diff mbox series

[01/10] PCI: designware-ep: Add multiple PFs support for DWC

Message ID 20190815083716.4715-1-xiaowei.bao@nxp.com (mailing list archive)
State Superseded, archived
Headers show
Series [01/10] PCI: designware-ep: Add multiple PFs support for DWC | expand

Commit Message

Xiaowei Bao Aug. 15, 2019, 8:37 a.m. UTC
Add multiple PFs support for DWC, different PF have different config space,
we use pf-offset property which get from the DTS to access the different pF
config space.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c |  97 +++++++++++++---------
 drivers/pci/controller/dwc/pcie-designware.c    | 105 ++++++++++++++++++++++--
 drivers/pci/controller/dwc/pcie-designware.h    |  10 ++-
 include/linux/pci-epc.h                         |   1 +
 4 files changed, 164 insertions(+), 49 deletions(-)

Comments

Andrew Murray Aug. 15, 2019, 11:31 a.m. UTC | #1
On Thu, Aug 15, 2019 at 04:37:07PM +0800, Xiaowei Bao wrote:
> Add multiple PFs support for DWC, different PF have different config space,
> we use pf-offset property which get from the DTS to access the different pF
> config space.

Thanks for the patch. I haven't seen a cover letter for this series, is there
one missing?


> 
> Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> ---
>  drivers/pci/controller/dwc/pcie-designware-ep.c |  97 +++++++++++++---------
>  drivers/pci/controller/dwc/pcie-designware.c    | 105 ++++++++++++++++++++++--
>  drivers/pci/controller/dwc/pcie-designware.h    |  10 ++-
>  include/linux/pci-epc.h                         |   1 +
>  4 files changed, 164 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index 2bf5a35..75e2955 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -19,12 +19,14 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
>  	pci_epc_linkup(epc);
>  }
>  
> -static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar,
> -				   int flags)
> +static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
> +				   enum pci_barno bar, int flags)
>  {
>  	u32 reg;
> +	struct pci_epc *epc = pci->ep.epc;
> +	u32 pf_base = func_no * epc->pf_offset;
>  
> -	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> +	reg = pf_base + PCI_BASE_ADDRESS_0 + (4 * bar);

I think I'd rather see this arithmetic (and the one for determining pf_base)
inside a macro or inline header function. This would make this code more readable
and reduce the chances of an error by avoiding duplication of code.

For example look at cdns_pcie_ep_fn_writeb and ROCKCHIP_PCIE_EP_FUNC_BASE for
examples of other EP drivers that do this.


>  	dw_pcie_dbi_ro_wr_en(pci);
>  	dw_pcie_writel_dbi2(pci, reg, 0x0);
>  	dw_pcie_writel_dbi(pci, reg, 0x0);
> @@ -37,7 +39,12 @@ static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar,
>  
>  void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
>  {
> -	__dw_pcie_ep_reset_bar(pci, bar, 0);
> +	u8 func_no, funcs;
> +
> +	funcs = pci->ep.epc->max_functions;
> +
> +	for (func_no = 0; func_no < funcs; func_no++)
> +		__dw_pcie_ep_reset_bar(pci, func_no, bar, 0);
>  }
>  
>  static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
> @@ -78,28 +85,29 @@ static int dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,
>  {
>  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	u32 pf_base = func_no * epc->pf_offset;
>  
>  	dw_pcie_dbi_ro_wr_en(pci);
> -	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
> -	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
> -	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
> -	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
> -	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
> +	dw_pcie_writew_dbi(pci, pf_base + PCI_VENDOR_ID, hdr->vendorid);
> +	dw_pcie_writew_dbi(pci, pf_base + PCI_DEVICE_ID, hdr->deviceid);
> +	dw_pcie_writeb_dbi(pci, pf_base + PCI_REVISION_ID, hdr->revid);
> +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CLASS_PROG, hdr->progif_code);
> +	dw_pcie_writew_dbi(pci, pf_base + PCI_CLASS_DEVICE,
>  			   hdr->subclass_code | hdr->baseclass_code << 8);
> -	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
> +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CACHE_LINE_SIZE,
>  			   hdr->cache_line_size);
> -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
> +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_VENDOR_ID,
>  			   hdr->subsys_vendor_id);
> -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
> -	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
> +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_ID, hdr->subsys_id);
> +	dw_pcie_writeb_dbi(pci, pf_base + PCI_INTERRUPT_PIN,
>  			   hdr->interrupt_pin);
>  	dw_pcie_dbi_ro_wr_dis(pci);
>  
>  	return 0;
>  }
>  
> -static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
> -				  dma_addr_t cpu_addr,
> +static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no,
> +				  enum pci_barno bar, dma_addr_t cpu_addr,
>  				  enum dw_pcie_as_type as_type)
>  {
>  	int ret;
> @@ -112,7 +120,7 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
>  		return -EINVAL;
>  	}
>  
> -	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
> +	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, bar, cpu_addr,
>  				       as_type);
>  	if (ret < 0) {
>  		dev_err(pci->dev, "Failed to program IB window\n");
> @@ -125,7 +133,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
>  	return 0;
>  }
>  
> -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
> +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
> +				   phys_addr_t phys_addr,
>  				   u64 pci_addr, size_t size)
>  {
>  	u32 free_win;
> @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
>  		return -EINVAL;
>  	}
>  
> -	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> -				  phys_addr, pci_addr, size);
> +	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM,
> +				     phys_addr, pci_addr, size);
>  
>  	set_bit(free_win, ep->ob_window_map);
>  	ep->outbound_addr[free_win] = phys_addr;
> @@ -154,7 +163,7 @@ static void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
>  	enum pci_barno bar = epf_bar->barno;
>  	u32 atu_index = ep->bar_to_atu[bar];
>  
> -	__dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags);
> +	__dw_pcie_ep_reset_bar(pci, func_no, bar, epf_bar->flags);
>  
>  	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
>  	clear_bit(atu_index, ep->ib_window_map);
> @@ -170,14 +179,16 @@ static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
>  	size_t size = epf_bar->size;
>  	int flags = epf_bar->flags;
>  	enum dw_pcie_as_type as_type;
> -	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> +	u32 pf_base = func_no * epc->pf_offset;
> +	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar) + pf_base;
>  
>  	if (!(flags & PCI_BASE_ADDRESS_SPACE))
>  		as_type = DW_PCIE_AS_MEM;
>  	else
>  		as_type = DW_PCIE_AS_IO;
>  
> -	ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr, as_type);
> +	ret = dw_pcie_ep_inbound_atu(ep, func_no, bar,
> +				     epf_bar->phys_addr, as_type);
>  	if (ret)
>  		return ret;
>  
> @@ -235,7 +246,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no,
>  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>  
> -	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> +	ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr, size);
>  	if (ret) {
>  		dev_err(pci->dev, "Failed to enable address\n");
>  		return ret;
> @@ -248,12 +259,13 @@ static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no)
>  {
>  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	u32 pf_base = func_no * epc->pf_offset;
>  	u32 val, reg;
>  
>  	if (!ep->msi_cap)
>  		return -EINVAL;
>  
> -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
>  	val = dw_pcie_readw_dbi(pci, reg);
>  	if (!(val & PCI_MSI_FLAGS_ENABLE))
>  		return -EINVAL;
> @@ -267,12 +279,13 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
>  {
>  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	u32 pf_base = func_no * epc->pf_offset;
>  	u32 val, reg;
>  
>  	if (!ep->msi_cap)
>  		return -EINVAL;
>  
> -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
>  	val = dw_pcie_readw_dbi(pci, reg);
>  	val &= ~PCI_MSI_FLAGS_QMASK;
>  	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
> @@ -287,12 +300,13 @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
>  {
>  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	u32 pf_base = func_no * epc->pf_offset;
>  	u32 val, reg;
>  
>  	if (!ep->msix_cap)
>  		return -EINVAL;
>  
> -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
>  	val = dw_pcie_readw_dbi(pci, reg);
>  	if (!(val & PCI_MSIX_FLAGS_ENABLE))
>  		return -EINVAL;
> @@ -306,12 +320,13 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
>  {
>  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +	u32 pf_base = func_no * epc->pf_offset;
>  	u32 val, reg;
>  
>  	if (!ep->msix_cap)
>  		return -EINVAL;
>  
> -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
>  	val = dw_pcie_readw_dbi(pci, reg);
>  	val &= ~PCI_MSIX_FLAGS_QSIZE;
>  	val |= interrupts;
> @@ -400,6 +415,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
>  	unsigned int aligned_offset;
>  	u16 msg_ctrl, msg_data;
>  	u32 msg_addr_lower, msg_addr_upper, reg;
> +	u32 pf_base = func_no * epc->pf_offset;
>  	u64 msg_addr;
>  	bool has_upper;
>  	int ret;
> @@ -408,19 +424,19 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
>  		return -EINVAL;
>  
>  	/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */
> -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
>  	msg_ctrl = dw_pcie_readw_dbi(pci, reg);
>  	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
> -	reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
> +	reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_LO;
>  	msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
>  	if (has_upper) {
> -		reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
> +		reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_HI;
>  		msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
> -		reg = ep->msi_cap + PCI_MSI_DATA_64;
> +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_64;
>  		msg_data = dw_pcie_readw_dbi(pci, reg);
>  	} else {
>  		msg_addr_upper = 0;
> -		reg = ep->msi_cap + PCI_MSI_DATA_32;
> +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_32;
>  		msg_data = dw_pcie_readw_dbi(pci, reg);
>  	}
>  	aligned_offset = msg_addr_lower & (epc->mem->page_size - 1);
> @@ -439,7 +455,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
>  }
>  
>  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> -			     u16 interrupt_num)
> +			      u16 interrupt_num)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
>  	struct pci_epc *epc = ep->epc;
> @@ -447,16 +463,17 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
>  	u32 bar_addr_upper, bar_addr_lower;
>  	u32 msg_addr_upper, msg_addr_lower;
>  	u32 reg, msg_data, vec_ctrl;
> +	u32 pf_base = func_no * epc->pf_offset;
>  	u64 tbl_addr, msg_addr, reg_u64;
>  	void __iomem *msix_tbl;
>  	int ret;
>  
> -	reg = ep->msix_cap + PCI_MSIX_TABLE;
> +	reg = ep->msix_cap + pf_base + PCI_MSIX_TABLE;
>  	tbl_offset = dw_pcie_readl_dbi(pci, reg);
>  	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
>  	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
>  
> -	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
> +	reg = PCI_BASE_ADDRESS_0 + pf_base + (4 * bir);
>  	bar_addr_upper = 0;
>  	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
>  	reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
> @@ -592,13 +609,17 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
>  	ep->epc = epc;
>  	epc_set_drvdata(epc, ep);
>  
> -	if (ep->ops->ep_init)
> -		ep->ops->ep_init(ep);
> -
>  	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
>  	if (ret < 0)
>  		epc->max_functions = 1;
>  
> +	ret = of_property_read_u32(np, "pf-offset", &epc->pf_offset);
> +	if (ret < 0)
> +		epc->pf_offset = 0;

Bad things will likely happen if max_functions > 1 and pf-offset isn't set.
I think the driver should bail in this situation. It would be very easy
for someone to misconfigure this.


> +
> +	if (ep->ops->ep_init)
> +		ep->ops->ep_init(ep);
> +
>  	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
>  				 ep->page_size);
>  	if (ret < 0) {
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 7d25102..c99cee4 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -158,6 +158,43 @@ static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
>  	dw_pcie_writel_atu(pci, offset + reg, val);
>  }
>  
> +static void dw_pcie_prog_ep_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> +						int index, int type,
> +						u64 cpu_addr, u64 pci_addr,
> +						u32 size)
> +{
> +	u32 retries, val;
> +
> +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
> +				 lower_32_bits(cpu_addr));
> +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
> +				 upper_32_bits(cpu_addr));
> +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
> +				 lower_32_bits(cpu_addr + size - 1));
> +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
> +				 lower_32_bits(pci_addr));
> +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> +				 upper_32_bits(pci_addr));
> +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> +				 type | PCIE_ATU_FUNC_NUM(func_no));

With the exception of this line, the rest of this function is identical to
dw_pcie_prog_outbound_atu_unroll.

> +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> +				 PCIE_ATU_ENABLE);
> +
> +	/*
> +	 * Make sure ATU enable takes effect before any subsequent config
> +	 * and I/O accesses.
> +	 */
> +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> +		val = dw_pcie_readl_ob_unroll(pci, index,
> +					      PCIE_ATU_UNR_REGION_CTRL2);
> +		if (val & PCIE_ATU_ENABLE)
> +			return;
> +
> +		mdelay(LINK_WAIT_IATU);
> +	}
> +	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> +}
> +
>  static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
>  					     int type, u64 cpu_addr,
>  					     u64 pci_addr, u32 size)
> @@ -194,6 +231,51 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
>  	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
>  }
>  
> +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> +				  int type, u64 cpu_addr, u64 pci_addr,
> +				  u32 size)
> +{
> +	u32 retries, val;
> +
> +	if (pci->ops->cpu_addr_fixup)
> +		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
> +
> +	if (pci->iatu_unroll_enabled) {
> +		dw_pcie_prog_ep_outbound_atu_unroll(pci, func_no, index, type,
> +						    cpu_addr, pci_addr, size);
> +		return;
> +	}
> +
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> +			   PCIE_ATU_REGION_OUTBOUND | index);
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
> +			   lower_32_bits(cpu_addr));
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
> +			   upper_32_bits(cpu_addr));
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> +			   lower_32_bits(cpu_addr + size - 1));
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> +			   lower_32_bits(pci_addr));
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> +			   upper_32_bits(pci_addr));
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> +			   PCIE_ATU_FUNC_NUM(func_no));

The same here, this is identical to dw_pcie_prog_outbound_atu with the
exception of this line.

Is there a way you can avoid all of this duplicated code?

