diff mbox

[v4,4/6] PCI: aardvark: Fix PCIe Max Read Request Size setting

Message ID 20180406145536.19637-5-thomas.petazzoni@bootlin.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Thomas Petazzoni April 6, 2018, 2:55 p.m. UTC 
From: Evan Wang <xswang@marvell.com>

There is an obvious typo issue in the definition of the PCIe maximum
read request size: a bit shift is directly used as a value, while it
should be used to shift the correct value.

Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Evan Wang <xswang@marvell.com>
Reviewed-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
 drivers/pci/host/pci-aardvark.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index 7a0ddb709052..9abf549631b4 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -29,6 +29,7 @@ 
 #define     PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT	5
 #define     PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE		(0 << 11)
 #define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT	12
+#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ		0x2
 #define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
 #define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
 #define     PCIE_CORE_LINK_TRAINING				BIT(5)
@@ -295,7 +296,8 @@  static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
 		(7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
 		PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
-		PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT;
+		(PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
+		 PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
 	advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
 
 	/* Program PCIe Control 2 to disable strict ordering */