diff mbox

PCI: shpchp: Fix probing logic inversion

Message ID 20180625133313.GL2558@lahna.fi.intel.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Mika Westerberg June 25, 2018, 1:33 p.m. UTC
On Mon, Jun 25, 2018 at 02:13:26PM +0100, Marc Zyngier wrote:
> On 25/06/18 13:52, Mika Westerberg wrote:
> > On Thu, Jun 21, 2018 at 05:47:15PM +0100, Marc Zyngier wrote:
> >> Until recently, shpc_probe() would bail out pretty early in the
> >> absence of the SHPC capability. A logic change in the way the
> >> driver now checks that capability makes it go and probe the
> >> firmware anyway, with ugly consequences if the system is not
> >> ACPI based (my arm64 ThunderX is DT driven, and explodes in
> >> a spectacular way after getting a NULL root bridge from the
> >> non-existent ACPI tables...).
> > 
> > Could you share log from the failure? I would like to understand a bit
> > better where it crashes and why.
> 
> Here you go:
> 
> [   12.330017] pcieport 0008:1f:00.0: enabling device (0506 -> 0507)
> [   12.336315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
> [   12.345104] Mem abort info:
> [   12.347895]   ESR = 0x96000004
> [   12.350945]   Exception class = DABT (current EL), IL = 32 bits
> [   12.356860]   SET = 0, FnV = 0
> [   12.359910]   EA = 0, S1PTW = 0
> [   12.363046] Data abort info:
> [   12.365922]   ISV = 0, ISS = 0x00000004
> [   12.369748]   CM = 0, WnR = 0
> [   12.372712] [0000000000000058] user address but active_mm is swapper
> [   12.379063] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [   12.384625] Modules linked in:
> [   12.387676] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.18.0-rc1-00006-ga2c5c6a64fb6 #10
> [   12.395929] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017
> [   12.403408] Workqueue: events work_for_cpu_fn
> [   12.407758] pstate: 60000005 (nZCv daif -PAN -UAO)
> [   12.412544] pc : acpi_get_hp_hw_control_from_firmware+0xa0/0x2b0
> [   12.418541] lr : acpi_get_hp_hw_control_from_firmware+0xa0/0x2b0
> [   12.424537] sp : ffff00000a613c60
> [   12.427841] x29: ffff00000a613c60 x28: 0000000000000000 
> [   12.433147] x27: ffff800fbeb8d0b0 x26: ffff00000982a068 
> [   12.438453] x25: 0000000000000000 x24: ffff000009feb898 
> [   12.443759] x23: 0000000000000000 x22: ffff000009808000 
> [   12.449064] x21: ffff0000098dee98 x20: ffff810fa60d9000 
> [   12.454370] x19: 0000000000000000 x18: ffffffffffffffff 
> [   12.459675] x17: 0000000000000e00 x16: 0000000000000020 
> [   12.464981] x15: ffff000009808648 x14: ffff000089a31b8f 
> [   12.470286] x13: 0000000000000000 x12: 0000000000000040 
> [   12.475591] x11: 000000000000004c x10: 0000000000000a20 
> [   12.480897] x9 : ffff00000a613d30 x8 : 0000000000000000 
> [   12.486202] x7 : ffff000009808648 x6 : 0000000000000057 
> [   12.491508] x5 : 0000000000000010 x4 : 000000000000001f 
> [   12.496813] x3 : 0000000000000000 x2 : 0d68a3f9b2251000 
> [   12.502118] x1 : 0000000000000000 x0 : 0000000000000000 
> [   12.507425] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____))
> [   12.514289] Call trace:
> [   12.516727]  acpi_get_hp_hw_control_from_firmware+0xa0/0x2b0
> [   12.522377]  shpc_probe+0x48/0x3b0
> [   12.525772]  local_pci_probe+0x44/0xb0
> [   12.529511]  work_for_cpu_fn+0x20/0x30
> [   12.533252]  process_one_work+0x208/0x480
> [   12.537251]  worker_thread+0x254/0x448
> [   12.540992]  kthread+0x104/0x130
> [   12.544212]  ret_from_fork+0x10/0x1c
> [   12.547779] Code: f100427f 54000040 f85f8260 94009f63 (b9405800) 
> [   12.553866] ---[ end trace 8ee5b8cc95cd4f02 ]---
> 
> >> Take this opportunity to move the call to shpchp_is_native()
> >> back into shpc_probe(), making it clear that a non-ACPI system
> >> is not expected to use this driver.
> > 
> > It is fine to use SHPC in non-ACPI systems. However, in ACPI systems we
> > should negotiate whether it is the OS or the firmware who handles it.
> Fair enough. In which case we should at the very least make sure
> we can handle acpi_pci_find_root() returning NULL (which is what
> generates the crash in my case).

Agreed. Can you try if the below patch fixes the issue for you?
diff mbox

Patch

diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 3979f89b250a..73bc92cf0594 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -88,6 +88,9 @@  int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev)
 
 	/* If _OSC exists, we should not evaluate OSHP */
 	host = pci_find_host_bridge(pdev->bus);
+	if (!ACPI_HANDLE(&host->dev))
+		return 0;
+
 	root = acpi_pci_find_root(ACPI_HANDLE(&host->dev));
 	if (root->osc_support_set)
 		goto no_control;