Thanks,

Andrew Murray 

> +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
> +
> +	/*
> +	 * Make sure ATU enable takes effect before any subsequent config
> +	 * and I/O accesses.
> +	 */
> +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> +		if (val & PCIE_ATU_ENABLE)
> +			return;
> +
> +		mdelay(LINK_WAIT_IATU);
> +	}
> +	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> +}
> +
>  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
>  			       u64 cpu_addr, u64 pci_addr, u32 size)
>  {
> @@ -252,8 +334,8 @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
>  	dw_pcie_writel_atu(pci, offset + reg, val);
>  }
>  
> -static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> -					   int bar, u64 cpu_addr,
> +static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
> +					   int index, int bar, u64 cpu_addr,
>  					   enum dw_pcie_as_type as_type)
>  {
>  	int type;
> @@ -275,8 +357,10 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
>  		return -EINVAL;
>  	}
>  
> -	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
> +	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type |
> +				 PCIE_ATU_FUNC_NUM(func_no));
>  	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> +				 PCIE_ATU_FUNC_NUM_MATCH_EN |
>  				 PCIE_ATU_ENABLE |
>  				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
>  
> @@ -297,14 +381,15 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
>  	return -EBUSY;
>  }
>  
> -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> -			     u64 cpu_addr, enum dw_pcie_as_type as_type)
> +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> +			     int bar, u64 cpu_addr,
> +			     enum dw_pcie_as_type as_type)
>  {
>  	int type;
>  	u32 retries, val;
>  
>  	if (pci->iatu_unroll_enabled)
> -		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
> +		return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index, bar,
>  						       cpu_addr, as_type);
>  
>  	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
> @@ -323,9 +408,11 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
>  		return -EINVAL;
>  	}
>  
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
> -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
> -			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> +			   PCIE_ATU_FUNC_NUM(func_no));
> +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
> +			   PCIE_ATU_FUNC_NUM_MATCH_EN |
> +			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
>  
>  	/*
>  	 * Make sure ATU enable takes effect before any subsequent config
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index ffed084..2b291e8 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -71,9 +71,11 @@
>  #define PCIE_ATU_TYPE_IO		0x2
>  #define PCIE_ATU_TYPE_CFG0		0x4
>  #define PCIE_ATU_TYPE_CFG1		0x5
> +#define PCIE_ATU_FUNC_NUM(pf)           (pf << 20)
>  #define PCIE_ATU_CR2			0x908
>  #define PCIE_ATU_ENABLE			BIT(31)
>  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> +#define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
>  #define PCIE_ATU_LOWER_BASE		0x90C
>  #define PCIE_ATU_UPPER_BASE		0x910
>  #define PCIE_ATU_LIMIT			0x914
> @@ -265,8 +267,12 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci);
>  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
>  			       int type, u64 cpu_addr, u64 pci_addr,
>  			       u32 size);
> -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> -			     u64 cpu_addr, enum dw_pcie_as_type as_type);
> +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> +				  int type, u64 cpu_addr, u64 pci_addr,
> +				  u32 size);
> +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> +			     int bar, u64 cpu_addr,
> +			     enum dw_pcie_as_type as_type);
>  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
>  			 enum dw_pcie_region_type type);
>  void dw_pcie_setup(struct dw_pcie *pci);
> diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
> index f641bad..fc2feee 100644
> --- a/include/linux/pci-epc.h
> +++ b/include/linux/pci-epc.h
> @@ -96,6 +96,7 @@ struct pci_epc {
>  	const struct pci_epc_ops	*ops;
>  	struct pci_epc_mem		*mem;
>  	u8				max_functions;
> +	u32				pf_offset;
>  	struct config_group		*group;
>  	/* spinlock to protect against concurrent access of EP controller */
>  	spinlock_t			lock;
> -- 
> 2.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Xiaowei Bao Aug. 16, 2019, 2:55 a.m. UTC | #2
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年8月15日 19:32
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> lorenzo.pieralisi@arm.com; arnd@arndb.de; gregkh@linuxfoundation.org;
> M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>;
> Roy Zang <roy.zang@nxp.com>; linux-pci@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
> Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs support for
> DWC
> 
> On Thu, Aug 15, 2019 at 04:37:07PM +0800, Xiaowei Bao wrote:
> > Add multiple PFs support for DWC, different PF have different config
> > space, we use pf-offset property which get from the DTS to access the
> > different pF config space.
> 
> Thanks for the patch. I haven't seen a cover letter for this series, is there one
> missing?
Maybe I miss, I will add you to review next time, thanks a lot for your comments.
> 
> 
> >
> > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > ---
> >  drivers/pci/controller/dwc/pcie-designware-ep.c |  97
> +++++++++++++---------
> >  drivers/pci/controller/dwc/pcie-designware.c    | 105
> ++++++++++++++++++++++--
> >  drivers/pci/controller/dwc/pcie-designware.h    |  10 ++-
> >  include/linux/pci-epc.h                         |   1 +
> >  4 files changed, 164 insertions(+), 49 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 2bf5a35..75e2955 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -19,12 +19,14 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
> >  	pci_epc_linkup(epc);
> >  }
> >
> > -static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno
> bar,
> > -				   int flags)
> > +static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
> > +				   enum pci_barno bar, int flags)
> >  {
> >  	u32 reg;
> > +	struct pci_epc *epc = pci->ep.epc;
> > +	u32 pf_base = func_no * epc->pf_offset;
> >
> > -	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > +	reg = pf_base + PCI_BASE_ADDRESS_0 + (4 * bar);
> 
> I think I'd rather see this arithmetic (and the one for determining pf_base)
> inside a macro or inline header function. This would make this code more
> readable and reduce the chances of an error by avoiding duplication of code.
> 
> For example look at cdns_pcie_ep_fn_writeb and
> ROCKCHIP_PCIE_EP_FUNC_BASE for examples of other EP drivers that do
> this.
Agree, this looks fine, thanks a lot for your comments, I will use this way to access
the registers in next version patch.
> 
> 
> >  	dw_pcie_dbi_ro_wr_en(pci);
> >  	dw_pcie_writel_dbi2(pci, reg, 0x0);
> >  	dw_pcie_writel_dbi(pci, reg, 0x0);
> > @@ -37,7 +39,12 @@ static void __dw_pcie_ep_reset_bar(struct dw_pcie
> > *pci, enum pci_barno bar,
> >
> >  void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)  {
> > -	__dw_pcie_ep_reset_bar(pci, bar, 0);
> > +	u8 func_no, funcs;
> > +
> > +	funcs = pci->ep.epc->max_functions;
> > +
> > +	for (func_no = 0; func_no < funcs; func_no++)
> > +		__dw_pcie_ep_reset_bar(pci, func_no, bar, 0);
> >  }
> >
> >  static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
> > @@ -78,28 +85,29 @@ static int dw_pcie_ep_write_header(struct pci_epc
> > *epc, u8 func_no,  {
> >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	u32 pf_base = func_no * epc->pf_offset;
> >
> >  	dw_pcie_dbi_ro_wr_en(pci);
> > -	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
> > -	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
> > -	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
> > -	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
> > -	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
> > +	dw_pcie_writew_dbi(pci, pf_base + PCI_VENDOR_ID, hdr->vendorid);
> > +	dw_pcie_writew_dbi(pci, pf_base + PCI_DEVICE_ID, hdr->deviceid);
> > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_REVISION_ID, hdr->revid);
> > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CLASS_PROG, hdr->progif_code);
> > +	dw_pcie_writew_dbi(pci, pf_base + PCI_CLASS_DEVICE,
> >  			   hdr->subclass_code | hdr->baseclass_code << 8);
> > -	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
> > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CACHE_LINE_SIZE,
> >  			   hdr->cache_line_size);
> > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
> > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_VENDOR_ID,
> >  			   hdr->subsys_vendor_id);
> > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
> > -	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
> > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_ID,
> hdr->subsys_id);
> > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_INTERRUPT_PIN,
> >  			   hdr->interrupt_pin);
> >  	dw_pcie_dbi_ro_wr_dis(pci);
> >
> >  	return 0;
> >  }
> >
> > -static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum
> pci_barno bar,
> > -				  dma_addr_t cpu_addr,
> > +static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no,
> > +				  enum pci_barno bar, dma_addr_t cpu_addr,
> >  				  enum dw_pcie_as_type as_type)
> >  {
> >  	int ret;
> > @@ -112,7 +120,7 @@ static int dw_pcie_ep_inbound_atu(struct
> dw_pcie_ep *ep, enum pci_barno bar,
> >  		return -EINVAL;
> >  	}
> >
> > -	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
> > +	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, bar,
> > +cpu_addr,
> >  				       as_type);
> >  	if (ret < 0) {
> >  		dev_err(pci->dev, "Failed to program IB window\n"); @@ -125,7
> > +133,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep,
> enum pci_barno bar,
> >  	return 0;
> >  }
> >
> > -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t
> > phys_addr,
> > +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
> > +				   phys_addr_t phys_addr,
> >  				   u64 pci_addr, size_t size)
> >  {
> >  	u32 free_win;
> > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> dw_pcie_ep *ep, phys_addr_t phys_addr,
> >  		return -EINVAL;
> >  	}
> >
> > -	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> > -				  phys_addr, pci_addr, size);
> > +	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win,
> PCIE_ATU_TYPE_MEM,
> > +				     phys_addr, pci_addr, size);
> >
> >  	set_bit(free_win, ep->ob_window_map);
> >  	ep->outbound_addr[free_win] = phys_addr; @@ -154,7 +163,7 @@
> static
> > void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
> >  	enum pci_barno bar = epf_bar->barno;
> >  	u32 atu_index = ep->bar_to_atu[bar];
> >
> > -	__dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags);
> > +	__dw_pcie_ep_reset_bar(pci, func_no, bar, epf_bar->flags);
> >
> >  	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
> >  	clear_bit(atu_index, ep->ib_window_map); @@ -170,14 +179,16 @@
> > static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
> >  	size_t size = epf_bar->size;
> >  	int flags = epf_bar->flags;
> >  	enum dw_pcie_as_type as_type;
> > -	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > +	u32 pf_base = func_no * epc->pf_offset;
> > +	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar) + pf_base;
> >
> >  	if (!(flags & PCI_BASE_ADDRESS_SPACE))
> >  		as_type = DW_PCIE_AS_MEM;
> >  	else
> >  		as_type = DW_PCIE_AS_IO;
> >
> > -	ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr, as_type);
> > +	ret = dw_pcie_ep_inbound_atu(ep, func_no, bar,
> > +				     epf_bar->phys_addr, as_type);
> >  	if (ret)
> >  		return ret;
> >
> > @@ -235,7 +246,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc
> *epc, u8 func_no,
> >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> >
> > -	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> > +	ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr, size);
> >  	if (ret) {
> >  		dev_err(pci->dev, "Failed to enable address\n");
> >  		return ret;
> > @@ -248,12 +259,13 @@ static int dw_pcie_ep_get_msi(struct pci_epc
> > *epc, u8 func_no)  {
> >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	u32 pf_base = func_no * epc->pf_offset;
> >  	u32 val, reg;
> >
> >  	if (!ep->msi_cap)
> >  		return -EINVAL;
> >
> > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> >  	val = dw_pcie_readw_dbi(pci, reg);
> >  	if (!(val & PCI_MSI_FLAGS_ENABLE))
> >  		return -EINVAL;
> > @@ -267,12 +279,13 @@ static int dw_pcie_ep_set_msi(struct pci_epc
> > *epc, u8 func_no, u8 interrupts)  {
> >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	u32 pf_base = func_no * epc->pf_offset;
> >  	u32 val, reg;
> >
> >  	if (!ep->msi_cap)
> >  		return -EINVAL;
> >
> > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> >  	val = dw_pcie_readw_dbi(pci, reg);
> >  	val &= ~PCI_MSI_FLAGS_QMASK;
> >  	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; @@ -287,12 +300,13
> > @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)  {
> >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	u32 pf_base = func_no * epc->pf_offset;
> >  	u32 val, reg;
> >
> >  	if (!ep->msix_cap)
> >  		return -EINVAL;
> >
> > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> >  	val = dw_pcie_readw_dbi(pci, reg);
> >  	if (!(val & PCI_MSIX_FLAGS_ENABLE))
> >  		return -EINVAL;
> > @@ -306,12 +320,13 @@ static int dw_pcie_ep_set_msix(struct pci_epc
> > *epc, u8 func_no, u16 interrupts)  {
> >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > +	u32 pf_base = func_no * epc->pf_offset;
> >  	u32 val, reg;
> >
> >  	if (!ep->msix_cap)
> >  		return -EINVAL;
> >
> > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> >  	val = dw_pcie_readw_dbi(pci, reg);
> >  	val &= ~PCI_MSIX_FLAGS_QSIZE;
> >  	val |= interrupts;
> > @@ -400,6 +415,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep
> *ep, u8 func_no,
> >  	unsigned int aligned_offset;
> >  	u16 msg_ctrl, msg_data;
> >  	u32 msg_addr_lower, msg_addr_upper, reg;
> > +	u32 pf_base = func_no * epc->pf_offset;
> >  	u64 msg_addr;
> >  	bool has_upper;
> >  	int ret;
> > @@ -408,19 +424,19 @@ int dw_pcie_ep_raise_msi_irq(struct
> dw_pcie_ep *ep, u8 func_no,
> >  		return -EINVAL;
> >
> >  	/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */
> > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> >  	msg_ctrl = dw_pcie_readw_dbi(pci, reg);
> >  	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
> > -	reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
> > +	reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_LO;
> >  	msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
> >  	if (has_upper) {
> > -		reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
> > +		reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_HI;
> >  		msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
> > -		reg = ep->msi_cap + PCI_MSI_DATA_64;
> > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_64;
> >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> >  	} else {
> >  		msg_addr_upper = 0;
> > -		reg = ep->msi_cap + PCI_MSI_DATA_32;
> > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_32;
> >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> >  	}
> >  	aligned_offset = msg_addr_lower & (epc->mem->page_size - 1); @@
> > -439,7 +455,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep,
> > u8 func_no,  }
> >
> >  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> > -			     u16 interrupt_num)
> > +			      u16 interrupt_num)
> >  {
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> >  	struct pci_epc *epc = ep->epc;
> > @@ -447,16 +463,17 @@ int dw_pcie_ep_raise_msix_irq(struct
> dw_pcie_ep *ep, u8 func_no,
> >  	u32 bar_addr_upper, bar_addr_lower;
> >  	u32 msg_addr_upper, msg_addr_lower;
> >  	u32 reg, msg_data, vec_ctrl;
> > +	u32 pf_base = func_no * epc->pf_offset;
> >  	u64 tbl_addr, msg_addr, reg_u64;
> >  	void __iomem *msix_tbl;
> >  	int ret;
> >
> > -	reg = ep->msix_cap + PCI_MSIX_TABLE;
> > +	reg = ep->msix_cap + pf_base + PCI_MSIX_TABLE;
> >  	tbl_offset = dw_pcie_readl_dbi(pci, reg);
> >  	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
> >  	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
> >
> > -	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
> > +	reg = PCI_BASE_ADDRESS_0 + pf_base + (4 * bir);
> >  	bar_addr_upper = 0;
> >  	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
> >  	reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
> @@
> > -592,13 +609,17 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> >  	ep->epc = epc;
> >  	epc_set_drvdata(epc, ep);
> >
> > -	if (ep->ops->ep_init)
> > -		ep->ops->ep_init(ep);
> > -
> >  	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
> >  	if (ret < 0)
> >  		epc->max_functions = 1;
> >
> > +	ret = of_property_read_u32(np, "pf-offset", &epc->pf_offset);
> > +	if (ret < 0)
> > +		epc->pf_offset = 0;
> 
> Bad things will likely happen if max_functions > 1 and pf-offset isn't set.
> I think the driver should bail in this situation. It would be very easy for
> someone to misconfigure this.
Yes, you are right, but if the max-functions have defined in DTS, require the pf-offset
must define in DTS, I am not sure the correct value of pf-offsetfor other platforms, 
so I think the max-functions and pf-offset should not have the dependence.
even though I didn't define pf-offset when I defined max-functions, the pf-offset is 0, 
the DWC ep driver can continue run the progress of INIT but not return, of course, 
thus the PF1 will not work, I don't know which way is better.
> 
> 
> > +
> > +	if (ep->ops->ep_init)
> > +		ep->ops->ep_init(ep);
> > +
> >  	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
> >  				 ep->page_size);
> >  	if (ret < 0) {
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > b/drivers/pci/controller/dwc/pcie-designware.c
> > index 7d25102..c99cee4 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -158,6 +158,43 @@ static void dw_pcie_writel_ob_unroll(struct
> dw_pcie *pci, u32 index, u32 reg,
> >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> >
> > +static void dw_pcie_prog_ep_outbound_atu_unroll(struct dw_pcie *pci, u8
> func_no,
> > +						int index, int type,
> > +						u64 cpu_addr, u64 pci_addr,
> > +						u32 size)
> > +{
> > +	u32 retries, val;
> > +
> > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
> > +				 lower_32_bits(cpu_addr));
> > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
> > +				 upper_32_bits(cpu_addr));
> > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
> > +				 lower_32_bits(cpu_addr + size - 1));
> > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
> > +				 lower_32_bits(pci_addr));
> > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> > +				 upper_32_bits(pci_addr));
> > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> > +				 type | PCIE_ATU_FUNC_NUM(func_no));
> 
> With the exception of this line, the rest of this function is identical to
> dw_pcie_prog_outbound_atu_unroll.
Yes, I can integrate the same code, but I think we'd better use the different outbound 
window set function between RC and EP, because the RC don't need the func_num parameter.
> 
> > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> > +				 PCIE_ATU_ENABLE);
> > +
> > +	/*
> > +	 * Make sure ATU enable takes effect before any subsequent config
> > +	 * and I/O accesses.
> > +	 */
> > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> > +		val = dw_pcie_readl_ob_unroll(pci, index,
> > +					      PCIE_ATU_UNR_REGION_CTRL2);
> > +		if (val & PCIE_ATU_ENABLE)
> > +			return;
> > +
> > +		mdelay(LINK_WAIT_IATU);
> > +	}
> > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > +
> >  static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int
> index,
> >  					     int type, u64 cpu_addr,
> >  					     u64 pci_addr, u32 size)
> > @@ -194,6 +231,51 @@ static void
> dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> >  	dev_err(pci->dev, "Outbound iATU is not being enabled\n");  }
> >
> > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
> > +				  int type, u64 cpu_addr, u64 pci_addr,
> > +				  u32 size)
> > +{
> > +	u32 retries, val;
> > +
> > +	if (pci->ops->cpu_addr_fixup)
> > +		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
> > +
> > +	if (pci->iatu_unroll_enabled) {
> > +		dw_pcie_prog_ep_outbound_atu_unroll(pci, func_no, index, type,
> > +						    cpu_addr, pci_addr, size);
> > +		return;
> > +	}
> > +
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > +			   PCIE_ATU_REGION_OUTBOUND | index);
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
> > +			   lower_32_bits(cpu_addr));
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
> > +			   upper_32_bits(cpu_addr));
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> > +			   lower_32_bits(cpu_addr + size - 1));
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> > +			   lower_32_bits(pci_addr));
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> > +			   upper_32_bits(pci_addr));
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > +			   PCIE_ATU_FUNC_NUM(func_no));
> 
> The same here, this is identical to dw_pcie_prog_outbound_atu with the
> exception of this line.
> 
> Is there a way you can avoid all of this duplicated code?
As above, I can integrate the same code, but I keep to think the different outbound 
Window set function should be used between RC and EP.
> 
> Thanks,
> 
> Andrew Murray
> 
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
> > +
> > +	/*
> > +	 * Make sure ATU enable takes effect before any subsequent config
> > +	 * and I/O accesses.
> > +	 */
> > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> > +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> > +		if (val & PCIE_ATU_ENABLE)
> > +			return;
> > +
> > +		mdelay(LINK_WAIT_IATU);
> > +	}
> > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > +
> >  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
> >  			       u64 cpu_addr, u64 pci_addr, u32 size)  { @@ -252,8
> +334,8
> > @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index,
> u32 reg,
> >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> >
> > -static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> > -					   int bar, u64 cpu_addr,
> > +static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, u8
> func_no,
> > +					   int index, int bar, u64 cpu_addr,
> >  					   enum dw_pcie_as_type as_type)  {
> >  	int type;
> > @@ -275,8 +357,10 @@ static int dw_pcie_prog_inbound_atu_unroll(struct
> dw_pcie *pci, int index,
> >  		return -EINVAL;
> >  	}
> >
> > -	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> type);
> > +	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> type |
> > +				 PCIE_ATU_FUNC_NUM(func_no));
> >  	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> > +				 PCIE_ATU_FUNC_NUM_MATCH_EN |
> >  				 PCIE_ATU_ENABLE |
> >  				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> >
> > @@ -297,14 +381,15 @@ static int
> dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> >  	return -EBUSY;
> >  }
> >
> > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > -			     u64 cpu_addr, enum dw_pcie_as_type as_type)
> > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > +			     int bar, u64 cpu_addr,
> > +			     enum dw_pcie_as_type as_type)
> >  {
> >  	int type;
> >  	u32 retries, val;
> >
> >  	if (pci->iatu_unroll_enabled)
> > -		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
> > +		return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index, bar,
> >  						       cpu_addr, as_type);
> >
> >  	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> PCIE_ATU_REGION_INBOUND |
> > @@ -323,9 +408,11 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie
> *pci, int index, int bar,
> >  		return -EINVAL;
> >  	}
> >
> > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
> > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
> > -			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > +			   PCIE_ATU_FUNC_NUM(func_no));
> > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
> > +			   PCIE_ATU_FUNC_NUM_MATCH_EN |
> > +			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> >
> >  	/*
> >  	 * Make sure ATU enable takes effect before any subsequent config
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> > b/drivers/pci/controller/dwc/pcie-designware.h
> > index ffed084..2b291e8 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -71,9 +71,11 @@
> >  #define PCIE_ATU_TYPE_IO		0x2
> >  #define PCIE_ATU_TYPE_CFG0		0x4
> >  #define PCIE_ATU_TYPE_CFG1		0x5
> > +#define PCIE_ATU_FUNC_NUM(pf)           (pf << 20)
> >  #define PCIE_ATU_CR2			0x908
> >  #define PCIE_ATU_ENABLE			BIT(31)
> >  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> > +#define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
> >  #define PCIE_ATU_LOWER_BASE		0x90C
> >  #define PCIE_ATU_UPPER_BASE		0x910
> >  #define PCIE_ATU_LIMIT			0x914
> > @@ -265,8 +267,12 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci);
> > void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> >  			       int type, u64 cpu_addr, u64 pci_addr,
> >  			       u32 size);
> > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > -			     u64 cpu_addr, enum dw_pcie_as_type as_type);
> > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
> > +				  int type, u64 cpu_addr, u64 pci_addr,
> > +				  u32 size);
> > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > +			     int bar, u64 cpu_addr,
> > +			     enum dw_pcie_as_type as_type);
> >  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> >  			 enum dw_pcie_region_type type);
> >  void dw_pcie_setup(struct dw_pcie *pci); diff --git
> > a/include/linux/pci-epc.h b/include/linux/pci-epc.h index
> > f641bad..fc2feee 100644
> > --- a/include/linux/pci-epc.h
> > +++ b/include/linux/pci-epc.h
> > @@ -96,6 +96,7 @@ struct pci_epc {
> >  	const struct pci_epc_ops	*ops;
> >  	struct pci_epc_mem		*mem;
> >  	u8				max_functions;
> > +	u32				pf_offset;
> >  	struct config_group		*group;
> >  	/* spinlock to protect against concurrent access of EP controller */
> >  	spinlock_t			lock;
> > --
> > 2.9.5
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists
> > .infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&amp;data=02%
> 7C0
> >
> 1%7Cxiaowei.bao%40nxp.com%7C0e39168f6f144db6840308d721742040%7
> C686ea1d
> >
> 3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637014654998524452&amp;sd
> ata=bP7eh
> > cjlGXCMVFE2b4f12Q6fGV7lQ%2F5i9qIi9FoPlbI%3D&amp;reserved=0
Andrew Murray Aug. 16, 2019, 9:44 a.m. UTC | #3
On Fri, Aug 16, 2019 at 02:55:41AM +0000, Xiaowei Bao wrote:
> 
> 
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray@arm.com>
> > Sent: 2019年8月15日 19:32
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> > bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> > lorenzo.pieralisi@arm.com; arnd@arndb.de; gregkh@linuxfoundation.org;
> > M.h. Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>;
> > Roy Zang <roy.zang@nxp.com>; linux-pci@vger.kernel.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
> > Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs support for
> > DWC
> > 
> > On Thu, Aug 15, 2019 at 04:37:07PM +0800, Xiaowei Bao wrote:
> > > Add multiple PFs support for DWC, different PF have different config
> > > space, we use pf-offset property which get from the DTS to access the
> > > different pF config space.
> > 
> > Thanks for the patch. I haven't seen a cover letter for this series, is there one
> > missing?
> Maybe I miss, I will add you to review next time, thanks a lot for your comments.
> > 
> > 
> > >
> > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > ---
> > >  drivers/pci/controller/dwc/pcie-designware-ep.c |  97
> > +++++++++++++---------
> > >  drivers/pci/controller/dwc/pcie-designware.c    | 105
> > ++++++++++++++++++++++--
> > >  drivers/pci/controller/dwc/pcie-designware.h    |  10 ++-
> > >  include/linux/pci-epc.h                         |   1 +
> > >  4 files changed, 164 insertions(+), 49 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > index 2bf5a35..75e2955 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > @@ -19,12 +19,14 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
> > >  	pci_epc_linkup(epc);
> > >  }
> > >
> > > -static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno
> > bar,
> > > -				   int flags)
> > > +static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
> > > +				   enum pci_barno bar, int flags)
> > >  {
> > >  	u32 reg;
> > > +	struct pci_epc *epc = pci->ep.epc;
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >
> > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > +	reg = pf_base + PCI_BASE_ADDRESS_0 + (4 * bar);
> > 
> > I think I'd rather see this arithmetic (and the one for determining pf_base)
> > inside a macro or inline header function. This would make this code more
> > readable and reduce the chances of an error by avoiding duplication of code.
> > 
> > For example look at cdns_pcie_ep_fn_writeb and
> > ROCKCHIP_PCIE_EP_FUNC_BASE for examples of other EP drivers that do
> > this.
> Agree, this looks fine, thanks a lot for your comments, I will use this way to access
> the registers in next version patch.
> > 
> > 
> > >  	dw_pcie_dbi_ro_wr_en(pci);
> > >  	dw_pcie_writel_dbi2(pci, reg, 0x0);
> > >  	dw_pcie_writel_dbi(pci, reg, 0x0);
> > > @@ -37,7 +39,12 @@ static void __dw_pcie_ep_reset_bar(struct dw_pcie
> > > *pci, enum pci_barno bar,
> > >
> > >  void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)  {
> > > -	__dw_pcie_ep_reset_bar(pci, bar, 0);
> > > +	u8 func_no, funcs;
> > > +
> > > +	funcs = pci->ep.epc->max_functions;
> > > +
> > > +	for (func_no = 0; func_no < funcs; func_no++)
> > > +		__dw_pcie_ep_reset_bar(pci, func_no, bar, 0);
> > >  }
> > >
> > >  static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
> > > @@ -78,28 +85,29 @@ static int dw_pcie_ep_write_header(struct pci_epc
> > > *epc, u8 func_no,  {
> > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >
> > >  	dw_pcie_dbi_ro_wr_en(pci);
> > > -	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
> > > -	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
> > > -	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
> > > -	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
> > > -	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
> > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_VENDOR_ID, hdr->vendorid);
> > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_DEVICE_ID, hdr->deviceid);
> > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_REVISION_ID, hdr->revid);
> > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CLASS_PROG, hdr->progif_code);
> > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_CLASS_DEVICE,
> > >  			   hdr->subclass_code | hdr->baseclass_code << 8);
> > > -	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
> > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CACHE_LINE_SIZE,
> > >  			   hdr->cache_line_size);
> > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
> > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_VENDOR_ID,
> > >  			   hdr->subsys_vendor_id);
> > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
> > > -	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
> > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_ID,
> > hdr->subsys_id);
> > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_INTERRUPT_PIN,
> > >  			   hdr->interrupt_pin);
> > >  	dw_pcie_dbi_ro_wr_dis(pci);
> > >
> > >  	return 0;
> > >  }
> > >
> > > -static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum
> > pci_barno bar,
> > > -				  dma_addr_t cpu_addr,
> > > +static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no,
> > > +				  enum pci_barno bar, dma_addr_t cpu_addr,
> > >  				  enum dw_pcie_as_type as_type)
> > >  {
> > >  	int ret;
> > > @@ -112,7 +120,7 @@ static int dw_pcie_ep_inbound_atu(struct
> > dw_pcie_ep *ep, enum pci_barno bar,
> > >  		return -EINVAL;
> > >  	}
> > >
> > > -	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
> > > +	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, bar,
> > > +cpu_addr,
> > >  				       as_type);
> > >  	if (ret < 0) {
> > >  		dev_err(pci->dev, "Failed to program IB window\n"); @@ -125,7
> > > +133,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep,
> > enum pci_barno bar,
> > >  	return 0;
> > >  }
> > >
> > > -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t
> > > phys_addr,
> > > +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
> > > +				   phys_addr_t phys_addr,
> > >  				   u64 pci_addr, size_t size)
> > >  {
> > >  	u32 free_win;
> > > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> > dw_pcie_ep *ep, phys_addr_t phys_addr,
> > >  		return -EINVAL;
> > >  	}
> > >
> > > -	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> > > -				  phys_addr, pci_addr, size);
> > > +	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win,
> > PCIE_ATU_TYPE_MEM,
> > > +				     phys_addr, pci_addr, size);
> > >
> > >  	set_bit(free_win, ep->ob_window_map);
> > >  	ep->outbound_addr[free_win] = phys_addr; @@ -154,7 +163,7 @@
> > static
> > > void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
> > >  	enum pci_barno bar = epf_bar->barno;
> > >  	u32 atu_index = ep->bar_to_atu[bar];
> > >
> > > -	__dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags);
> > > +	__dw_pcie_ep_reset_bar(pci, func_no, bar, epf_bar->flags);
> > >
> > >  	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
> > >  	clear_bit(atu_index, ep->ib_window_map); @@ -170,14 +179,16 @@
> > > static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
> > >  	size_t size = epf_bar->size;
> > >  	int flags = epf_bar->flags;
> > >  	enum dw_pcie_as_type as_type;
> > > -	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > > +	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar) + pf_base;
> > >
> > >  	if (!(flags & PCI_BASE_ADDRESS_SPACE))
> > >  		as_type = DW_PCIE_AS_MEM;
> > >  	else
> > >  		as_type = DW_PCIE_AS_IO;
> > >
> > > -	ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr, as_type);
> > > +	ret = dw_pcie_ep_inbound_atu(ep, func_no, bar,
> > > +				     epf_bar->phys_addr, as_type);
> > >  	if (ret)
> > >  		return ret;
> > >
> > > @@ -235,7 +246,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc
> > *epc, u8 func_no,
> > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > >
> > > -	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> > > +	ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr, size);
> > >  	if (ret) {
> > >  		dev_err(pci->dev, "Failed to enable address\n");
> > >  		return ret;
> > > @@ -248,12 +259,13 @@ static int dw_pcie_ep_get_msi(struct pci_epc
> > > *epc, u8 func_no)  {
> > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >  	u32 val, reg;
> > >
> > >  	if (!ep->msi_cap)
> > >  		return -EINVAL;
> > >
> > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > >  	val = dw_pcie_readw_dbi(pci, reg);
> > >  	if (!(val & PCI_MSI_FLAGS_ENABLE))
> > >  		return -EINVAL;
> > > @@ -267,12 +279,13 @@ static int dw_pcie_ep_set_msi(struct pci_epc
> > > *epc, u8 func_no, u8 interrupts)  {
> > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >  	u32 val, reg;
> > >
> > >  	if (!ep->msi_cap)
> > >  		return -EINVAL;
> > >
> > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > >  	val = dw_pcie_readw_dbi(pci, reg);
> > >  	val &= ~PCI_MSI_FLAGS_QMASK;
> > >  	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; @@ -287,12 +300,13
> > > @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)  {
> > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >  	u32 val, reg;
> > >
> > >  	if (!ep->msix_cap)
> > >  		return -EINVAL;
> > >
> > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > >  	val = dw_pcie_readw_dbi(pci, reg);
> > >  	if (!(val & PCI_MSIX_FLAGS_ENABLE))
> > >  		return -EINVAL;
> > > @@ -306,12 +320,13 @@ static int dw_pcie_ep_set_msix(struct pci_epc
> > > *epc, u8 func_no, u16 interrupts)  {
> > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >  	u32 val, reg;
> > >
> > >  	if (!ep->msix_cap)
> > >  		return -EINVAL;
> > >
> > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > >  	val = dw_pcie_readw_dbi(pci, reg);
> > >  	val &= ~PCI_MSIX_FLAGS_QSIZE;
> > >  	val |= interrupts;
> > > @@ -400,6 +415,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep
> > *ep, u8 func_no,
> > >  	unsigned int aligned_offset;
> > >  	u16 msg_ctrl, msg_data;
> > >  	u32 msg_addr_lower, msg_addr_upper, reg;
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >  	u64 msg_addr;
> > >  	bool has_upper;
> > >  	int ret;
> > > @@ -408,19 +424,19 @@ int dw_pcie_ep_raise_msi_irq(struct
> > dw_pcie_ep *ep, u8 func_no,
> > >  		return -EINVAL;
> > >
> > >  	/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */
> > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > >  	msg_ctrl = dw_pcie_readw_dbi(pci, reg);
> > >  	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
> > > -	reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
> > > +	reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_LO;
> > >  	msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > >  	if (has_upper) {
> > > -		reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
> > > +		reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_HI;
> > >  		msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
> > > -		reg = ep->msi_cap + PCI_MSI_DATA_64;
> > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_64;
> > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > >  	} else {
> > >  		msg_addr_upper = 0;
> > > -		reg = ep->msi_cap + PCI_MSI_DATA_32;
> > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_32;
> > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > >  	}
> > >  	aligned_offset = msg_addr_lower & (epc->mem->page_size - 1); @@
> > > -439,7 +455,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep,
> > > u8 func_no,  }
> > >
> > >  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> > > -			     u16 interrupt_num)
> > > +			      u16 interrupt_num)
> > >  {
> > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > >  	struct pci_epc *epc = ep->epc;
> > > @@ -447,16 +463,17 @@ int dw_pcie_ep_raise_msix_irq(struct
> > dw_pcie_ep *ep, u8 func_no,
> > >  	u32 bar_addr_upper, bar_addr_lower;
> > >  	u32 msg_addr_upper, msg_addr_lower;
> > >  	u32 reg, msg_data, vec_ctrl;
> > > +	u32 pf_base = func_no * epc->pf_offset;
> > >  	u64 tbl_addr, msg_addr, reg_u64;
> > >  	void __iomem *msix_tbl;
> > >  	int ret;
> > >
> > > -	reg = ep->msix_cap + PCI_MSIX_TABLE;
> > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_TABLE;
> > >  	tbl_offset = dw_pcie_readl_dbi(pci, reg);
> > >  	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
> > >  	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
> > >
> > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
> > > +	reg = PCI_BASE_ADDRESS_0 + pf_base + (4 * bir);
> > >  	bar_addr_upper = 0;
> > >  	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > >  	reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
> > @@
> > > -592,13 +609,17 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> > >  	ep->epc = epc;
> > >  	epc_set_drvdata(epc, ep);
> > >
> > > -	if (ep->ops->ep_init)
> > > -		ep->ops->ep_init(ep);
> > > -
> > >  	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
> > >  	if (ret < 0)
> > >  		epc->max_functions = 1;
> > >
> > > +	ret = of_property_read_u32(np, "pf-offset", &epc->pf_offset);
> > > +	if (ret < 0)
> > > +		epc->pf_offset = 0;
> > 
> > Bad things will likely happen if max_functions > 1 and pf-offset isn't set.
> > I think the driver should bail in this situation. It would be very easy for
> > someone to misconfigure this.
> Yes, you are right, but if the max-functions have defined in DTS, require the pf-offset
> must define in DTS, I am not sure the correct value of pf-offsetfor other platforms, 
> so I think the max-functions and pf-offset should not have the dependence.

