@@ -642,9 +642,8 @@ void acpi_db_display_object_type(char *object_arg)
return;
}
- acpi_os_printf("ADR: %8.8X%8.8X, STA: %8.8X, Flags: %X\n",
- ACPI_FORMAT_UINT64(info->address),
- info->current_status, info->flags);
+ acpi_os_printf("ADR: %8.8X%8.8X, Flags: %X\n",
+ ACPI_FORMAT_UINT64(info->address), info->flags);
acpi_os_printf("S1D-%2.2X S2D-%2.2X S3D-%2.2X S4D-%2.2X\n",
info->highest_dstates[0], info->highest_dstates[1],
@@ -88,10 +88,9 @@ acpi_ns_dump_one_device(acpi_handle obj_handle,
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_TABLES,
- " HID: %s, ADR: %8.8X%8.8X, Status: %X\n",
+ " HID: %s, ADR: %8.8X%8.8X\n",
info->hardware_id.value,
- ACPI_FORMAT_UINT64(info->address),
- info->current_status));
+ ACPI_FORMAT_UINT64(info->address));
ACPI_FREE(info);
}
@@ -241,7 +241,7 @@ static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
* namespace node and possibly by running several standard
* control methods (Such as in the case of a device.)
*
- * For Device and Processor objects, run the Device _HID, _UID, _CID, _STA,
+ * For Device and Processor objects, run the Device _HID, _UID, _CID,
* _CLS, _ADR, _sx_w, and _sx_d methods.
*
* Note: Allocates the return buffer, must be freed by the caller.
@@ -250,8 +250,9 @@ static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
* discovery namespace traversal. Therefore, no complex methods can be
* executed, especially those that access operation regions. Therefore, do
* not add any additional methods that could cause problems in this area.
- * this was the fate of the _SUB method which was found to cause such
- * problems and was removed (11/2015).
+ * Because of this reason support for the following methods has been removed:
+ * 1) _SUB method was removed (11/2015)
+ * 2) _STA method was removed (01/2018)
*
******************************************************************************/
@@ -374,20 +375,8 @@ acpi_get_object_info(acpi_handle handle,
* Notes: none of these methods are required, so they may or may
* not be present for this device. The Info->Valid bitfield is used
* to indicate which methods were found and run successfully.
- *
- * For _STA, if the method does not exist, then (as per the ACPI
- * specification), the returned current_status flags will indicate
- * that the device is present/functional/enabled. Otherwise, the
- * current_status flags reflect the value returned from _STA.
*/
- /* Execute the Device._STA method */
-
- status = acpi_ut_execute_STA(node, &info->current_status);
- if (ACPI_SUCCESS(status)) {
- valid |= ACPI_VALID_STA;
- }
-
/* Execute the Device._ADR method */
status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, node,
@@ -1191,7 +1191,6 @@ struct acpi_device_info {
u8 flags; /* Miscellaneous info */
u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
u8 lowest_dstates[5]; /* _sx_w values: 0xFF indicates not valid */
- u32 current_status; /* _STA value */
u64 address; /* _ADR value */
struct acpi_pnp_device_id hardware_id; /* _HID value */
struct acpi_pnp_device_id unique_id; /* _UID value */
@@ -1205,7 +1204,6 @@ struct acpi_device_info {
/* Flags for Valid field above (acpi_get_object_info) */
-#define ACPI_VALID_STA 0x0001
#define ACPI_VALID_ADR 0x0002
#define ACPI_VALID_HID 0x0004
#define ACPI_VALID_UID 0x0008
As the comment above it indicates, acpi_get_object_info is intended for early probe usage and as such should not call any methods which may rely on OpRegions, before this commit it was also calling _STA, which on some systems does rely on OpRegions. Calling _STA before things are ready leads to errors such as these: [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [GenericSerialBus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) End 2015 support for the _SUB method was removed for exactly the same reason. Removing current_status from struct acpi_device_info only has a limit impact. Within ACPICA it is only used by 2 debug messages, both of which are modified to no longer print it with this commit. Outside of ACPICA, for Linux there is only one user. For which a patch to remove the dependency on the current_status field is available. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/acpi/acpica/dbdisply.c | 5 ++--- drivers/acpi/acpica/nsdumpdv.c | 5 ++--- drivers/acpi/acpica/nsxfname.c | 19 ++++--------------- include/acpi/actypes.h | 2 -- 4 files changed, 8 insertions(+), 23 deletions(-)