@@ -1565,6 +1565,8 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
device_initialize(&device->dev);
dev_set_uevent_suppress(&device->dev, true);
acpi_init_coherency(device);
+ /* Assume there are unmet deps until acpi_device_dep_initialize runs */
+ device->dep_unmet = 1;
}
void acpi_device_add_finalize(struct acpi_device *device)
@@ -1588,6 +1590,14 @@ static int acpi_add_single_object(struct acpi_device **child,
}
acpi_init_device_object(device, handle, type, sta);
+ /*
+ * For ACPI_BUS_TYPE_DEVICE getting the status is delayed till here so
+ * that we can call acpi_bus_get_status and use its quirk handling.
+ * Note this must be done before the get power-/wakeup_dev-flags calls.
+ */
+ if (type == ACPI_BUS_TYPE_DEVICE)
+ acpi_bus_get_status(device);
+
acpi_bus_get_power_flags(device);
acpi_bus_get_wakeup_device_flags(device);
@@ -1660,9 +1670,11 @@ static int acpi_bus_type_and_status(acpi_handle handle, int *type,
return -ENODEV;
*type = ACPI_BUS_TYPE_DEVICE;
- status = acpi_bus_get_status_handle(handle, sta);
- if (ACPI_FAILURE(status))
- *sta = 0;
+ /*
+ * acpi_add_single_object updates this once we've an acpi_device
+ * so that acpi_bus_get_status' quirk handling can be used.
+ */
+ *sta = 0;
break;
case ACPI_TYPE_PROCESSOR:
*type = ACPI_BUS_TYPE_PROCESSOR;
@@ -1760,6 +1772,8 @@ static void acpi_device_dep_initialize(struct acpi_device *adev)
acpi_status status;
int i;
+ adev->dep_unmet = 0;
+
if (!acpi_has_method(adev->handle, "_DEP"))
return;
The acpi_get_bus_status wrapper for acpi_bus_get_status_handle has some code to handle certain device quirks, in some cases we also need this quirk handling for the initial _STA call. Specifically on some devices calling _STA before all _DEP dependencies are met results in errors like these: [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [GenericSerialBus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) acpi_get_bus_status already has code to avoid this, so by using it we also silence these errors from the initial _STA call. Note that in order for the acpi_get_bus_status handling for this to work, we initialize dep_unmet to 1 until acpi_device_dep_initialize gets called, this means that battery devices will be instantiated with an initial status of 0. This is not a problem, acpi_bus_attach will get called soon after the instantiation anyways and it will update the status as first point of order. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Note if we were to: 1) move the acpi_bus_init_power call from acpi_bus_get_power_flags to acpi_bus_attach, which already calls acpi_bus_init_power for uninitialized devices; and 2) move the acpi_bus_get_wakeup_device_flags call from acpi_add_single_object to acpi_bus_attach. This one is tricky, because acpi_device_add checks wakeup.flags.valid which gets set by this. And the acpi_wakeup_gpe_init call actually is the troublesome one because it uses acpi_match_device_ids which relies on the status... Then we can entirely rely on the acpi_bus_get_status call in acpi_bus_attach and remove the acpi_bus_get_status call from the device-instantiation path. --- drivers/acpi/scan.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)