Yes you're correct. I hadn't really thought about this beyond layerscape. It's
also possible that other hardware could support multiple PFs without relying on
an offset and perhaps employ some other mechanism to access different
functions. So whilst this property can be optional for the majority of dwc
controllers - it must be set and cannot be zero for layerscape.

Perhaps inside ls_pcie_ep_init, you can set max_functions to 1 if pf_offset is
0 and print a WARN to explain why? (Or ls_pcie_ep_init returns failure and
dw_pcie_ep_init checks it and bails).

The assumption is being made here that future dw controllers may also use
pf_offset (is this likely?) - otherwise why is this in pcie-designware-ep.c and
not pci-layerscape-ep.c and why is this value not just hard-coded for lp?


> even though I didn't define pf-offset when I defined max-functions, the pf-offset is 0, 
> the DWC ep driver can continue run the progress of INIT but not return, of course, 
> thus the PF1 will not work, I don't know which way is better.
> > 
> > 
> > > +
> > > +	if (ep->ops->ep_init)
> > > +		ep->ops->ep_init(ep);
> > > +
> > >  	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
> > >  				 ep->page_size);
> > >  	if (ret < 0) {
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > > b/drivers/pci/controller/dwc/pcie-designware.c
> > > index 7d25102..c99cee4 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > @@ -158,6 +158,43 @@ static void dw_pcie_writel_ob_unroll(struct
> > dw_pcie *pci, u32 index, u32 reg,
> > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > >
> > > +static void dw_pcie_prog_ep_outbound_atu_unroll(struct dw_pcie *pci, u8
> > func_no,
> > > +						int index, int type,
> > > +						u64 cpu_addr, u64 pci_addr,
> > > +						u32 size)
> > > +{
> > > +	u32 retries, val;
> > > +
> > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
> > > +				 lower_32_bits(cpu_addr));
> > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
> > > +				 upper_32_bits(cpu_addr));
> > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
> > > +				 lower_32_bits(cpu_addr + size - 1));
> > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
> > > +				 lower_32_bits(pci_addr));
> > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
> > > +				 upper_32_bits(pci_addr));
> > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> > > +				 type | PCIE_ATU_FUNC_NUM(func_no));
> > 
> > With the exception of this line, the rest of this function is identical to
> > dw_pcie_prog_outbound_atu_unroll.
> Yes, I can integrate the same code, but I think we'd better use the different outbound 
> window set function between RC and EP, because the RC don't need the func_num parameter.



> > 
> > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> > > +				 PCIE_ATU_ENABLE);
> > > +
> > > +	/*
> > > +	 * Make sure ATU enable takes effect before any subsequent config
> > > +	 * and I/O accesses.
> > > +	 */
> > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> > > +		val = dw_pcie_readl_ob_unroll(pci, index,
> > > +					      PCIE_ATU_UNR_REGION_CTRL2);
> > > +		if (val & PCIE_ATU_ENABLE)
> > > +			return;
> > > +
> > > +		mdelay(LINK_WAIT_IATU);
> > > +	}
> > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > +
> > >  static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int
> > index,
> > >  					     int type, u64 cpu_addr,
> > >  					     u64 pci_addr, u32 size)
> > > @@ -194,6 +231,51 @@ static void
> > dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> > >  	dev_err(pci->dev, "Outbound iATU is not being enabled\n");  }
> > >
> > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int
> > index,
> > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > +				  u32 size)
> > > +{
> > > +	u32 retries, val;
> > > +
> > > +	if (pci->ops->cpu_addr_fixup)
> > > +		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
> > > +
> > > +	if (pci->iatu_unroll_enabled) {
> > > +		dw_pcie_prog_ep_outbound_atu_unroll(pci, func_no, index, type,
> > > +						    cpu_addr, pci_addr, size);
> > > +		return;
> > > +	}
> > > +
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > > +			   PCIE_ATU_REGION_OUTBOUND | index);
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
> > > +			   lower_32_bits(cpu_addr));
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
> > > +			   upper_32_bits(cpu_addr));
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> > > +			   lower_32_bits(cpu_addr + size - 1));
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> > > +			   lower_32_bits(pci_addr));
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> > > +			   upper_32_bits(pci_addr));
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > 
> > The same here, this is identical to dw_pcie_prog_outbound_atu with the
> > exception of this line.
> > 
> > Is there a way you can avoid all of this duplicated code?
> As above, I can integrate the same code, but I keep to think the different outbound 
> Window set function should be used between RC and EP.

Or, is it possible to keep and use the existing functions, but use them
differently, e.g:


@@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
                return -EINVAL;
        }

-       dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
-                                 phys_addr, pci_addr, size);
+       dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM_FUNC(func_no),
+                                    phys_addr, pci_addr, size);

        set_bit(free_win, ep->ob_window_map);
        ep->outbound_addr[free_win] = phys_addr;


Supported with:

#define PCIE_ATU_TYPE_MEM               0x0
#define PCIE_ATU_TYPE_MEM_FUNC(func_no) (PCIE_ATU_TYPE_MEM | PCIE_ATU_FUNC_NUM(func_no))


This is just a suggestion, but I'm keen to avoid code duplication.

