi.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

Comments

Linus Walleij Oct. 11, 2017, 7:04 p.m. UTC | #1
On Wed, Oct 11, 2017 at 4:02 PM, Arnd Bergmann <arnd@arndb.de> wrote:

> A resource_size_t can be 32 or 64 bit on arm32, causing a number
> of warnings for incorrect format strings:
>
> In file included from include/linux/printk.h:327:0,
>                  from include/linux/kernel.h:13,
>                  from include/linux/interrupt.h:5,
>                  from drivers/pci/host/pci-v3-semi.c:19:
> drivers/pci/host/pci-v3-semi.c: In function 'v3_pci_setup_resource':
> drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t {aka long long unsigned int}' [-Werror=format=]
>     "I/O window start %08x, bus addr %08x, size %08x\n",
> drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]
>
> The best way to print this instead is to pass the resource itself
> to printk as a pointerm, using the special '%pR' format string
> for pretty-printing the range.
>
> For the bus address, we use %pap, respectively.
>
> Fixes: 132d10e24ff3 ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Ah this again.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Sorry about it, is it that checkpatch doesn't warn for this?

Yours,
Linus Walleij
Arnd Bergmann Oct. 11, 2017, 7:08 p.m. UTC | #2
On Wed, Oct 11, 2017 at 9:04 PM, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Wed, Oct 11, 2017 at 4:02 PM, Arnd Bergmann <arnd@arndb.de> wrote:
>
> Ah this again.
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>
> Sorry about it, is it that checkpatch doesn't warn for this?

I only find this during randconfig builds, I don't think there is an easy way
for checkpatch to find it.

       Arnd
Bjorn Helgaas Oct. 20, 2017, 5:24 p.m. UTC | #3
On Wed, Oct 11, 2017 at 04:02:09PM +0200, Arnd Bergmann wrote:
> A resource_size_t can be 32 or 64 bit on arm32, causing a number
> of warnings for incorrect format strings:
> 
> In file included from include/linux/printk.h:327:0,
>                  from include/linux/kernel.h:13,
>                  from include/linux/interrupt.h:5,
>                  from drivers/pci/host/pci-v3-semi.c:19:
> drivers/pci/host/pci-v3-semi.c: In function 'v3_pci_setup_resource':
> drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t {aka long long unsigned int}' [-Werror=format=]
>     "I/O window start %08x, bus addr %08x, size %08x\n",
> drivers/pci/host/pci-v3-semi.c:536:4: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]
> 
> The best way to print this instead is to pass the resource itself
> to printk as a pointerm, using the special '%pR' format string
> for pretty-printing the range.
> 
> For the bus address, we use %pap, respectively.
> 
> Fixes: 132d10e24ff3 ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I folded this into Linus' original patch, since it hasn't been sent
upstream yet.  Thanks!

> ---
>  drivers/pci/host/pci-v3-semi.c | 24 +++++++++---------------
>  1 file changed, 9 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-v3-semi.c b/drivers/pci/host/pci-v3-semi.c
> index a544d722aef1..02f6e1e3a421 100644
> --- a/drivers/pci/host/pci-v3-semi.c
> +++ b/drivers/pci/host/pci-v3-semi.c
> @@ -532,10 +532,8 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
>  		io->name = "V3 PCI I/O";
>  		v3->io_mem = io_base;
>  		v3->io_bus_addr = io->start - win->offset;
> -		dev_dbg(dev,
> -			"I/O window start %08x, bus addr %08x, size %08x\n",
> -			v3->io_mem, v3->io_bus_addr,
> -			resource_size(io));
> +		dev_dbg(dev, "I/O window %pR, bus addr %pap\n",
> +			io, &v3->io_bus_addr);
>  		ret = pci_remap_iospace(io, io_base);
>  		if (ret) {
>  			dev_warn(dev,
> @@ -556,9 +554,8 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
>  			mem->name = "V3 PCI PRE-MEM";
>  			v3->pre_mem = mem->start;
>  			v3->pre_bus_addr = mem->start - win->offset;
> -			dev_dbg(dev, "PREFETCHABLE MEM window start %08x, bus addr %08x, size %08x\n",
> -				v3->pre_mem, v3->pre_bus_addr,
> -				resource_size(mem));
> +			dev_dbg(dev, "PREFETCHABLE MEM window %pR, bus addr %pap\n",
> +				mem, &v3->pre_bus_addr);
>  			if (resource_size(mem) != SZ_256M) {
>  				dev_err(dev, "prefetchable memory range is not 256MB\n");
>  				return -EINVAL;
> @@ -582,10 +579,8 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
>  			mem->name = "V3 PCI NON-PRE-MEM";
>  			v3->non_pre_mem = mem->start;
>  			v3->non_pre_bus_addr = mem->start - win->offset;
> -			dev_dbg(dev,
> -				"NON-PREFETCHABLE MEM window start %08x, bus addr %08x, size %08x\n",
> -				v3->non_pre_mem, v3->non_pre_bus_addr,
> -				resource_size(mem));
> +			dev_dbg(dev, "NON-PREFETCHABLE MEM window %pR, bus addr %pap\n",
> +				mem, &v3->non_pre_bus_addr);
>  			if (resource_size(mem) != SZ_256M) {
>  				dev_err(dev,
>  					"non-prefetchable memory range is not 256MB\n");
> @@ -602,7 +597,7 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
>  		}
>  		break;
>  	case IORESOURCE_BUS:
> -		dev_dbg(dev, "BUS %d\n", win->res->start);
> +		dev_dbg(dev, "BUS %pR\n", win->res);
>  		host->busnr = win->res->start;
>  		break;
>  	default:
> @@ -781,9 +776,8 @@ static int v3_pci_probe(struct platform_device *pdev)
>  	 * as the physical memory we've remapped it from.
>  	 */
>  	if (readl(v3->base + V3_LB_IO_BASE) != (regs->start >> 16))
> -		dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%08x\n",
> -			readl(v3->base + V3_LB_IO_BASE),
> -			regs->start);
> +		dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%pR\n",
> +			readl(v3->base + V3_LB_IO_BASE), regs);
>  
>  	/* Configuration space is 16MB directly mapped */
>  	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> -- 
> 2.9.0
>
diff mbox

