diff mbox series

[RFC,39/40] arm64: dts: k3-am6: Add SERDES DT node

Message ID 20180921102155.22839-40-kishon@ti.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series Cleanup pci-keystone.c and Add AM654 PCIe Support | expand

Commit Message

Kishon Vijay Abraham I Sept. 21, 2018, 10:21 a.m. UTC
Add DT node for SERDES0 and SERDES1.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 46 ++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 4379c370f6f8..b08d15fa110e 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -4,11 +4,25 @@ 
  *
  * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
  */
+#include <dt-bindings/phy/phy-am654-serdes.h>
 
 &cbass_main {
 	scm_conf: scm_conf@100000 {
 		compatible = "syscon", "simple-mfd";
 		reg = <0 0x00100000 0 0x1c000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes0_clk: serdes_clk@4080 {
+			compatible = "syscon";
+			reg = <0x00004080 0x4>;
+		};
+
+		serdes1_clk: serdes_clk@4090 {
+			compatible = "syscon";
+			reg = <0x00004090 0x4>;
+		};
 
 		serdes_mux: mux-controller {
 			compatible = "mmio-mux";
@@ -53,6 +67,38 @@ 
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	serdes0: serdes@900000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x900000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 153>;
+		clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
+		clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+		assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+		ti,serdes-clk = <&serdes0_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 0>;
+		status = "disabled";
+	};
+
+	serdes1: serdes@910000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x910000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 154>;
+		clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
+		clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
+		assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
+		ti,serdes-clk = <&serdes1_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 1>;
+		status = "disabled";
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;