> > 
> > Thanks,
> > 
> > Andrew Murray
> > 
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
> > > +
> > > +	/*
> > > +	 * Make sure ATU enable takes effect before any subsequent config
> > > +	 * and I/O accesses.
> > > +	 */
> > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
> > > +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> > > +		if (val & PCIE_ATU_ENABLE)
> > > +			return;
> > > +
> > > +		mdelay(LINK_WAIT_IATU);
> > > +	}
> > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > +
> > >  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
> > >  			       u64 cpu_addr, u64 pci_addr, u32 size)  { @@ -252,8
> > +334,8
> > > @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index,
> > u32 reg,
> > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > >
> > > -static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> > > -					   int bar, u64 cpu_addr,
> > > +static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, u8
> > func_no,
> > > +					   int index, int bar, u64 cpu_addr,
> > >  					   enum dw_pcie_as_type as_type)  {
> > >  	int type;
> > > @@ -275,8 +357,10 @@ static int dw_pcie_prog_inbound_atu_unroll(struct
> > dw_pcie *pci, int index,
> > >  		return -EINVAL;
> > >  	}
> > >
> > > -	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> > type);
> > > +	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
> > type |
> > > +				 PCIE_ATU_FUNC_NUM(func_no));
> > >  	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
> > > +				 PCIE_ATU_FUNC_NUM_MATCH_EN |
> > >  				 PCIE_ATU_ENABLE |
> > >  				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > >
> > > @@ -297,14 +381,15 @@ static int
> > dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> > >  	return -EBUSY;
> > >  }
> > >
> > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > > -			     u64 cpu_addr, enum dw_pcie_as_type as_type)
> > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > +			     int bar, u64 cpu_addr,
> > > +			     enum dw_pcie_as_type as_type)
> > >  {
> > >  	int type;
> > >  	u32 retries, val;
> > >
> > >  	if (pci->iatu_unroll_enabled)
> > > -		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
> > > +		return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index, bar,
> > >  						       cpu_addr, as_type);
> > >
> > >  	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > PCIE_ATU_REGION_INBOUND |
> > > @@ -323,9 +408,11 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie
> > *pci, int index, int bar,
> > >  		return -EINVAL;
> > >  	}
> > >
> > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
> > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
> > > -			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
> > > +			   PCIE_ATU_FUNC_NUM_MATCH_EN |
> > > +			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > >
> > >  	/*
> > >  	 * Make sure ATU enable takes effect before any subsequent config
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> > > b/drivers/pci/controller/dwc/pcie-designware.h
> > > index ffed084..2b291e8 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > @@ -71,9 +71,11 @@
> > >  #define PCIE_ATU_TYPE_IO		0x2
> > >  #define PCIE_ATU_TYPE_CFG0		0x4
> > >  #define PCIE_ATU_TYPE_CFG1		0x5
> > > +#define PCIE_ATU_FUNC_NUM(pf)           (pf << 20)
> > >  #define PCIE_ATU_CR2			0x908
> > >  #define PCIE_ATU_ENABLE			BIT(31)
> > >  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> > > +#define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
> > >  #define PCIE_ATU_LOWER_BASE		0x90C
> > >  #define PCIE_ATU_UPPER_BASE		0x910
> > >  #define PCIE_ATU_LIMIT			0x914
> > > @@ -265,8 +267,12 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci);
> > > void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> > >  			       int type, u64 cpu_addr, u64 pci_addr,
> > >  			       u32 size);
> > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > > -			     u64 cpu_addr, enum dw_pcie_as_type as_type);
> > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int
> > index,
> > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > +				  u32 size);
> > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > > +			     int bar, u64 cpu_addr,
> > > +			     enum dw_pcie_as_type as_type);
> > >  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> > >  			 enum dw_pcie_region_type type);
> > >  void dw_pcie_setup(struct dw_pcie *pci); diff --git
> > > a/include/linux/pci-epc.h b/include/linux/pci-epc.h index
> > > f641bad..fc2feee 100644
> > > --- a/include/linux/pci-epc.h
> > > +++ b/include/linux/pci-epc.h
> > > @@ -96,6 +96,7 @@ struct pci_epc {
> > >  	const struct pci_epc_ops	*ops;
> > >  	struct pci_epc_mem		*mem;
> > >  	u8				max_functions;
> > > +	u32				pf_offset;

Also pf_offset is an implementation detail needed only by the driver to
calculate where the PF is - it doesn't seem right that we share this with the
EP controller framework (whereas max_functions is used as a bounds check
for func_no in the framework calls).

I'd suggest that pf_offset is moved to a dwc structure, perhaps dw_pcie_ep?

Thanks,

Andrew Murray

> > >  	struct config_group		*group;
> > >  	/* spinlock to protect against concurrent access of EP controller */
> > >  	spinlock_t			lock;
> > > --
> > > 2.9.5
> > >
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel@lists.infradead.org
> > > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists
> > > .infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&amp;data=02%
> > 7C0
> > >
> > 1%7Cxiaowei.bao%40nxp.com%7C0e39168f6f144db6840308d721742040%7
> > C686ea1d
> > >
> > 3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637014654998524452&amp;sd
> > ata=bP7eh
> > > cjlGXCMVFE2b4f12Q6fGV7lQ%2F5i9qIi9FoPlbI%3D&amp;reserved=0
Xiaowei Bao Aug. 16, 2019, 11 a.m. UTC | #4
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年8月16日 17:45
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> mark.rutland@arm.com; shawnguo@kernel.org; Leo Li
> <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian
> <minghuan.lian@nxp.com>; Roy Zang <roy.zang@nxp.com>;
> linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linuxppc-dev@lists.ozlabs.org; Z.q. Hou <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs support for
> DWC
> 
> On Fri, Aug 16, 2019 at 02:55:41AM +0000, Xiaowei Bao wrote:
> >
> >
> > > -----Original Message-----
> > > From: Andrew Murray <andrew.murray@arm.com>
> > > Sent: 2019年8月15日 19:32
> > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> > > bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > > shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> > > lorenzo.pieralisi@arm.com; arnd@arndb.de;
> > > gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>;
> > > Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>;
> > > linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> > > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > > linuxppc-dev@lists.ozlabs.org
> > > Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs
> > > support for DWC
> > >
> > > On Thu, Aug 15, 2019 at 04:37:07PM +0800, Xiaowei Bao wrote:
> > > > Add multiple PFs support for DWC, different PF have different
> > > > config space, we use pf-offset property which get from the DTS to
> > > > access the different pF config space.
> > >
> > > Thanks for the patch. I haven't seen a cover letter for this series,
> > > is there one missing?
> > Maybe I miss, I will add you to review next time, thanks a lot for your
> comments.
> > >
> > >
> > > >
> > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > ---
> > > >  drivers/pci/controller/dwc/pcie-designware-ep.c |  97
> > > +++++++++++++---------
> > > >  drivers/pci/controller/dwc/pcie-designware.c    | 105
> > > ++++++++++++++++++++++--
> > > >  drivers/pci/controller/dwc/pcie-designware.h    |  10 ++-
> > > >  include/linux/pci-epc.h                         |   1 +
> > > >  4 files changed, 164 insertions(+), 49 deletions(-)
> > > >
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > index 2bf5a35..75e2955 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > @@ -19,12 +19,14 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep
> *ep)
> > > >  	pci_epc_linkup(epc);
> > > >  }
> > > >
> > > > -static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum
> > > > pci_barno
> > > bar,
> > > > -				   int flags)
> > > > +static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
> > > > +				   enum pci_barno bar, int flags)
> > > >  {
> > > >  	u32 reg;
> > > > +	struct pci_epc *epc = pci->ep.epc;
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >
> > > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > +	reg = pf_base + PCI_BASE_ADDRESS_0 + (4 * bar);
> > >
> > > I think I'd rather see this arithmetic (and the one for determining
> > > pf_base) inside a macro or inline header function. This would make
> > > this code more readable and reduce the chances of an error by avoiding
> duplication of code.
> > >
> > > For example look at cdns_pcie_ep_fn_writeb and
> > > ROCKCHIP_PCIE_EP_FUNC_BASE for examples of other EP drivers that do
> > > this.
> > Agree, this looks fine, thanks a lot for your comments, I will use
> > this way to access the registers in next version patch.
> > >
> > >
> > > >  	dw_pcie_dbi_ro_wr_en(pci);
> > > >  	dw_pcie_writel_dbi2(pci, reg, 0x0);
> > > >  	dw_pcie_writel_dbi(pci, reg, 0x0); @@ -37,7 +39,12 @@ static
> > > > void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno
> > > > bar,
> > > >
> > > >  void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
> {
> > > > -	__dw_pcie_ep_reset_bar(pci, bar, 0);
> > > > +	u8 func_no, funcs;
> > > > +
> > > > +	funcs = pci->ep.epc->max_functions;
> > > > +
> > > > +	for (func_no = 0; func_no < funcs; func_no++)
> > > > +		__dw_pcie_ep_reset_bar(pci, func_no, bar, 0);
> > > >  }
> > > >
> > > >  static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8
> > > > cap_ptr, @@ -78,28 +85,29 @@ static int
> > > > dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,  {
> > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >
> > > >  	dw_pcie_dbi_ro_wr_en(pci);
> > > > -	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
> > > > -	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
> > > > -	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
> > > > -	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
> > > > -	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
> > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_VENDOR_ID,
> hdr->vendorid);
> > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_DEVICE_ID, hdr->deviceid);
> > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_REVISION_ID, hdr->revid);
> > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CLASS_PROG,
> hdr->progif_code);
> > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_CLASS_DEVICE,
> > > >  			   hdr->subclass_code | hdr->baseclass_code << 8);
> > > > -	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
> > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CACHE_LINE_SIZE,
> > > >  			   hdr->cache_line_size);
> > > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
> > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_VENDOR_ID,
> > > >  			   hdr->subsys_vendor_id);
> > > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
> > > > -	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
> > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_ID,
> > > hdr->subsys_id);
> > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_INTERRUPT_PIN,
> > > >  			   hdr->interrupt_pin);
> > > >  	dw_pcie_dbi_ro_wr_dis(pci);
> > > >
> > > >  	return 0;
> > > >  }
> > > >
> > > > -static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum
> > > pci_barno bar,
> > > > -				  dma_addr_t cpu_addr,
> > > > +static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8
> func_no,
> > > > +				  enum pci_barno bar, dma_addr_t cpu_addr,
> > > >  				  enum dw_pcie_as_type as_type)  {
> > > >  	int ret;
> > > > @@ -112,7 +120,7 @@ static int dw_pcie_ep_inbound_atu(struct
> > > dw_pcie_ep *ep, enum pci_barno bar,
> > > >  		return -EINVAL;
> > > >  	}
> > > >
> > > > -	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
> > > > +	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, bar,
> > > > +cpu_addr,
> > > >  				       as_type);
> > > >  	if (ret < 0) {
> > > >  		dev_err(pci->dev, "Failed to program IB window\n"); @@
> -125,7
> > > > +133,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep,
> > > enum pci_barno bar,
> > > >  	return 0;
> > > >  }
> > > >
> > > > -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep,
> > > > phys_addr_t phys_addr,
> > > > +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8
> func_no,
> > > > +				   phys_addr_t phys_addr,
> > > >  				   u64 pci_addr, size_t size)  {
> > > >  	u32 free_win;
> > > > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> > > dw_pcie_ep *ep, phys_addr_t phys_addr,
> > > >  		return -EINVAL;
> > > >  	}
> > > >
> > > > -	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> > > > -				  phys_addr, pci_addr, size);
> > > > +	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win,
> > > PCIE_ATU_TYPE_MEM,
> > > > +				     phys_addr, pci_addr, size);
> > > >
> > > >  	set_bit(free_win, ep->ob_window_map);
> > > >  	ep->outbound_addr[free_win] = phys_addr; @@ -154,7 +163,7
> @@
> > > static
> > > > void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
> > > >  	enum pci_barno bar = epf_bar->barno;
> > > >  	u32 atu_index = ep->bar_to_atu[bar];
> > > >
> > > > -	__dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags);
> > > > +	__dw_pcie_ep_reset_bar(pci, func_no, bar, epf_bar->flags);
> > > >
> > > >  	dw_pcie_disable_atu(pci, atu_index,
> DW_PCIE_REGION_INBOUND);
> > > >  	clear_bit(atu_index, ep->ib_window_map); @@ -170,14 +179,16
> @@
> > > > static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
> > > >  	size_t size = epf_bar->size;
> > > >  	int flags = epf_bar->flags;
> > > >  	enum dw_pcie_as_type as_type;
> > > > -	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > +	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar) + pf_base;
> > > >
> > > >  	if (!(flags & PCI_BASE_ADDRESS_SPACE))
> > > >  		as_type = DW_PCIE_AS_MEM;
> > > >  	else
> > > >  		as_type = DW_PCIE_AS_IO;
> > > >
> > > > -	ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr,
> as_type);
> > > > +	ret = dw_pcie_ep_inbound_atu(ep, func_no, bar,
> > > > +				     epf_bar->phys_addr, as_type);
> > > >  	if (ret)
> > > >  		return ret;
> > > >
> > > > @@ -235,7 +246,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc
> > > *epc, u8 func_no,
> > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > >
> > > > -	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> > > > +	ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr,
> > > > +size);
> > > >  	if (ret) {
> > > >  		dev_err(pci->dev, "Failed to enable address\n");
> > > >  		return ret;
> > > > @@ -248,12 +259,13 @@ static int dw_pcie_ep_get_msi(struct pci_epc
> > > > *epc, u8 func_no)  {
> > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >  	u32 val, reg;
> > > >
> > > >  	if (!ep->msi_cap)
> > > >  		return -EINVAL;
> > > >
> > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > >  	if (!(val & PCI_MSI_FLAGS_ENABLE))
> > > >  		return -EINVAL;
> > > > @@ -267,12 +279,13 @@ static int dw_pcie_ep_set_msi(struct pci_epc
> > > > *epc, u8 func_no, u8 interrupts)  {
> > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >  	u32 val, reg;
> > > >
> > > >  	if (!ep->msi_cap)
> > > >  		return -EINVAL;
> > > >
> > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > >  	val &= ~PCI_MSI_FLAGS_QMASK;
> > > >  	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; @@ -287,12
> > > > +300,13 @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8
> func_no)  {
> > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >  	u32 val, reg;
> > > >
> > > >  	if (!ep->msix_cap)
> > > >  		return -EINVAL;
> > > >
> > > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > >  	if (!(val & PCI_MSIX_FLAGS_ENABLE))
> > > >  		return -EINVAL;
> > > > @@ -306,12 +320,13 @@ static int dw_pcie_ep_set_msix(struct
> > > > pci_epc *epc, u8 func_no, u16 interrupts)  {
> > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >  	u32 val, reg;
> > > >
> > > >  	if (!ep->msix_cap)
> > > >  		return -EINVAL;
> > > >
> > > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > >  	val &= ~PCI_MSIX_FLAGS_QSIZE;
> > > >  	val |= interrupts;
> > > > @@ -400,6 +415,7 @@ int dw_pcie_ep_raise_msi_irq(struct
> dw_pcie_ep
> > > *ep, u8 func_no,
> > > >  	unsigned int aligned_offset;
> > > >  	u16 msg_ctrl, msg_data;
> > > >  	u32 msg_addr_lower, msg_addr_upper, reg;
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >  	u64 msg_addr;
> > > >  	bool has_upper;
> > > >  	int ret;
> > > > @@ -408,19 +424,19 @@ int dw_pcie_ep_raise_msi_irq(struct
> > > dw_pcie_ep *ep, u8 func_no,
> > > >  		return -EINVAL;
> > > >
> > > >  	/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1.
> */
> > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > >  	msg_ctrl = dw_pcie_readw_dbi(pci, reg);
> > > >  	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
> > > > -	reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
> > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_LO;
> > > >  	msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > > >  	if (has_upper) {
> > > > -		reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
> > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_HI;
> > > >  		msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
> > > > -		reg = ep->msi_cap + PCI_MSI_DATA_64;
> > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_64;
> > > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > > >  	} else {
> > > >  		msg_addr_upper = 0;
> > > > -		reg = ep->msi_cap + PCI_MSI_DATA_32;
> > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_32;
> > > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > > >  	}
> > > >  	aligned_offset = msg_addr_lower & (epc->mem->page_size - 1);
> @@
> > > > -439,7 +455,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep
> > > > *ep,
> > > > u8 func_no,  }
> > > >
> > > >  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> > > > -			     u16 interrupt_num)
> > > > +			      u16 interrupt_num)
> > > >  {
> > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > >  	struct pci_epc *epc = ep->epc;
> > > > @@ -447,16 +463,17 @@ int dw_pcie_ep_raise_msix_irq(struct
> > > dw_pcie_ep *ep, u8 func_no,
> > > >  	u32 bar_addr_upper, bar_addr_lower;
> > > >  	u32 msg_addr_upper, msg_addr_lower;
> > > >  	u32 reg, msg_data, vec_ctrl;
> > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > >  	u64 tbl_addr, msg_addr, reg_u64;
> > > >  	void __iomem *msix_tbl;
> > > >  	int ret;
> > > >
> > > > -	reg = ep->msix_cap + PCI_MSIX_TABLE;
> > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_TABLE;
> > > >  	tbl_offset = dw_pcie_readl_dbi(pci, reg);
> > > >  	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
> > > >  	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
> > > >
> > > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
> > > > +	reg = PCI_BASE_ADDRESS_0 + pf_base + (4 * bir);
> > > >  	bar_addr_upper = 0;
> > > >  	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > > >  	reg_u64 = (bar_addr_lower &
> PCI_BASE_ADDRESS_MEM_TYPE_MASK);
> > > @@
> > > > -592,13 +609,17 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> > > >  	ep->epc = epc;
> > > >  	epc_set_drvdata(epc, ep);
> > > >
> > > > -	if (ep->ops->ep_init)
> > > > -		ep->ops->ep_init(ep);
> > > > -
> > > >  	ret = of_property_read_u8(np, "max-functions",
> &epc->max_functions);
> > > >  	if (ret < 0)
> > > >  		epc->max_functions = 1;
> > > >
> > > > +	ret = of_property_read_u32(np, "pf-offset", &epc->pf_offset);
> > > > +	if (ret < 0)
> > > > +		epc->pf_offset = 0;
> > >
> > > Bad things will likely happen if max_functions > 1 and pf-offset isn't set.
> > > I think the driver should bail in this situation. It would be very
> > > easy for someone to misconfigure this.
> > Yes, you are right, but if the max-functions have defined in DTS,
> > require the pf-offset must define in DTS, I am not sure the correct
> > value of pf-offsetfor other platforms, so I think the max-functions and
> pf-offset should not have the dependence.
> 
> Yes you're correct. I hadn't really thought about this beyond layerscape. It's
> also possible that other hardware could support multiple PFs without relying
> on an offset and perhaps employ some other mechanism to access different
> functions. So whilst this property can be optional for the majority of dwc
> controllers - it must be set and cannot be zero for layerscape.
> 
> Perhaps inside ls_pcie_ep_init, you can set max_functions to 1 if pf_offset is
> 0 and print a WARN to explain why? (Or ls_pcie_ep_init returns failure and
> dw_pcie_ep_init checks it and bails).
> 
> The assumption is being made here that future dw controllers may also use
> pf_offset (is this likely?) - otherwise why is this in pcie-designware-ep.c and
> not pci-layerscape-ep.c and why is this value not just hard-coded for lp?

