@@ -10,6 +10,7 @@ config ALPHA
select HAVE_OPROFILE
select HAVE_PCSPKR_PLATFORM
select HAVE_PERF_EVENTS
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
@@ -68,9 +69,6 @@ config ZONE_DMA
config ARCH_DMA_ADDR_T_64BIT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y
@@ -96,6 +96,7 @@ config ARM
select HAVE_VIRT_CPU_ACCOUNTING_GEN
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_REL
+ select NEED_DMA_MAP_STATE
select NO_BOOTMEM
select OF_EARLY_FLATTREE if OF
select OF_RESERVED_MEM if OF
@@ -221,9 +222,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ZONE_DMA
bool
-config NEED_DMA_MAP_STATE
- def_bool y
-
config ARCH_SUPPORTS_UPROBES
def_bool y
@@ -133,6 +133,7 @@ config ARM64
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA
select MULTI_IRQ_HANDLER
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
select NO_BOOTMEM
select OF
@@ -241,9 +242,6 @@ config HAVE_GENERIC_GUP
config ARCH_DMA_ADDR_T_64BIT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config SMP
def_bool y
@@ -54,6 +54,7 @@ config IA64
select MODULES_USE_ELF_RELA
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_ARCH_AUDITSYSCALL
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
default y
help
@@ -82,9 +83,6 @@ config MMU
config ARCH_DMA_ADDR_T_64BIT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config SWIOTLB
bool
@@ -1122,9 +1122,6 @@ config DMA_NONCOHERENT
bool
select NEED_DMA_MAP_STATE
-config NEED_DMA_MAP_STATE
- bool
-
config SYS_HAS_EARLY_PRINTK
bool
@@ -51,6 +51,7 @@ config PARISC
select GENERIC_CLOCKEVENTS
select ARCH_NO_COHERENT_DMA_MMAP
select CPU_NO_EFFICIENT_FFS
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
help
@@ -112,9 +113,6 @@ config PM
config STACKTRACE_SUPPORT
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
config ISA_DMA_API
bool
@@ -711,6 +711,7 @@ menuconfig PCI
select PCI_MSI
select IOMMU_HELPER
select IOMMU_SUPPORT
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
help
@@ -736,9 +737,6 @@ config PCI_DOMAINS
config HAS_IOMEM
def_bool PCI
-config NEED_DMA_MAP_STATE
- def_bool PCI
-
config CHSC_SCH
def_tristate m
prompt "Support for CHSC subchannels"
@@ -50,6 +50,7 @@ config SUPERH
select HAVE_ARCH_AUDITSYSCALL
select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_NMI
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
help
@@ -162,9 +163,6 @@ config DMA_COHERENT
config DMA_NONCOHERENT
def_bool !DMA_COHERENT
-config NEED_DMA_MAP_STATE
- def_bool DMA_NONCOHERENT
-
config PGTABLE_LEVELS
default 3 if X2TLB
default 2
@@ -44,6 +44,7 @@ config SPARC
select ARCH_HAS_SG_CHAIN
select CPU_NO_EFFICIENT_FFS
select LOCKDEP_SMALL if LOCKDEP
+ select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
config SPARC32
@@ -144,9 +145,6 @@ config ZONE_DMA
bool
default y if SPARC32
-config NEED_DMA_MAP_STATE
- def_bool y
-
config GENERIC_ISA_DMA
bool
default y if SPARC32
@@ -19,6 +19,7 @@ config UNICORE32
select ARCH_WANT_FRAME_POINTERS
select GENERIC_IOMAP
select MODULES_USE_ELF_REL
+ select NEED_DMA_MAP_STATE
help
UniCore-32 is 32-bit Instruction Set Architecture,
including a series of low-power-consumption RISC chip
@@ -61,9 +62,6 @@ config ARCH_MAY_HAVE_PC_FDC
config ZONE_DMA
def_bool y
-config NEED_DMA_MAP_STATE
- def_bool y
-
source "init/Kconfig"
source "kernel/Kconfig.freezer"
@@ -28,6 +28,7 @@ config X86_64
select ARCH_USE_CMPXCHG_LOCKREF
select HAVE_ARCH_SOFT_DIRTY
select MODULES_USE_ELF_RELA
+ select NEED_DMA_MAP_STATE
select X86_DEV_DMA_OPS
select ARCH_HAS_SYSCALL_WRAPPER
@@ -236,10 +237,6 @@ config ARCH_MMAP_RND_COMPAT_BITS_MAX
config SBUS
bool
-config NEED_DMA_MAP_STATE
- def_bool y
- depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB
-
config GENERIC_ISA_DMA
def_bool y
depends on ISA_DMA_API
@@ -922,6 +919,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
def_bool y if X86_64
+ select NEED_DMA_MAP_STATE
---help---
Support for software bounce buffers used on x86-64 systems
which don't have a hardware IOMMU. Using this PCI devices
@@ -146,6 +146,7 @@ config INTEL_IOMMU
select DMA_DIRECT_OPS
select IOMMU_API
select IOMMU_IOVA
+ select NEED_DMA_MAP_STATE
select DMAR_TABLE
help
DMA remapping (DMAR) devices support enables independent address
@@ -839,7 +839,7 @@ static inline int dma_mmap_wc(struct device *dev,
#define dma_mmap_writecombine dma_mmap_wc
#endif
-#if defined(CONFIG_NEED_DMA_MAP_STATE) || defined(CONFIG_DMA_API_DEBUG)
+#ifdef CONFIG_NEED_DMA_MAP_STATE
#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME
#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME
#define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
@@ -432,6 +432,9 @@ config SGL_ALLOC
config NEED_SG_DMA_LENGTH
bool
+config NEED_DMA_MAP_STATE
+ bool
+
config IOMMU_HELPER
bool
@@ -1635,6 +1635,7 @@ config PROVIDE_OHCI1394_DMA_INIT
config DMA_API_DEBUG
bool "Enable debugging of DMA-API usage"
depends on HAVE_DMA_API_DEBUG
+ select NEED_DMA_MAP_STATE
help
Enable this option to debug the use of the DMA API by device drivers.
With this option you will be able to detect common bugs in device