Patch

diff --git a/drivers/pci/host/pci-v3-semi.c b/drivers/pci/host/pci-v3-semi.c
index a544d722aef1..02f6e1e3a421 100644
--- a/drivers/pci/host/pci-v3-semi.c
+++ b/drivers/pci/host/pci-v3-semi.c
@@ -532,10 +532,8 @@  static int v3_pci_setup_resource(struct v3_pci *v3,
 		io->name = "V3 PCI I/O";
 		v3->io_mem = io_base;
 		v3->io_bus_addr = io->start - win->offset;
-		dev_dbg(dev,
-			"I/O window start %08x, bus addr %08x, size %08x\n",
-			v3->io_mem, v3->io_bus_addr,
-			resource_size(io));
+		dev_dbg(dev, "I/O window %pR, bus addr %pap\n",
+			io, &v3->io_bus_addr);
 		ret = pci_remap_iospace(io, io_base);
 		if (ret) {
 			dev_warn(dev,
@@ -556,9 +554,8 @@  static int v3_pci_setup_resource(struct v3_pci *v3,
 			mem->name = "V3 PCI PRE-MEM";
 			v3->pre_mem = mem->start;
 			v3->pre_bus_addr = mem->start - win->offset;
-			dev_dbg(dev, "PREFETCHABLE MEM window start %08x, bus addr %08x, size %08x\n",
-				v3->pre_mem, v3->pre_bus_addr,
-				resource_size(mem));
+			dev_dbg(dev, "PREFETCHABLE MEM window %pR, bus addr %pap\n",
+				mem, &v3->pre_bus_addr);
 			if (resource_size(mem) != SZ_256M) {
 				dev_err(dev, "prefetchable memory range is not 256MB\n");
 				return -EINVAL;
@@ -582,10 +579,8 @@  static int v3_pci_setup_resource(struct v3_pci *v3,
 			mem->name = "V3 PCI NON-PRE-MEM";
 			v3->non_pre_mem = mem->start;
 			v3->non_pre_bus_addr = mem->start - win->offset;
-			dev_dbg(dev,
-				"NON-PREFETCHABLE MEM window start %08x, bus addr %08x, size %08x\n",
-				v3->non_pre_mem, v3->non_pre_bus_addr,
-				resource_size(mem));
+			dev_dbg(dev, "NON-PREFETCHABLE MEM window %pR, bus addr %pap\n",
+				mem, &v3->non_pre_bus_addr);
 			if (resource_size(mem) != SZ_256M) {
 				dev_err(dev,
 					"non-prefetchable memory range is not 256MB\n");
@@ -602,7 +597,7 @@  static int v3_pci_setup_resource(struct v3_pci *v3,
 		}
 		break;
 	case IORESOURCE_BUS:
-		dev_dbg(dev, "BUS %d\n", win->res->start);
+		dev_dbg(dev, "BUS %pR\n", win->res);
 		host->busnr = win->res->start;
 		break;
 	default:
@@ -781,9 +776,8 @@  static int v3_pci_probe(struct platform_device *pdev)
 	 * as the physical memory we've remapped it from.
 	 */
 	if (readl(v3->base + V3_LB_IO_BASE) != (regs->start >> 16))
-		dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%08x\n",
-			readl(v3->base + V3_LB_IO_BASE),
-			regs->start);
+		dev_err(dev, "V3_LB_IO_BASE = %08x but device is @%pR\n",
+			readl(v3->base + V3_LB_IO_BASE), regs);
 
 	/* Configuration space is 16MB directly mapped */
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);