Thanks a lot for your detail comments, this give me a lot of help.
Yes, I agree your point, and I will seriously consider a best way to fix this potential issue.
Based on your experience, how do other platforms implement the multiple functions?
The DWC core difference the different PF by signal "client0_tlp_func_num[(PF_WD-1):0]"
> 
> 
> > even though I didn't define pf-offset when I defined max-functions,
> > the pf-offset is 0, the DWC ep driver can continue run the progress of
> > INIT but not return, of course, thus the PF1 will not work, I don't know which
> way is better.
Hi Andrew,
> > >
> > >
> > > > +
> > > > +	if (ep->ops->ep_init)
> > > > +		ep->ops->ep_init(ep);
> > > > +
> > > >  	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
> > > >  				 ep->page_size);
> > > >  	if (ret < 0) {
> > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > > > b/drivers/pci/controller/dwc/pcie-designware.c
> > > > index 7d25102..c99cee4 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > @@ -158,6 +158,43 @@ static void dw_pcie_writel_ob_unroll(struct
> > > dw_pcie *pci, u32 index, u32 reg,
> > > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > > >
> > > > +static void dw_pcie_prog_ep_outbound_atu_unroll(struct dw_pcie
> > > > +*pci, u8
> > > func_no,
> > > > +						int index, int type,
> > > > +						u64 cpu_addr, u64 pci_addr,
> > > > +						u32 size)
> > > > +{
> > > > +	u32 retries, val;
> > > > +
> > > > +	dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_LOWER_BASE,
> > > > +				 lower_32_bits(cpu_addr));
> > > > +	dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_UPPER_BASE,
> > > > +				 upper_32_bits(cpu_addr));
> > > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
> > > > +				 lower_32_bits(cpu_addr + size - 1));
> > > > +	dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_LOWER_TARGET,
> > > > +				 lower_32_bits(pci_addr));
> > > > +	dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_UPPER_TARGET,
> > > > +				 upper_32_bits(pci_addr));
> > > > +	dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_REGION_CTRL1,
> > > > +				 type | PCIE_ATU_FUNC_NUM(func_no));
> > >
> > > With the exception of this line, the rest of this function is
> > > identical to dw_pcie_prog_outbound_atu_unroll.
> > Yes, I can integrate the same code, but I think we'd better use the
> > different outbound window set function between RC and EP, because the RC
> don't need the func_num parameter.
> 
> 
> 
> > >
> > > > +	dw_pcie_writel_ob_unroll(pci, index,
> PCIE_ATU_UNR_REGION_CTRL2,
> > > > +				 PCIE_ATU_ENABLE);
> > > > +
> > > > +	/*
> > > > +	 * Make sure ATU enable takes effect before any subsequent config
> > > > +	 * and I/O accesses.
> > > > +	 */
> > > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++)
> {
> > > > +		val = dw_pcie_readl_ob_unroll(pci, index,
> > > > +					      PCIE_ATU_UNR_REGION_CTRL2);
> > > > +		if (val & PCIE_ATU_ENABLE)
> > > > +			return;
> > > > +
> > > > +		mdelay(LINK_WAIT_IATU);
> > > > +	}
> > > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > > +
> > > >  static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci,
> > > > int
> > > index,
> > > >  					     int type, u64 cpu_addr,
> > > >  					     u64 pci_addr, u32 size) @@ -194,6
> +231,51 @@ static
> > > > void
> > > dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> > > >  	dev_err(pci->dev, "Outbound iATU is not being enabled\n");  }
> > > >
> > > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8
> > > > +func_no, int
> > > index,
> > > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > > +				  u32 size)
> > > > +{
> > > > +	u32 retries, val;
> > > > +
> > > > +	if (pci->ops->cpu_addr_fixup)
> > > > +		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
> > > > +
> > > > +	if (pci->iatu_unroll_enabled) {
> > > > +		dw_pcie_prog_ep_outbound_atu_unroll(pci, func_no, index,
> type,
> > > > +						    cpu_addr, pci_addr, size);
> > > > +		return;
> > > > +	}
> > > > +
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > > > +			   PCIE_ATU_REGION_OUTBOUND | index);
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
> > > > +			   lower_32_bits(cpu_addr));
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
> > > > +			   upper_32_bits(cpu_addr));
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> > > > +			   lower_32_bits(cpu_addr + size - 1));
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> > > > +			   lower_32_bits(pci_addr));
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> > > > +			   upper_32_bits(pci_addr));
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > >
> > > The same here, this is identical to dw_pcie_prog_outbound_atu with
> > > the exception of this line.
> > >
> > > Is there a way you can avoid all of this duplicated code?
> > As above, I can integrate the same code, but I keep to think the
> > different outbound Window set function should be used between RC and EP.
> 
> Or, is it possible to keep and use the existing functions, but use them
> differently, e.g:
> 
> 
> @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> dw_pcie_ep *ep, phys_addr_t phys_addr,
>                 return -EINVAL;
>         }
> 
> -       dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> -                                 phys_addr, pci_addr, size);
> +       dw_pcie_prog_outbound_atu(pci, free_win,
> PCIE_ATU_TYPE_MEM_FUNC(func_no),
> +                                    phys_addr, pci_addr, size);
> 
>         set_bit(free_win, ep->ob_window_map);
>         ep->outbound_addr[free_win] = phys_addr;
> 
> 
> Supported with:
> 
> #define PCIE_ATU_TYPE_MEM               0x0
> #define PCIE_ATU_TYPE_MEM_FUNC(func_no) (PCIE_ATU_TYPE_MEM |
> PCIE_ATU_FUNC_NUM(func_no))
> 
> 
> This is just a suggestion, but I'm keen to avoid code duplication.
Thanks, I have think of a way as follow:

This is a good way, but I think PCIE_ATU_TYPE_MEM_FUNC(func_no) will give
Someone confused meaning, because PCIE_ATU_TYPE_MEM indicate the type of TLP,
and the location in the bit[0:3] of register CR1, but the PCIE_ATU_FUNC_NUM is bit[20:24],
I have another way:
@@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
dw_pcie_ep *ep, phys_addr_t phys_addr,
                 return -EINVAL;
        }
		
		dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
                                phys_addr, pci_addr, size);
+		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR1);
+		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val | PCIE_ATU_FUNC_NUM(func_no));
or 
+void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
+                                   int type, u64 cpu_addr, u64 pci_addr,
+                                   u32 size)
+{
+		dw_pcie_prog_outbound_atu(pci, index, type, cpu_addr, pci_addr, size);	
+		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR1);
+		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val | PCIE_ATU_FUNC_NUM(func_no));
+}

Which do you think is better of these three ways?

> 
> > >
> > > Thanks,
> > >
> > > Andrew Murray
> > >
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
> > > > +
> > > > +	/*
> > > > +	 * Make sure ATU enable takes effect before any subsequent config
> > > > +	 * and I/O accesses.
> > > > +	 */
> > > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++)
> {
> > > > +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> > > > +		if (val & PCIE_ATU_ENABLE)
> > > > +			return;
> > > > +
> > > > +		mdelay(LINK_WAIT_IATU);
> > > > +	}
> > > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > > +
> > > >  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int
> type,
> > > >  			       u64 cpu_addr, u64 pci_addr, u32 size)  { @@
> -252,8
> > > +334,8
> > > > @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32
> > > > index,
> > > u32 reg,
> > > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > > >
> > > > -static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int
> index,
> > > > -					   int bar, u64 cpu_addr,
> > > > +static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci,
> > > > +u8
> > > func_no,
> > > > +					   int index, int bar, u64 cpu_addr,
> > > >  					   enum dw_pcie_as_type as_type)  {
> > > >  	int type;
> > > > @@ -275,8 +357,10 @@ static int
> > > > dw_pcie_prog_inbound_atu_unroll(struct
> > > dw_pcie *pci, int index,
> > > >  		return -EINVAL;
> > > >  	}
> > > >
> > > > -	dw_pcie_writel_ib_unroll(pci, index,
> PCIE_ATU_UNR_REGION_CTRL1,
> > > type);
> > > > +	dw_pcie_writel_ib_unroll(pci, index,
> PCIE_ATU_UNR_REGION_CTRL1,
> > > type |
> > > > +				 PCIE_ATU_FUNC_NUM(func_no));
> > > >  	dw_pcie_writel_ib_unroll(pci, index,
> PCIE_ATU_UNR_REGION_CTRL2,
> > > > +				 PCIE_ATU_FUNC_NUM_MATCH_EN |
> > > >  				 PCIE_ATU_ENABLE |
> > > >  				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > >
> > > > @@ -297,14 +381,15 @@ static int
> > > dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> > > >  	return -EBUSY;
> > > >  }
> > > >
> > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > > > -			     u64 cpu_addr, enum dw_pcie_as_type as_type)
> > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
> > > > +			     int bar, u64 cpu_addr,
> > > > +			     enum dw_pcie_as_type as_type)
> > > >  {
> > > >  	int type;
> > > >  	u32 retries, val;
> > > >
> > > >  	if (pci->iatu_unroll_enabled)
> > > > -		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
> > > > +		return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index,
> > > > +bar,
> > > >  						       cpu_addr, as_type);
> > > >
> > > >  	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > > PCIE_ATU_REGION_INBOUND |
> > > > @@ -323,9 +408,11 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie
> > > *pci, int index, int bar,
> > > >  		return -EINVAL;
> > > >  	}
> > > >
> > > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
> > > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
> > > > -			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
> > > > +			   PCIE_ATU_FUNC_NUM_MATCH_EN |
> > > > +			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > >
> > > >  	/*
> > > >  	 * Make sure ATU enable takes effect before any subsequent
> > > > config diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> > > > b/drivers/pci/controller/dwc/pcie-designware.h
> > > > index ffed084..2b291e8 100644
> > > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > > @@ -71,9 +71,11 @@
> > > >  #define PCIE_ATU_TYPE_IO		0x2
> > > >  #define PCIE_ATU_TYPE_CFG0		0x4
> > > >  #define PCIE_ATU_TYPE_CFG1		0x5
> > > > +#define PCIE_ATU_FUNC_NUM(pf)           (pf << 20)
> > > >  #define PCIE_ATU_CR2			0x908
> > > >  #define PCIE_ATU_ENABLE			BIT(31)
> > > >  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> > > > +#define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
> > > >  #define PCIE_ATU_LOWER_BASE		0x90C
> > > >  #define PCIE_ATU_UPPER_BASE		0x910
> > > >  #define PCIE_ATU_LIMIT			0x914
> > > > @@ -265,8 +267,12 @@ int dw_pcie_wait_for_link(struct dw_pcie
> > > > *pci); void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> > > >  			       int type, u64 cpu_addr, u64 pci_addr,
> > > >  			       u32 size);
> > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > > > -			     u64 cpu_addr, enum dw_pcie_as_type as_type);
> > > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8
> > > > +func_no, int
> > > index,
> > > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > > +				  u32 size);
> > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
> > > > +			     int bar, u64 cpu_addr,
> > > > +			     enum dw_pcie_as_type as_type);
> > > >  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> > > >  			 enum dw_pcie_region_type type);  void
> dw_pcie_setup(struct
> > > > dw_pcie *pci); diff --git a/include/linux/pci-epc.h
> > > > b/include/linux/pci-epc.h index f641bad..fc2feee 100644
> > > > --- a/include/linux/pci-epc.h
> > > > +++ b/include/linux/pci-epc.h
> > > > @@ -96,6 +96,7 @@ struct pci_epc {
> > > >  	const struct pci_epc_ops	*ops;
> > > >  	struct pci_epc_mem		*mem;
> > > >  	u8				max_functions;
> > > > +	u32				pf_offset;
> 
> Also pf_offset is an implementation detail needed only by the driver to
> calculate where the PF is - it doesn't seem right that we share this with the EP
> controller framework (whereas max_functions is used as a bounds check for
> func_no in the framework calls).
> 
> I'd suggest that pf_offset is moved to a dwc structure, perhaps dw_pcie_ep?
I add the variable to this struct is consider that all PF is belong to a PCIe controller,
and the pci_epc indicate a PCIe controller, so I add this variable to this struct, what
do you think about this? I am not sure whether I should add this variable to dw_pcie_ep.
> 
> Thanks,
> 
> Andrew Murray
> 
> > > >  	struct config_group		*group;
> > > >  	/* spinlock to protect against concurrent access of EP controller */
> > > >  	spinlock_t			lock;
> > > > --
> > > > 2.9.5
> > > >
> > > >
> > > > _______________________________________________
> > > > linux-arm-kernel mailing list
> > > > linux-arm-kernel@lists.infradead.org
> > > > http://lists
> > > > .infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&amp;data=0
> 2
> > > > %
> > > 7C0
> > > >
> > >
> 1%7Cxiaowei.bao%40nxp.com%7C0e39168f6f144db6840308d721742040%7
> > > C686ea1d
> > > >
> > >
> 3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637014654998524452&amp;sd
> > > ata=bP7eh
> > > > cjlGXCMVFE2b4f12Q6fGV7lQ%2F5i9qIi9FoPlbI%3D&amp;reserved=0
Andrew Murray Aug. 16, 2019, 12:35 p.m. UTC | #5
On Fri, Aug 16, 2019 at 11:00:01AM +0000, Xiaowei Bao wrote:
> 
> 
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray@arm.com>
> > Sent: 2019年8月16日 17:45
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> > mark.rutland@arm.com; shawnguo@kernel.org; Leo Li
> > <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> > arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian
> > <minghuan.lian@nxp.com>; Roy Zang <roy.zang@nxp.com>;
> > linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > linuxppc-dev@lists.ozlabs.org; Z.q. Hou <zhiqiang.hou@nxp.com>
> > Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs support for
> > DWC
> > 
> > On Fri, Aug 16, 2019 at 02:55:41AM +0000, Xiaowei Bao wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Andrew Murray <andrew.murray@arm.com>
> > > > Sent: 2019年8月15日 19:32
> > > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> > > > bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > > > shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> > > > lorenzo.pieralisi@arm.com; arnd@arndb.de;
> > > > gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>;
> > > > Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>;
> > > > linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> > > > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > > > linuxppc-dev@lists.ozlabs.org
> > > > Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs
> > > > support for DWC
> > > >
> > > > On Thu, Aug 15, 2019 at 04:37:07PM +0800, Xiaowei Bao wrote:
> > > > > Add multiple PFs support for DWC, different PF have different
> > > > > config space, we use pf-offset property which get from the DTS to
> > > > > access the different pF config space.
> > > >
> > > > Thanks for the patch. I haven't seen a cover letter for this series,
> > > > is there one missing?
> > > Maybe I miss, I will add you to review next time, thanks a lot for your
> > comments.
> > > >
> > > >
> > > > >
> > > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > > ---
> > > > >  drivers/pci/controller/dwc/pcie-designware-ep.c |  97
> > > > +++++++++++++---------
> > > > >  drivers/pci/controller/dwc/pcie-designware.c    | 105
> > > > ++++++++++++++++++++++--
> > > > >  drivers/pci/controller/dwc/pcie-designware.h    |  10 ++-
> > > > >  include/linux/pci-epc.h                         |   1 +
> > > > >  4 files changed, 164 insertions(+), 49 deletions(-)
> > > > >
> > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > index 2bf5a35..75e2955 100644
> > > > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > @@ -19,12 +19,14 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep
> > *ep)
> > > > >  	pci_epc_linkup(epc);
> > > > >  }
> > > > >
> > > > > -static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum
> > > > > pci_barno
> > > > bar,
> > > > > -				   int flags)
> > > > > +static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
> > > > > +				   enum pci_barno bar, int flags)
> > > > >  {
> > > > >  	u32 reg;
> > > > > +	struct pci_epc *epc = pci->ep.epc;
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >
> > > > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > > +	reg = pf_base + PCI_BASE_ADDRESS_0 + (4 * bar);
> > > >
> > > > I think I'd rather see this arithmetic (and the one for determining
> > > > pf_base) inside a macro or inline header function. This would make
> > > > this code more readable and reduce the chances of an error by avoiding
> > duplication of code.
> > > >
> > > > For example look at cdns_pcie_ep_fn_writeb and
> > > > ROCKCHIP_PCIE_EP_FUNC_BASE for examples of other EP drivers that do
> > > > this.
> > > Agree, this looks fine, thanks a lot for your comments, I will use
> > > this way to access the registers in next version patch.
> > > >
> > > >
> > > > >  	dw_pcie_dbi_ro_wr_en(pci);
> > > > >  	dw_pcie_writel_dbi2(pci, reg, 0x0);
> > > > >  	dw_pcie_writel_dbi(pci, reg, 0x0); @@ -37,7 +39,12 @@ static
> > > > > void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno
> > > > > bar,
> > > > >
> > > > >  void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
> > {
> > > > > -	__dw_pcie_ep_reset_bar(pci, bar, 0);
> > > > > +	u8 func_no, funcs;
> > > > > +
> > > > > +	funcs = pci->ep.epc->max_functions;
> > > > > +
> > > > > +	for (func_no = 0; func_no < funcs; func_no++)
> > > > > +		__dw_pcie_ep_reset_bar(pci, func_no, bar, 0);
> > > > >  }
> > > > >
> > > > >  static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8
> > > > > cap_ptr, @@ -78,28 +85,29 @@ static int
> > > > > dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,  {
> > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >
> > > > >  	dw_pcie_dbi_ro_wr_en(pci);
> > > > > -	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
> > > > > -	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
> > > > > -	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
> > > > > -	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
> > > > > -	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
> > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_VENDOR_ID,
> > hdr->vendorid);
> > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_DEVICE_ID, hdr->deviceid);
> > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_REVISION_ID, hdr->revid);
> > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CLASS_PROG,
> > hdr->progif_code);
> > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_CLASS_DEVICE,
> > > > >  			   hdr->subclass_code | hdr->baseclass_code << 8);
> > > > > -	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
> > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CACHE_LINE_SIZE,
> > > > >  			   hdr->cache_line_size);
> > > > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
> > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_VENDOR_ID,
> > > > >  			   hdr->subsys_vendor_id);
> > > > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
> > > > > -	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
> > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_ID,
> > > > hdr->subsys_id);
> > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_INTERRUPT_PIN,
> > > > >  			   hdr->interrupt_pin);
> > > > >  	dw_pcie_dbi_ro_wr_dis(pci);
> > > > >
> > > > >  	return 0;
> > > > >  }
> > > > >
> > > > > -static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum
> > > > pci_barno bar,
> > > > > -				  dma_addr_t cpu_addr,
> > > > > +static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8
> > func_no,
> > > > > +				  enum pci_barno bar, dma_addr_t cpu_addr,
> > > > >  				  enum dw_pcie_as_type as_type)  {
> > > > >  	int ret;
> > > > > @@ -112,7 +120,7 @@ static int dw_pcie_ep_inbound_atu(struct
> > > > dw_pcie_ep *ep, enum pci_barno bar,
> > > > >  		return -EINVAL;
> > > > >  	}
> > > > >
> > > > > -	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
> > > > > +	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, bar,
> > > > > +cpu_addr,
> > > > >  				       as_type);
> > > > >  	if (ret < 0) {
> > > > >  		dev_err(pci->dev, "Failed to program IB window\n"); @@
> > -125,7
> > > > > +133,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep,
> > > > enum pci_barno bar,
> > > > >  	return 0;
> > > > >  }
> > > > >
> > > > > -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep,
> > > > > phys_addr_t phys_addr,
> > > > > +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8
> > func_no,
> > > > > +				   phys_addr_t phys_addr,
> > > > >  				   u64 pci_addr, size_t size)  {
> > > > >  	u32 free_win;
> > > > > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> > > > dw_pcie_ep *ep, phys_addr_t phys_addr,
> > > > >  		return -EINVAL;
> > > > >  	}
> > > > >
> > > > > -	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> > > > > -				  phys_addr, pci_addr, size);
> > > > > +	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win,
> > > > PCIE_ATU_TYPE_MEM,
> > > > > +				     phys_addr, pci_addr, size);
> > > > >
> > > > >  	set_bit(free_win, ep->ob_window_map);
> > > > >  	ep->outbound_addr[free_win] = phys_addr; @@ -154,7 +163,7
> > @@
> > > > static
> > > > > void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
> > > > >  	enum pci_barno bar = epf_bar->barno;
> > > > >  	u32 atu_index = ep->bar_to_atu[bar];
> > > > >
> > > > > -	__dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags);
> > > > > +	__dw_pcie_ep_reset_bar(pci, func_no, bar, epf_bar->flags);
> > > > >
> > > > >  	dw_pcie_disable_atu(pci, atu_index,
> > DW_PCIE_REGION_INBOUND);
> > > > >  	clear_bit(atu_index, ep->ib_window_map); @@ -170,14 +179,16
> > @@
> > > > > static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
> > > > >  	size_t size = epf_bar->size;
> > > > >  	int flags = epf_bar->flags;
> > > > >  	enum dw_pcie_as_type as_type;
> > > > > -	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > +	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar) + pf_base;
> > > > >
> > > > >  	if (!(flags & PCI_BASE_ADDRESS_SPACE))
> > > > >  		as_type = DW_PCIE_AS_MEM;
> > > > >  	else
> > > > >  		as_type = DW_PCIE_AS_IO;
> > > > >
> > > > > -	ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr,
> > as_type);
> > > > > +	ret = dw_pcie_ep_inbound_atu(ep, func_no, bar,
> > > > > +				     epf_bar->phys_addr, as_type);
> > > > >  	if (ret)
> > > > >  		return ret;
> > > > >
> > > > > @@ -235,7 +246,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc
> > > > *epc, u8 func_no,
> > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > >
> > > > > -	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> > > > > +	ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr,
> > > > > +size);
> > > > >  	if (ret) {
> > > > >  		dev_err(pci->dev, "Failed to enable address\n");
> > > > >  		return ret;
> > > > > @@ -248,12 +259,13 @@ static int dw_pcie_ep_get_msi(struct pci_epc
> > > > > *epc, u8 func_no)  {
> > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >  	u32 val, reg;
> > > > >
> > > > >  	if (!ep->msi_cap)
> > > > >  		return -EINVAL;
> > > > >
> > > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > >  	if (!(val & PCI_MSI_FLAGS_ENABLE))
> > > > >  		return -EINVAL;
> > > > > @@ -267,12 +279,13 @@ static int dw_pcie_ep_set_msi(struct pci_epc
> > > > > *epc, u8 func_no, u8 interrupts)  {
> > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >  	u32 val, reg;
> > > > >
> > > > >  	if (!ep->msi_cap)
> > > > >  		return -EINVAL;
> > > > >
> > > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > >  	val &= ~PCI_MSI_FLAGS_QMASK;
> > > > >  	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; @@ -287,12
> > > > > +300,13 @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8
> > func_no)  {
> > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >  	u32 val, reg;
> > > > >
> > > > >  	if (!ep->msix_cap)
> > > > >  		return -EINVAL;
> > > > >
> > > > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > >  	if (!(val & PCI_MSIX_FLAGS_ENABLE))
> > > > >  		return -EINVAL;
> > > > > @@ -306,12 +320,13 @@ static int dw_pcie_ep_set_msix(struct
> > > > > pci_epc *epc, u8 func_no, u16 interrupts)  {
> > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >  	u32 val, reg;
> > > > >
> > > > >  	if (!ep->msix_cap)
> > > > >  		return -EINVAL;
> > > > >
> > > > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > >  	val &= ~PCI_MSIX_FLAGS_QSIZE;
> > > > >  	val |= interrupts;
> > > > > @@ -400,6 +415,7 @@ int dw_pcie_ep_raise_msi_irq(struct
> > dw_pcie_ep
> > > > *ep, u8 func_no,
> > > > >  	unsigned int aligned_offset;
> > > > >  	u16 msg_ctrl, msg_data;
> > > > >  	u32 msg_addr_lower, msg_addr_upper, reg;
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >  	u64 msg_addr;
> > > > >  	bool has_upper;
> > > > >  	int ret;
> > > > > @@ -408,19 +424,19 @@ int dw_pcie_ep_raise_msi_irq(struct
> > > > dw_pcie_ep *ep, u8 func_no,
> > > > >  		return -EINVAL;
> > > > >
> > > > >  	/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1.
> > */
> > > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > > >  	msg_ctrl = dw_pcie_readw_dbi(pci, reg);
> > > > >  	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
> > > > > -	reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
> > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_LO;
> > > > >  	msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > > > >  	if (has_upper) {
> > > > > -		reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
> > > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_HI;
> > > > >  		msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
> > > > > -		reg = ep->msi_cap + PCI_MSI_DATA_64;
> > > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_64;
> > > > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > > > >  	} else {
> > > > >  		msg_addr_upper = 0;
> > > > > -		reg = ep->msi_cap + PCI_MSI_DATA_32;
> > > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_32;
> > > > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > > > >  	}
> > > > >  	aligned_offset = msg_addr_lower & (epc->mem->page_size - 1);
> > @@
> > > > > -439,7 +455,7 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep
> > > > > *ep,
> > > > > u8 func_no,  }
> > > > >
> > > > >  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> > > > > -			     u16 interrupt_num)
> > > > > +			      u16 interrupt_num)
> > > > >  {
> > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > >  	struct pci_epc *epc = ep->epc;
> > > > > @@ -447,16 +463,17 @@ int dw_pcie_ep_raise_msix_irq(struct
> > > > dw_pcie_ep *ep, u8 func_no,
> > > > >  	u32 bar_addr_upper, bar_addr_lower;
> > > > >  	u32 msg_addr_upper, msg_addr_lower;
> > > > >  	u32 reg, msg_data, vec_ctrl;
> > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > >  	u64 tbl_addr, msg_addr, reg_u64;
> > > > >  	void __iomem *msix_tbl;
> > > > >  	int ret;
> > > > >
> > > > > -	reg = ep->msix_cap + PCI_MSIX_TABLE;
> > > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_TABLE;
> > > > >  	tbl_offset = dw_pcie_readl_dbi(pci, reg);
> > > > >  	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
> > > > >  	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
> > > > >
> > > > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
> > > > > +	reg = PCI_BASE_ADDRESS_0 + pf_base + (4 * bir);
> > > > >  	bar_addr_upper = 0;
> > > > >  	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > > > >  	reg_u64 = (bar_addr_lower &
> > PCI_BASE_ADDRESS_MEM_TYPE_MASK);
> > > > @@
> > > > > -592,13 +609,17 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> > > > >  	ep->epc = epc;
> > > > >  	epc_set_drvdata(epc, ep);
> > > > >
> > > > > -	if (ep->ops->ep_init)
> > > > > -		ep->ops->ep_init(ep);
> > > > > -
> > > > >  	ret = of_property_read_u8(np, "max-functions",
> > &epc->max_functions);
> > > > >  	if (ret < 0)
> > > > >  		epc->max_functions = 1;
> > > > >
> > > > > +	ret = of_property_read_u32(np, "pf-offset", &epc->pf_offset);
> > > > > +	if (ret < 0)
> > > > > +		epc->pf_offset = 0;
> > > >
> > > > Bad things will likely happen if max_functions > 1 and pf-offset isn't set.
> > > > I think the driver should bail in this situation. It would be very
> > > > easy for someone to misconfigure this.
> > > Yes, you are right, but if the max-functions have defined in DTS,
> > > require the pf-offset must define in DTS, I am not sure the correct
> > > value of pf-offsetfor other platforms, so I think the max-functions and
> > pf-offset should not have the dependence.
> > 
> > Yes you're correct. I hadn't really thought about this beyond layerscape. It's
> > also possible that other hardware could support multiple PFs without relying
> > on an offset and perhaps employ some other mechanism to access different
> > functions. So whilst this property can be optional for the majority of dwc
> > controllers - it must be set and cannot be zero for layerscape.
> > 
> > Perhaps inside ls_pcie_ep_init, you can set max_functions to 1 if pf_offset is
> > 0 and print a WARN to explain why? (Or ls_pcie_ep_init returns failure and
> > dw_pcie_ep_init checks it and bails).
> > 
> > The assumption is being made here that future dw controllers may also use
> > pf_offset (is this likely?) - otherwise why is this in pcie-designware-ep.c and
> > not pci-layerscape-ep.c and why is this value not just hard-coded for lp?
> 
> Thanks a lot for your detail comments, this give me a lot of help.
> Yes, I agree your point, and I will seriously consider a best way to fix this potential issue.
> Based on your experience, how do other platforms implement the multiple functions?
> The DWC core difference the different PF by signal "client0_tlp_func_num[(PF_WD-1):0]"

