diff mbox series

[V5,26/27] PCI: tegra: Add support for GPIO based PERST#

Message ID 20190617173952.29363-27-mmaddireddy@nvidia.com (mailing list archive)
State Superseded, archived
Headers show
Series Enable Tegra PCIe root port features | expand

Commit Message

Manikanta Maddireddy June 17, 2019, 5:39 p.m. UTC 
Tegra PCIe has fixed per port SFIO line to signal PERST#, which can be
controlled by AFI port register. However, if a platform routes a different
GPIO to the PCIe slot, then port register cannot control it. Add support
for GPIO based PERST# signal for such platforms. GPIO number comes from per
port PCIe device tree node. PCIe driver probe doesn't fail if per port
"reset-gpios" property is not populated, make sure that DT property is not
missed for such platforms.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
V5:
* Updated reset gpio toggle logic to reflect active low usage
* Replaced kasprintf() with devm_kasprintf()
* Updated commit message with more information.

V4: Using devm_gpiod_get_from_of_node() to get reset-gpios

V3: Using helper function to get reset-gpios

V2: Using standard "reset-gpio" property

 drivers/pci/controller/pci-tegra.c | 45 ++++++++++++++++++++++++++----
 1 file changed, 39 insertions(+), 6 deletions(-)

Comments

Thierry Reding June 18, 2019, 10:51 a.m. UTC | #1 
On Mon, Jun 17, 2019 at 11:09:51PM +0530, Manikanta Maddireddy wrote:
> Tegra PCIe has fixed per port SFIO line to signal PERST#, which can be
> controlled by AFI port register. However, if a platform routes a different
> GPIO to the PCIe slot, then port register cannot control it. Add support
> for GPIO based PERST# signal for such platforms. GPIO number comes from per
> port PCIe device tree node. PCIe driver probe doesn't fail if per port
> "reset-gpios" property is not populated, make sure that DT property is not
> missed for such platforms.
> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
> V5:
> * Updated reset gpio toggle logic to reflect active low usage
> * Replaced kasprintf() with devm_kasprintf()
> * Updated commit message with more information.
> 
> V4: Using devm_gpiod_get_from_of_node() to get reset-gpios
> 
> V3: Using helper function to get reset-gpios
> 
> V2: Using standard "reset-gpio" property
> 
>  drivers/pci/controller/pci-tegra.c | 45 ++++++++++++++++++++++++++----
>  1 file changed, 39 insertions(+), 6 deletions(-)

Acked-by: Thierry Reding <treding@nvidia.com>
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index d3b9e6440dd6..2e55d64a0428 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -17,6 +17,7 @@ 
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/export.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/iopoll.h>
 #include <linux/irq.h>
@@ -400,6 +401,8 @@  struct tegra_pcie_port {
 	unsigned int lanes;
 
 	struct phy **phys;
+
+	struct gpio_desc *reset_gpio;
 };
 
 struct tegra_pcie_bus {
@@ -545,15 +548,23 @@  static void tegra_pcie_port_reset(struct tegra_pcie_port *port)
 	unsigned long value;
 
 	/* pulse reset signal */
-	value = afi_readl(port->pcie, ctrl);
-	value &= ~AFI_PEX_CTRL_RST;
-	afi_writel(port->pcie, value, ctrl);
+	if (port->reset_gpio) {
+		gpiod_set_value(port->reset_gpio, 1);
+	} else {
+		value = afi_readl(port->pcie, ctrl);
+		value &= ~AFI_PEX_CTRL_RST;
+		afi_writel(port->pcie, value, ctrl);
+	}
 
 	usleep_range(1000, 2000);
 
-	value = afi_readl(port->pcie, ctrl);
-	value |= AFI_PEX_CTRL_RST;
-	afi_writel(port->pcie, value, ctrl);
+	if (port->reset_gpio) {
+		gpiod_set_value(port->reset_gpio, 0);
+	} else {
+		value = afi_readl(port->pcie, ctrl);
+		value |= AFI_PEX_CTRL_RST;
+		afi_writel(port->pcie, value, ctrl);
+	}
 }
 
 static void tegra_pcie_enable_rp_features(struct tegra_pcie_port *port)
@@ -2200,6 +2211,7 @@  static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		struct tegra_pcie_port *rp;
 		unsigned int index;
 		u32 value;
+		char *label;
 
 		err = of_pci_get_devfn(port);
 		if (err < 0) {
@@ -2258,6 +2270,27 @@  static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		if (IS_ERR(rp->base))
 			return PTR_ERR(rp->base);
 
+		label = devm_kasprintf(dev, GFP_KERNEL, "pex-reset-%u", index);
+		if (!label) {
+			dev_err(dev, "failed to create reset GPIO label\n");
+			return -ENOMEM;
+		}
+
+		/*
+		 * Returns null if reset-gpios property is not populated and
+		 * fall back to using AFI per port register to toggle PERST#
+		 * SFIO line.
+		 */
+		rp->reset_gpio = devm_gpiod_get_from_of_node(dev, port,
+							     "reset-gpios", 0,
+							     GPIOD_OUT_LOW,
+							     label);
+		if (IS_ERR(rp->reset_gpio)) {
+			err = PTR_ERR(rp->reset_gpio);
+			dev_err(dev, "failed to get reset GPIO: %d\n", err);
+			return err;
+		}
+
 		list_add_tail(&rp->list, &pcie->ports);
 	}