I don't know, though looking at the kernel drivers suggests that the
existing EP controllers have a large address space which contains multiple
PFs. They are accessed via macros (ROCKCHIP_PCIE_EP_FUNC_BASE(fn), 
CDNS_PCIE_EP_FUNC_BASE(fn)). It would be possible, but probably not desirable
to have a smaller address space (window) and a register that selects which
function the window refers to. This is why I'm slight nervous of assuming
that a pf-offset will cover all future dw drivers - I may be wrong.

> > 
> > 
> > > even though I didn't define pf-offset when I defined max-functions,
> > > the pf-offset is 0, the DWC ep driver can continue run the progress of
> > > INIT but not return, of course, thus the PF1 will not work, I don't know which
> > way is better.
> Hi Andrew,
> > > >
> > > >
> > > > > +
> > > > > +	if (ep->ops->ep_init)
> > > > > +		ep->ops->ep_init(ep);
> > > > > +
> > > > >  	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
> > > > >  				 ep->page_size);
> > > > >  	if (ret < 0) {
> > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > > > > b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > index 7d25102..c99cee4 100644
> > > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > @@ -158,6 +158,43 @@ static void dw_pcie_writel_ob_unroll(struct
> > > > dw_pcie *pci, u32 index, u32 reg,
> > > > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > > > >
> > > > > +static void dw_pcie_prog_ep_outbound_atu_unroll(struct dw_pcie
> > > > > +*pci, u8
> > > > func_no,
> > > > > +						int index, int type,
> > > > > +						u64 cpu_addr, u64 pci_addr,
> > > > > +						u32 size)
> > > > > +{
> > > > > +	u32 retries, val;
> > > > > +
> > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > PCIE_ATU_UNR_LOWER_BASE,
> > > > > +				 lower_32_bits(cpu_addr));
> > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > PCIE_ATU_UNR_UPPER_BASE,
> > > > > +				 upper_32_bits(cpu_addr));
> > > > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
> > > > > +				 lower_32_bits(cpu_addr + size - 1));
> > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > PCIE_ATU_UNR_LOWER_TARGET,
> > > > > +				 lower_32_bits(pci_addr));
> > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > PCIE_ATU_UNR_UPPER_TARGET,
> > > > > +				 upper_32_bits(pci_addr));
> > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > PCIE_ATU_UNR_REGION_CTRL1,
> > > > > +				 type | PCIE_ATU_FUNC_NUM(func_no));
> > > >
> > > > With the exception of this line, the rest of this function is
> > > > identical to dw_pcie_prog_outbound_atu_unroll.
> > > Yes, I can integrate the same code, but I think we'd better use the
> > > different outbound window set function between RC and EP, because the RC
> > don't need the func_num parameter.
> > 
> > 
> > 
> > > >
> > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > PCIE_ATU_UNR_REGION_CTRL2,
> > > > > +				 PCIE_ATU_ENABLE);
> > > > > +
> > > > > +	/*
> > > > > +	 * Make sure ATU enable takes effect before any subsequent config
> > > > > +	 * and I/O accesses.
> > > > > +	 */
> > > > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++)
> > {
> > > > > +		val = dw_pcie_readl_ob_unroll(pci, index,
> > > > > +					      PCIE_ATU_UNR_REGION_CTRL2);
> > > > > +		if (val & PCIE_ATU_ENABLE)
> > > > > +			return;
> > > > > +
> > > > > +		mdelay(LINK_WAIT_IATU);
> > > > > +	}
> > > > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > > > +
> > > > >  static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci,
> > > > > int
> > > > index,
> > > > >  					     int type, u64 cpu_addr,
> > > > >  					     u64 pci_addr, u32 size) @@ -194,6
> > +231,51 @@ static
> > > > > void
> > > > dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> > > > >  	dev_err(pci->dev, "Outbound iATU is not being enabled\n");  }
> > > > >
> > > > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8
> > > > > +func_no, int
> > > > index,
> > > > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > > > +				  u32 size)
> > > > > +{
> > > > > +	u32 retries, val;
> > > > > +
> > > > > +	if (pci->ops->cpu_addr_fixup)
> > > > > +		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
> > > > > +
> > > > > +	if (pci->iatu_unroll_enabled) {
> > > > > +		dw_pcie_prog_ep_outbound_atu_unroll(pci, func_no, index,
> > type,
> > > > > +						    cpu_addr, pci_addr, size);
> > > > > +		return;
> > > > > +	}
> > > > > +
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > > > > +			   PCIE_ATU_REGION_OUTBOUND | index);
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
> > > > > +			   lower_32_bits(cpu_addr));
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
> > > > > +			   upper_32_bits(cpu_addr));
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> > > > > +			   lower_32_bits(cpu_addr + size - 1));
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> > > > > +			   lower_32_bits(pci_addr));
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> > > > > +			   upper_32_bits(pci_addr));
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > > >
> > > > The same here, this is identical to dw_pcie_prog_outbound_atu with
> > > > the exception of this line.
> > > >
> > > > Is there a way you can avoid all of this duplicated code?
> > > As above, I can integrate the same code, but I keep to think the
> > > different outbound Window set function should be used between RC and EP.
> > 
> > Or, is it possible to keep and use the existing functions, but use them
> > differently, e.g:
> > 
> > 
> > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> > dw_pcie_ep *ep, phys_addr_t phys_addr,
> >                 return -EINVAL;
> >         }
> > 
> > -       dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> > -                                 phys_addr, pci_addr, size);
> > +       dw_pcie_prog_outbound_atu(pci, free_win,
> > PCIE_ATU_TYPE_MEM_FUNC(func_no),
> > +                                    phys_addr, pci_addr, size);
> > 
> >         set_bit(free_win, ep->ob_window_map);
> >         ep->outbound_addr[free_win] = phys_addr;
> > 
> > 
> > Supported with:
> > 
> > #define PCIE_ATU_TYPE_MEM               0x0
> > #define PCIE_ATU_TYPE_MEM_FUNC(func_no) (PCIE_ATU_TYPE_MEM |
> > PCIE_ATU_FUNC_NUM(func_no))
> > 
> > 
> > This is just a suggestion, but I'm keen to avoid code duplication.
> Thanks, I have think of a way as follow:
> 
> This is a good way, but I think PCIE_ATU_TYPE_MEM_FUNC(func_no) will give
> Someone confused meaning, because PCIE_ATU_TYPE_MEM indicate the type of TLP,
> and the location in the bit[0:3] of register CR1, but the PCIE_ATU_FUNC_NUM is bit[20:24],
> I have another way:
> @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> dw_pcie_ep *ep, phys_addr_t phys_addr,
>                  return -EINVAL;
>         }
> 		
> 		dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
>                                 phys_addr, pci_addr, size);
> +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR1);
> +		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val | PCIE_ATU_FUNC_NUM(func_no));
> or 
> +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> +                                   int type, u64 cpu_addr, u64 pci_addr,
> +                                   u32 size)
> +{
> +		dw_pcie_prog_outbound_atu(pci, index, type, cpu_addr, pci_addr, size);	
> +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR1);
> +		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val | PCIE_ATU_FUNC_NUM(func_no));
> +}
> 
> Which do you think is better of these three ways?

Building upon your idea, how about:

 
 @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
 dw_pcie_ep *ep, phys_addr_t phys_addr,
                 return -EINVAL;
         }
 
 -       dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
 -                                 phys_addr, pci_addr, size);
 +       dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM
 +                                    phys_addr, pci_addr, size);
 
         set_bit(free_win, ep->ob_window_map);
         ep->outbound_addr[free_win] = phys_addr;
 

 +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
 +                                   int type, u64 cpu_addr, u64 pci_addr,
 +                                   u32 size)
 +{
 +		__dw_pcie_prog_outbound_atu(pci, func_no, index, type, cpu_addr, pci_addr, size);	
 +}
 +
 +void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
 +                                   int type, u64 cpu_addr, u64 pci_addr,
 +                                   u32 size)
 +{
 +		__dw_pcie_prog_outbound_atu(pci, 0, index, type, cpu_addr, pci_addr, size);	
 +}

In other words dw_pcie_prog_outbound_atu is updated (and renamed) to always
take a func_no and for host controllers this is always set to zero. Or you
could follow the approach taken in the cadence drivers for their implementation
of cdns_pcie_set_outbound_region - this always takes a func_no and is used
by host controller and endpoint drivers (except they don't have the helper
wrapper functions above thus exposing fn=0 to host controllers).

> > 
> > > >
> > > > Thanks,
> > > >
> > > > Andrew Murray
> > > >
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
> > > > > +
> > > > > +	/*
> > > > > +	 * Make sure ATU enable takes effect before any subsequent config
> > > > > +	 * and I/O accesses.
> > > > > +	 */
> > > > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++)
> > {
> > > > > +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> > > > > +		if (val & PCIE_ATU_ENABLE)
> > > > > +			return;
> > > > > +
> > > > > +		mdelay(LINK_WAIT_IATU);
> > > > > +	}
> > > > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > > > +
> > > > >  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int
> > type,
> > > > >  			       u64 cpu_addr, u64 pci_addr, u32 size)  { @@
> > -252,8
> > > > +334,8
> > > > > @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32
> > > > > index,
> > > > u32 reg,
> > > > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > > > >
> > > > > -static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int
> > index,
> > > > > -					   int bar, u64 cpu_addr,
> > > > > +static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci,
> > > > > +u8
> > > > func_no,
> > > > > +					   int index, int bar, u64 cpu_addr,
> > > > >  					   enum dw_pcie_as_type as_type)  {
> > > > >  	int type;
> > > > > @@ -275,8 +357,10 @@ static int
> > > > > dw_pcie_prog_inbound_atu_unroll(struct
> > > > dw_pcie *pci, int index,
> > > > >  		return -EINVAL;
> > > > >  	}
> > > > >
> > > > > -	dw_pcie_writel_ib_unroll(pci, index,
> > PCIE_ATU_UNR_REGION_CTRL1,
> > > > type);
> > > > > +	dw_pcie_writel_ib_unroll(pci, index,
> > PCIE_ATU_UNR_REGION_CTRL1,
> > > > type |
> > > > > +				 PCIE_ATU_FUNC_NUM(func_no));
> > > > >  	dw_pcie_writel_ib_unroll(pci, index,
> > PCIE_ATU_UNR_REGION_CTRL2,
> > > > > +				 PCIE_ATU_FUNC_NUM_MATCH_EN |
> > > > >  				 PCIE_ATU_ENABLE |
> > > > >  				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > > >
> > > > > @@ -297,14 +381,15 @@ static int
> > > > dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> > > > >  	return -EBUSY;
> > > > >  }
> > > > >
> > > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > > > > -			     u64 cpu_addr, enum dw_pcie_as_type as_type)
> > > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int
> > index,
> > > > > +			     int bar, u64 cpu_addr,
> > > > > +			     enum dw_pcie_as_type as_type)
> > > > >  {
> > > > >  	int type;
> > > > >  	u32 retries, val;
> > > > >
> > > > >  	if (pci->iatu_unroll_enabled)
> > > > > -		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
> > > > > +		return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index,
> > > > > +bar,
> > > > >  						       cpu_addr, as_type);
> > > > >
> > > > >  	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > > > PCIE_ATU_REGION_INBOUND |
> > > > > @@ -323,9 +408,11 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie
> > > > *pci, int index, int bar,
> > > > >  		return -EINVAL;
> > > > >  	}
> > > > >
> > > > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
> > > > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
> > > > > -			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
> > > > > +			   PCIE_ATU_FUNC_NUM_MATCH_EN |
> > > > > +			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > > >
> > > > >  	/*
> > > > >  	 * Make sure ATU enable takes effect before any subsequent
> > > > > config diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> > > > > b/drivers/pci/controller/dwc/pcie-designware.h
> > > > > index ffed084..2b291e8 100644
> > > > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > > > @@ -71,9 +71,11 @@
> > > > >  #define PCIE_ATU_TYPE_IO		0x2
> > > > >  #define PCIE_ATU_TYPE_CFG0		0x4
> > > > >  #define PCIE_ATU_TYPE_CFG1		0x5
> > > > > +#define PCIE_ATU_FUNC_NUM(pf)           (pf << 20)
> > > > >  #define PCIE_ATU_CR2			0x908
> > > > >  #define PCIE_ATU_ENABLE			BIT(31)
> > > > >  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> > > > > +#define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
> > > > >  #define PCIE_ATU_LOWER_BASE		0x90C
> > > > >  #define PCIE_ATU_UPPER_BASE		0x910
> > > > >  #define PCIE_ATU_LIMIT			0x914
> > > > > @@ -265,8 +267,12 @@ int dw_pcie_wait_for_link(struct dw_pcie
> > > > > *pci); void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
> > > > >  			       int type, u64 cpu_addr, u64 pci_addr,
> > > > >  			       u32 size);
> > > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
> > > > > -			     u64 cpu_addr, enum dw_pcie_as_type as_type);
> > > > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8
> > > > > +func_no, int
> > > > index,
> > > > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > > > +				  u32 size);
> > > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int
> > index,
> > > > > +			     int bar, u64 cpu_addr,
> > > > > +			     enum dw_pcie_as_type as_type);
> > > > >  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> > > > >  			 enum dw_pcie_region_type type);  void
> > dw_pcie_setup(struct
> > > > > dw_pcie *pci); diff --git a/include/linux/pci-epc.h
> > > > > b/include/linux/pci-epc.h index f641bad..fc2feee 100644
> > > > > --- a/include/linux/pci-epc.h
> > > > > +++ b/include/linux/pci-epc.h
> > > > > @@ -96,6 +96,7 @@ struct pci_epc {
> > > > >  	const struct pci_epc_ops	*ops;
> > > > >  	struct pci_epc_mem		*mem;
> > > > >  	u8				max_functions;
> > > > > +	u32				pf_offset;
> > 
> > Also pf_offset is an implementation detail needed only by the driver to
> > calculate where the PF is - it doesn't seem right that we share this with the EP
> > controller framework (whereas max_functions is used as a bounds check for
> > func_no in the framework calls).
> > 
> > I'd suggest that pf_offset is moved to a dwc structure, perhaps dw_pcie_ep?
> I add the variable to this struct is consider that all PF is belong to a PCIe controller,
> and the pci_epc indicate a PCIe controller, so I add this variable to this struct, what
> do you think about this? I am not sure whether I should add this variable to dw_pcie_ep.

The EPC framework won't use the pf_offset and doesn't need it. It abstracts
the complexity of writing to the config address space (and similar) through
the pci_epc_ops. I'd suggest that the EPC framework (and pci_epc struct) only
needs to contain what *it* needs. Especially given that not all ep drivers
have a pf_offset or similar.

I understand the logic that pci_epc represents a EP controller, but I think
you should consider that it actually represents a *generic* EP controller in
the context of a framework which solely serves the purpose of connecting
controllers with functions. Whereas the dw_pcie_ep represents a specific type
of controller (DW) - as the pf_offset is (so far) relating to only DW
controllers (and as confirmed by the DT mapping) then it makes sense to not
move pf_offset from the specialised specific controller to the generic
controller. (Or at least this is how I rationalise it, though the EPC
framework is something quite unfamiliar to me).

Thanks,

Andrew Murray

> > 
> > Thanks,
> > 
> > Andrew Murray
> > 
> > > > >  	struct config_group		*group;
> > > > >  	/* spinlock to protect against concurrent access of EP controller */
> > > > >  	spinlock_t			lock;
> > > > > --
> > > > > 2.9.5
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > linux-arm-kernel mailing list
> > > > > linux-arm-kernel@lists.infradead.org
> > > > > http://lists
> > > > > .infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&amp;data=0
> > 2
> > > > > %
> > > > 7C0
> > > > >
> > > >
> > 1%7Cxiaowei.bao%40nxp.com%7C0e39168f6f144db6840308d721742040%7
> > > > C686ea1d
> > > > >
> > > >
> > 3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637014654998524452&amp;sd
> > > > ata=bP7eh
> > > > > cjlGXCMVFE2b4f12Q6fGV7lQ%2F5i9qIi9FoPlbI%3D&amp;reserved=0
Xiaowei Bao Aug. 16, 2019, 3:11 p.m. UTC | #6
> -----Original Message-----
> From: Andrew Murray <andrew.murray@arm.com>
> Sent: 2019年8月16日 20:35
> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> mark.rutland@arm.com; shawnguo@kernel.org; Leo Li
> <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian
> <minghuan.lian@nxp.com>; Roy Zang <roy.zang@nxp.com>;
> linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linuxppc-dev@lists.ozlabs.org; Z.q. Hou <zhiqiang.hou@nxp.com>
> Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs support for
> DWC
> 
> On Fri, Aug 16, 2019 at 11:00:01AM +0000, Xiaowei Bao wrote:
> >
> >
> > > -----Original Message-----
> > > From: Andrew Murray <andrew.murray@arm.com>
> > > Sent: 2019年8月16日 17:45
> > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> > > mark.rutland@arm.com; shawnguo@kernel.org; Leo Li
> > > <leoyang.li@nxp.com>; kishon@ti.com; lorenzo.pieralisi@arm.com;
> > > arnd@arndb.de; gregkh@linuxfoundation.org; M.h. Lian
> > > <minghuan.lian@nxp.com>; Roy Zang <roy.zang@nxp.com>;
> > > linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> > > linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> > > linuxppc-dev@lists.ozlabs.org; Z.q. Hou <zhiqiang.hou@nxp.com>
> > > Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs
> > > support for DWC
> > >
> > > On Fri, Aug 16, 2019 at 02:55:41AM +0000, Xiaowei Bao wrote:
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: Andrew Murray <andrew.murray@arm.com>
> > > > > Sent: 2019年8月15日 19:32
> > > > > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > > Cc: jingoohan1@gmail.com; gustavo.pimentel@synopsys.com;
> > > > > bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > > > > shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> > > > > lorenzo.pieralisi@arm.com; arnd@arndb.de;
> > > > > gregkh@linuxfoundation.org; M.h. Lian <minghuan.lian@nxp.com>;
> > > > > Mingkai Hu <mingkai.hu@nxp.com>; Roy Zang <roy.zang@nxp.com>;
> > > > > linux-pci@vger.kernel.org; devicetree@vger.kernel.org;
> > > > > linux-kernel@vger.kernel.org;
> > > > > linux-arm-kernel@lists.infradead.org;
> > > > > linuxppc-dev@lists.ozlabs.org
> > > > > Subject: Re: [PATCH 01/10] PCI: designware-ep: Add multiple PFs
> > > > > support for DWC
> > > > >
> > > > > On Thu, Aug 15, 2019 at 04:37:07PM +0800, Xiaowei Bao wrote:
> > > > > > Add multiple PFs support for DWC, different PF have different
> > > > > > config space, we use pf-offset property which get from the DTS
> > > > > > to access the different pF config space.
> > > > >
> > > > > Thanks for the patch. I haven't seen a cover letter for this
> > > > > series, is there one missing?
> > > > Maybe I miss, I will add you to review next time, thanks a lot for
> > > > your
> > > comments.
> > > > >
> > > > >
> > > > > >
> > > > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > > > > ---
> > > > > >  drivers/pci/controller/dwc/pcie-designware-ep.c |  97
> > > > > +++++++++++++---------
> > > > > >  drivers/pci/controller/dwc/pcie-designware.c    | 105
> > > > > ++++++++++++++++++++++--
> > > > > >  drivers/pci/controller/dwc/pcie-designware.h    |  10 ++-
> > > > > >  include/linux/pci-epc.h                         |   1 +
> > > > > >  4 files changed, 164 insertions(+), 49 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > > b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > > index 2bf5a35..75e2955 100644
> > > > > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > > > > @@ -19,12 +19,14 @@ void dw_pcie_ep_linkup(struct dw_pcie_ep
> > > *ep)
> > > > > >  	pci_epc_linkup(epc);
> > > > > >  }
> > > > > >
> > > > > > -static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum
> > > > > > pci_barno
> > > > > bar,
> > > > > > -				   int flags)
> > > > > > +static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8
> func_no,
> > > > > > +				   enum pci_barno bar, int flags)
> > > > > >  {
> > > > > >  	u32 reg;
> > > > > > +	struct pci_epc *epc = pci->ep.epc;
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >
> > > > > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > > > +	reg = pf_base + PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > >
> > > > > I think I'd rather see this arithmetic (and the one for
> > > > > determining
> > > > > pf_base) inside a macro or inline header function. This would
> > > > > make this code more readable and reduce the chances of an error
> > > > > by avoiding
> > > duplication of code.
> > > > >
> > > > > For example look at cdns_pcie_ep_fn_writeb and
> > > > > ROCKCHIP_PCIE_EP_FUNC_BASE for examples of other EP drivers that
> > > > > do this.
> > > > Agree, this looks fine, thanks a lot for your comments, I will use
> > > > this way to access the registers in next version patch.
> > > > >
> > > > >
> > > > > >  	dw_pcie_dbi_ro_wr_en(pci);
> > > > > >  	dw_pcie_writel_dbi2(pci, reg, 0x0);
> > > > > >  	dw_pcie_writel_dbi(pci, reg, 0x0); @@ -37,7 +39,12 @@ static
> > > > > > void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum
> > > > > > pci_barno bar,
> > > > > >
> > > > > >  void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno
> > > > > > bar)
> > > {
> > > > > > -	__dw_pcie_ep_reset_bar(pci, bar, 0);
> > > > > > +	u8 func_no, funcs;
> > > > > > +
> > > > > > +	funcs = pci->ep.epc->max_functions;
> > > > > > +
> > > > > > +	for (func_no = 0; func_no < funcs; func_no++)
> > > > > > +		__dw_pcie_ep_reset_bar(pci, func_no, bar, 0);
> > > > > >  }
> > > > > >
> > > > > >  static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8
> > > > > > cap_ptr, @@ -78,28 +85,29 @@ static int
> > > > > > dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,  {
> > > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >
> > > > > >  	dw_pcie_dbi_ro_wr_en(pci);
> > > > > > -	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
> > > > > > -	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
> > > > > > -	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
> > > > > > -	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
> > > > > > -	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
> > > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_VENDOR_ID,
> > > hdr->vendorid);
> > > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_DEVICE_ID,
> hdr->deviceid);
> > > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_REVISION_ID,
> hdr->revid);
> > > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CLASS_PROG,
> > > hdr->progif_code);
> > > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_CLASS_DEVICE,
> > > > > >  			   hdr->subclass_code | hdr->baseclass_code << 8);
> > > > > > -	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
> > > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_CACHE_LINE_SIZE,
> > > > > >  			   hdr->cache_line_size);
> > > > > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
> > > > > > +	dw_pcie_writew_dbi(pci, pf_base +
> PCI_SUBSYSTEM_VENDOR_ID,
> > > > > >  			   hdr->subsys_vendor_id);
> > > > > > -	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID,
> hdr->subsys_id);
> > > > > > -	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
> > > > > > +	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_ID,
> > > > > hdr->subsys_id);
> > > > > > +	dw_pcie_writeb_dbi(pci, pf_base + PCI_INTERRUPT_PIN,
> > > > > >  			   hdr->interrupt_pin);
> > > > > >  	dw_pcie_dbi_ro_wr_dis(pci);
> > > > > >
> > > > > >  	return 0;
> > > > > >  }
> > > > > >
> > > > > > -static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum
> > > > > pci_barno bar,
> > > > > > -				  dma_addr_t cpu_addr,
> > > > > > +static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8
> > > func_no,
> > > > > > +				  enum pci_barno bar, dma_addr_t cpu_addr,
> > > > > >  				  enum dw_pcie_as_type as_type)  {
> > > > > >  	int ret;
> > > > > > @@ -112,7 +120,7 @@ static int dw_pcie_ep_inbound_atu(struct
> > > > > dw_pcie_ep *ep, enum pci_barno bar,
> > > > > >  		return -EINVAL;
> > > > > >  	}
> > > > > >
> > > > > > -	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
> > > > > > +	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, bar,
> > > > > > +cpu_addr,
> > > > > >  				       as_type);
> > > > > >  	if (ret < 0) {
> > > > > >  		dev_err(pci->dev, "Failed to program IB window\n"); @@
> > > -125,7
> > > > > > +133,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep
> > > > > > +*ep,
> > > > > enum pci_barno bar,
> > > > > >  	return 0;
> > > > > >  }
> > > > > >
> > > > > > -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep,
> > > > > > phys_addr_t phys_addr,
> > > > > > +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8
> > > func_no,
> > > > > > +				   phys_addr_t phys_addr,
> > > > > >  				   u64 pci_addr, size_t size)  {
> > > > > >  	u32 free_win;
> > > > > > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> > > > > dw_pcie_ep *ep, phys_addr_t phys_addr,
> > > > > >  		return -EINVAL;
> > > > > >  	}
> > > > > >
> > > > > > -	dw_pcie_prog_outbound_atu(pci, free_win,
> PCIE_ATU_TYPE_MEM,
> > > > > > -				  phys_addr, pci_addr, size);
> > > > > > +	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win,
> > > > > PCIE_ATU_TYPE_MEM,
> > > > > > +				     phys_addr, pci_addr, size);
> > > > > >
> > > > > >  	set_bit(free_win, ep->ob_window_map);
> > > > > >  	ep->outbound_addr[free_win] = phys_addr; @@ -154,7 +163,7
> > > @@
> > > > > static
> > > > > > void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
> > > > > >  	enum pci_barno bar = epf_bar->barno;
> > > > > >  	u32 atu_index = ep->bar_to_atu[bar];
> > > > > >
> > > > > > -	__dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags);
> > > > > > +	__dw_pcie_ep_reset_bar(pci, func_no, bar, epf_bar->flags);
> > > > > >
> > > > > >  	dw_pcie_disable_atu(pci, atu_index,
> > > DW_PCIE_REGION_INBOUND);
> > > > > >  	clear_bit(atu_index, ep->ib_window_map); @@ -170,14
> +179,16
> > > @@
> > > > > > static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
> > > > > >  	size_t size = epf_bar->size;
> > > > > >  	int flags = epf_bar->flags;
> > > > > >  	enum dw_pcie_as_type as_type;
> > > > > > -	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > > +	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar) + pf_base;
> > > > > >
> > > > > >  	if (!(flags & PCI_BASE_ADDRESS_SPACE))
> > > > > >  		as_type = DW_PCIE_AS_MEM;
> > > > > >  	else
> > > > > >  		as_type = DW_PCIE_AS_IO;
> > > > > >
> > > > > > -	ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr,
> > > as_type);
> > > > > > +	ret = dw_pcie_ep_inbound_atu(ep, func_no, bar,
> > > > > > +				     epf_bar->phys_addr, as_type);
> > > > > >  	if (ret)
> > > > > >  		return ret;
> > > > > >
> > > > > > @@ -235,7 +246,7 @@ static int dw_pcie_ep_map_addr(struct
> > > > > > pci_epc
> > > > > *epc, u8 func_no,
> > > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > >
> > > > > > -	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
> > > > > > +	ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr,
> > > > > > +size);
> > > > > >  	if (ret) {
> > > > > >  		dev_err(pci->dev, "Failed to enable address\n");
> > > > > >  		return ret;
> > > > > > @@ -248,12 +259,13 @@ static int dw_pcie_ep_get_msi(struct
> > > > > > pci_epc *epc, u8 func_no)  {
> > > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >  	u32 val, reg;
> > > > > >
> > > > > >  	if (!ep->msi_cap)
> > > > > >  		return -EINVAL;
> > > > > >
> > > > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > > >  	if (!(val & PCI_MSI_FLAGS_ENABLE))
> > > > > >  		return -EINVAL;
> > > > > > @@ -267,12 +279,13 @@ static int dw_pcie_ep_set_msi(struct
> > > > > > pci_epc *epc, u8 func_no, u8 interrupts)  {
> > > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >  	u32 val, reg;
> > > > > >
> > > > > >  	if (!ep->msi_cap)
> > > > > >  		return -EINVAL;
> > > > > >
> > > > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > > >  	val &= ~PCI_MSI_FLAGS_QMASK;
> > > > > >  	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK; @@
> -287,12
> > > > > > +300,13 @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc,
> > > > > > +u8
> > > func_no)  {
> > > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >  	u32 val, reg;
> > > > > >
> > > > > >  	if (!ep->msix_cap)
> > > > > >  		return -EINVAL;
> > > > > >
> > > > > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > > >  	if (!(val & PCI_MSIX_FLAGS_ENABLE))
> > > > > >  		return -EINVAL;
> > > > > > @@ -306,12 +320,13 @@ static int dw_pcie_ep_set_msix(struct
> > > > > > pci_epc *epc, u8 func_no, u16 interrupts)  {
> > > > > >  	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> > > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >  	u32 val, reg;
> > > > > >
> > > > > >  	if (!ep->msix_cap)
> > > > > >  		return -EINVAL;
> > > > > >
> > > > > > -	reg = ep->msix_cap + PCI_MSIX_FLAGS;
> > > > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
> > > > > >  	val = dw_pcie_readw_dbi(pci, reg);
> > > > > >  	val &= ~PCI_MSIX_FLAGS_QSIZE;
> > > > > >  	val |= interrupts;
> > > > > > @@ -400,6 +415,7 @@ int dw_pcie_ep_raise_msi_irq(struct
> > > dw_pcie_ep
> > > > > *ep, u8 func_no,
> > > > > >  	unsigned int aligned_offset;
> > > > > >  	u16 msg_ctrl, msg_data;
> > > > > >  	u32 msg_addr_lower, msg_addr_upper, reg;
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >  	u64 msg_addr;
> > > > > >  	bool has_upper;
> > > > > >  	int ret;
> > > > > > @@ -408,19 +424,19 @@ int dw_pcie_ep_raise_msi_irq(struct
> > > > > dw_pcie_ep *ep, u8 func_no,
> > > > > >  		return -EINVAL;
> > > > > >
> > > > > >  	/* Raise MSI per the PCI Local Bus Specification Revision 3.0,
> 6.8.1.
> > > */
> > > > > > -	reg = ep->msi_cap + PCI_MSI_FLAGS;
> > > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
> > > > > >  	msg_ctrl = dw_pcie_readw_dbi(pci, reg);
> > > > > >  	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
> > > > > > -	reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
> > > > > > +	reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_LO;
> > > > > >  	msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > > > > >  	if (has_upper) {
> > > > > > -		reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
> > > > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_HI;
> > > > > >  		msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
> > > > > > -		reg = ep->msi_cap + PCI_MSI_DATA_64;
> > > > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_64;
> > > > > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > > > > >  	} else {
> > > > > >  		msg_addr_upper = 0;
> > > > > > -		reg = ep->msi_cap + PCI_MSI_DATA_32;
> > > > > > +		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_32;
> > > > > >  		msg_data = dw_pcie_readw_dbi(pci, reg);
> > > > > >  	}
> > > > > >  	aligned_offset = msg_addr_lower & (epc->mem->page_size -
> 1);
> > > @@
> > > > > > -439,7 +455,7 @@ int dw_pcie_ep_raise_msi_irq(struct
> > > > > > dw_pcie_ep *ep,
> > > > > > u8 func_no,  }
> > > > > >
> > > > > >  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8
> func_no,
> > > > > > -			     u16 interrupt_num)
> > > > > > +			      u16 interrupt_num)
> > > > > >  {
> > > > > >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > > > >  	struct pci_epc *epc = ep->epc; @@ -447,16 +463,17 @@ int
> > > > > > dw_pcie_ep_raise_msix_irq(struct
> > > > > dw_pcie_ep *ep, u8 func_no,
> > > > > >  	u32 bar_addr_upper, bar_addr_lower;
> > > > > >  	u32 msg_addr_upper, msg_addr_lower;
> > > > > >  	u32 reg, msg_data, vec_ctrl;
> > > > > > +	u32 pf_base = func_no * epc->pf_offset;
> > > > > >  	u64 tbl_addr, msg_addr, reg_u64;
> > > > > >  	void __iomem *msix_tbl;
> > > > > >  	int ret;
> > > > > >
> > > > > > -	reg = ep->msix_cap + PCI_MSIX_TABLE;
> > > > > > +	reg = ep->msix_cap + pf_base + PCI_MSIX_TABLE;
> > > > > >  	tbl_offset = dw_pcie_readl_dbi(pci, reg);
> > > > > >  	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
> > > > > >  	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
> > > > > >
> > > > > > -	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
> > > > > > +	reg = PCI_BASE_ADDRESS_0 + pf_base + (4 * bir);
> > > > > >  	bar_addr_upper = 0;
> > > > > >  	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
> > > > > >  	reg_u64 = (bar_addr_lower &
> > > PCI_BASE_ADDRESS_MEM_TYPE_MASK);
> > > > > @@
> > > > > > -592,13 +609,17 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> > > > > >  	ep->epc = epc;
> > > > > >  	epc_set_drvdata(epc, ep);
> > > > > >
> > > > > > -	if (ep->ops->ep_init)
> > > > > > -		ep->ops->ep_init(ep);
> > > > > > -
> > > > > >  	ret = of_property_read_u8(np, "max-functions",
> > > &epc->max_functions);
> > > > > >  	if (ret < 0)
> > > > > >  		epc->max_functions = 1;
> > > > > >
> > > > > > +	ret = of_property_read_u32(np, "pf-offset", &epc->pf_offset);
> > > > > > +	if (ret < 0)
> > > > > > +		epc->pf_offset = 0;
> > > > >
> > > > > Bad things will likely happen if max_functions > 1 and pf-offset isn't
> set.
> > > > > I think the driver should bail in this situation. It would be
> > > > > very easy for someone to misconfigure this.
> > > > Yes, you are right, but if the max-functions have defined in DTS,
> > > > require the pf-offset must define in DTS, I am not sure the
> > > > correct value of pf-offsetfor other platforms, so I think the
> > > > max-functions and
> > > pf-offset should not have the dependence.
> > >
> > > Yes you're correct. I hadn't really thought about this beyond
> > > layerscape. It's also possible that other hardware could support
> > > multiple PFs without relying on an offset and perhaps employ some
> > > other mechanism to access different functions. So whilst this
> > > property can be optional for the majority of dwc controllers - it must be
> set and cannot be zero for layerscape.
> > >
> > > Perhaps inside ls_pcie_ep_init, you can set max_functions to 1 if
> > > pf_offset is
> > > 0 and print a WARN to explain why? (Or ls_pcie_ep_init returns
> > > failure and dw_pcie_ep_init checks it and bails).
> > >
> > > The assumption is being made here that future dw controllers may
> > > also use pf_offset (is this likely?) - otherwise why is this in
> > > pcie-designware-ep.c and not pci-layerscape-ep.c and why is this value
> not just hard-coded for lp?
> >
> > Thanks a lot for your detail comments, this give me a lot of help.
> > Yes, I agree your point, and I will seriously consider a best way to fix this
> potential issue.
> > Based on your experience, how do other platforms implement the multiple
> functions?
> > The DWC core difference the different PF by signal
> "client0_tlp_func_num[(PF_WD-1):0]"
> 
> I don't know, though looking at the kernel drivers suggests that the existing EP
> controllers have a large address space which contains multiple PFs. They are
> accessed via macros (ROCKCHIP_PCIE_EP_FUNC_BASE(fn),
> CDNS_PCIE_EP_FUNC_BASE(fn)). It would be possible, but probably not
> desirable to have a smaller address space (window) and a register that selects
> which function the window refers to. This is why I'm slight nervous of
> assuming that a pf-offset will cover all future dw drivers - I may be wrong.
OK, thanks, maybe other people have good advice. I will use the macro to implement
the multiple function in v2 patch.
> 
> > >
> > >
> > > > even though I didn't define pf-offset when I defined
> > > > max-functions, the pf-offset is 0, the DWC ep driver can continue
> > > > run the progress of INIT but not return, of course, thus the PF1
> > > > will not work, I don't know which
> > > way is better.
> > Hi Andrew,
> > > > >
> > > > >
> > > > > > +
> > > > > > +	if (ep->ops->ep_init)
> > > > > > +		ep->ops->ep_init(ep);
> > > > > > +
> > > > > >  	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
> > > > > >  				 ep->page_size);
> > > > > >  	if (ret < 0) {
> > > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> > > > > > b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > > index 7d25102..c99cee4 100644
> > > > > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > > > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > > > > @@ -158,6 +158,43 @@ static void
> > > > > > dw_pcie_writel_ob_unroll(struct
> > > > > dw_pcie *pci, u32 index, u32 reg,
> > > > > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > > > > >
> > > > > > +static void dw_pcie_prog_ep_outbound_atu_unroll(struct
> > > > > > +dw_pcie *pci, u8
> > > > > func_no,
> > > > > > +						int index, int type,
> > > > > > +						u64 cpu_addr, u64 pci_addr,
> > > > > > +						u32 size)
> > > > > > +{
> > > > > > +	u32 retries, val;
> > > > > > +
> > > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > > PCIE_ATU_UNR_LOWER_BASE,
> > > > > > +				 lower_32_bits(cpu_addr));
> > > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > > PCIE_ATU_UNR_UPPER_BASE,
> > > > > > +				 upper_32_bits(cpu_addr));
> > > > > > +	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
> > > > > > +				 lower_32_bits(cpu_addr + size - 1));
> > > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > > PCIE_ATU_UNR_LOWER_TARGET,
> > > > > > +				 lower_32_bits(pci_addr));
> > > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > > PCIE_ATU_UNR_UPPER_TARGET,
> > > > > > +				 upper_32_bits(pci_addr));
> > > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > > PCIE_ATU_UNR_REGION_CTRL1,
> > > > > > +				 type | PCIE_ATU_FUNC_NUM(func_no));
> > > > >
> > > > > With the exception of this line, the rest of this function is
> > > > > identical to dw_pcie_prog_outbound_atu_unroll.
> > > > Yes, I can integrate the same code, but I think we'd better use
> > > > the different outbound window set function between RC and EP,
> > > > because the RC
> > > don't need the func_num parameter.
> > >
> > >
> > >
> > > > >
> > > > > > +	dw_pcie_writel_ob_unroll(pci, index,
> > > PCIE_ATU_UNR_REGION_CTRL2,
> > > > > > +				 PCIE_ATU_ENABLE);
> > > > > > +
> > > > > > +	/*
> > > > > > +	 * Make sure ATU enable takes effect before any subsequent
> config
> > > > > > +	 * and I/O accesses.
> > > > > > +	 */
> > > > > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES;
> > > > > > +retries++)
> > > {
> > > > > > +		val = dw_pcie_readl_ob_unroll(pci, index,
> > > > > > +					      PCIE_ATU_UNR_REGION_CTRL2);
> > > > > > +		if (val & PCIE_ATU_ENABLE)
> > > > > > +			return;
> > > > > > +
> > > > > > +		mdelay(LINK_WAIT_IATU);
> > > > > > +	}
> > > > > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > > > > +
> > > > > >  static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie
> > > > > > *pci, int
> > > > > index,
> > > > > >  					     int type, u64 cpu_addr,
> > > > > >  					     u64 pci_addr, u32 size) @@ -194,6
> > > +231,51 @@ static
> > > > > > void
> > > > > dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
> > > > > >  	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
> > > > > > }
> > > > > >
> > > > > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8
> > > > > > +func_no, int
> > > > > index,
> > > > > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > > > > +				  u32 size)
> > > > > > +{
> > > > > > +	u32 retries, val;
> > > > > > +
> > > > > > +	if (pci->ops->cpu_addr_fixup)
> > > > > > +		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
> > > > > > +
> > > > > > +	if (pci->iatu_unroll_enabled) {
> > > > > > +		dw_pcie_prog_ep_outbound_atu_unroll(pci, func_no,
> index,
> > > type,
> > > > > > +						    cpu_addr, pci_addr, size);
> > > > > > +		return;
> > > > > > +	}
> > > > > > +
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > > > > > +			   PCIE_ATU_REGION_OUTBOUND | index);
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
> > > > > > +			   lower_32_bits(cpu_addr));
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
> > > > > > +			   upper_32_bits(cpu_addr));
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> > > > > > +			   lower_32_bits(cpu_addr + size - 1));
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> > > > > > +			   lower_32_bits(pci_addr));
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> > > > > > +			   upper_32_bits(pci_addr));
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > > > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > > > >
> > > > > The same here, this is identical to dw_pcie_prog_outbound_atu
> > > > > with the exception of this line.
> > > > >
> > > > > Is there a way you can avoid all of this duplicated code?
> > > > As above, I can integrate the same code, but I keep to think the
> > > > different outbound Window set function should be used between RC and
> EP.
> > >
> > > Or, is it possible to keep and use the existing functions, but use
> > > them differently, e.g:
> > >
> > >
> > > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> > > dw_pcie_ep *ep, phys_addr_t phys_addr,
> > >                 return -EINVAL;
> > >         }
> > >
> > > -       dw_pcie_prog_outbound_atu(pci, free_win,
> PCIE_ATU_TYPE_MEM,
> > > -                                 phys_addr, pci_addr, size);
> > > +       dw_pcie_prog_outbound_atu(pci, free_win,
> > > PCIE_ATU_TYPE_MEM_FUNC(func_no),
> > > +                                    phys_addr, pci_addr, size);
> > >
> > >         set_bit(free_win, ep->ob_window_map);
> > >         ep->outbound_addr[free_win] = phys_addr;
> > >
> > >
> > > Supported with:
> > >
> > > #define PCIE_ATU_TYPE_MEM               0x0
> > > #define PCIE_ATU_TYPE_MEM_FUNC(func_no) (PCIE_ATU_TYPE_MEM |
> > > PCIE_ATU_FUNC_NUM(func_no))
> > >
> > >
> > > This is just a suggestion, but I'm keen to avoid code duplication.
> > Thanks, I have think of a way as follow:
> >
> > This is a good way, but I think PCIE_ATU_TYPE_MEM_FUNC(func_no) will
> > give Someone confused meaning, because PCIE_ATU_TYPE_MEM indicate
> the
> > type of TLP, and the location in the bit[0:3] of register CR1, but the
> > PCIE_ATU_FUNC_NUM is bit[20:24], I have another way:
> > @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> > dw_pcie_ep *ep, phys_addr_t phys_addr,
> >                  return -EINVAL;
> >         }
> >
> > 		dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
> >                                 phys_addr, pci_addr, size);
> > +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR1);
> > +		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val |
> > +PCIE_ATU_FUNC_NUM(func_no));
> > or
> > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
> > +                                   int type, u64 cpu_addr, u64
> pci_addr,
> > +                                   u32 size) {
> > +		dw_pcie_prog_outbound_atu(pci, index, type, cpu_addr, pci_addr,
> size);
> > +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR1);
> > +		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val |
> > +PCIE_ATU_FUNC_NUM(func_no)); }
> >
> > Which do you think is better of these three ways?
> 
> Building upon your idea, how about:
> 
> 
>  @@ -137,8 +146,8 @@ static int dw_pcie_ep_outbound_atu(struct
> dw_pcie_ep *ep, phys_addr_t phys_addr,
>                  return -EINVAL;
>          }
> 
>  -       dw_pcie_prog_outbound_atu(pci, free_win,
> PCIE_ATU_TYPE_MEM,
>  -                                 phys_addr, pci_addr, size);
>  +       dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win,
> PCIE_ATU_TYPE_MEM
>  +                                    phys_addr, pci_addr, size);
> 
>          set_bit(free_win, ep->ob_window_map);
>          ep->outbound_addr[free_win] = phys_addr;
> 
> 
>  +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
>  +                                   int type, u64 cpu_addr, u64
> pci_addr,
>  +                                   u32 size)
>  +{
>  +		__dw_pcie_prog_outbound_atu(pci, func_no, index, type, cpu_addr,
> pci_addr, size);
>  +}
>  +
>  +void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, int
> index,
>  +                                   int type, u64 cpu_addr, u64
> pci_addr,
>  +                                   u32 size)
>  +{
>  +		__dw_pcie_prog_outbound_atu(pci, 0, index, type, cpu_addr,
> pci_addr, size);
>  +}
> 
> In other words dw_pcie_prog_outbound_atu is updated (and renamed) to
> always take a func_no and for host controllers this is always set to zero. Or
> you could follow the approach taken in the cadence drivers for their
> implementation of cdns_pcie_set_outbound_region - this always takes a
> func_no and is used by host controller and endpoint drivers (except they don't
> have the helper wrapper functions above thus exposing fn=0 to host
> controllers).
You're correct, I think this way is better, thanks.
> 
> > >
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Andrew Murray
> > > > >
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
> > > > > > +
> > > > > > +	/*
> > > > > > +	 * Make sure ATU enable takes effect before any subsequent
> config
> > > > > > +	 * and I/O accesses.
> > > > > > +	 */
> > > > > > +	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES;
> > > > > > +retries++)
> > > {
> > > > > > +		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
> > > > > > +		if (val & PCIE_ATU_ENABLE)
> > > > > > +			return;
> > > > > > +
> > > > > > +		mdelay(LINK_WAIT_IATU);
> > > > > > +	}
> > > > > > +	dev_err(pci->dev, "Outbound iATU is not being enabled\n"); }
> > > > > > +
> > > > > >  void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int
> > > > > > index, int
> > > type,
> > > > > >  			       u64 cpu_addr, u64 pci_addr, u32 size)
> { @@
> > > -252,8
> > > > > +334,8
> > > > > > @@ static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci,
> > > > > > u32 index,
> > > > > u32 reg,
> > > > > >  	dw_pcie_writel_atu(pci, offset + reg, val);  }
> > > > > >
> > > > > > -static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie
> > > > > > *pci, int
> > > index,
> > > > > > -					   int bar, u64 cpu_addr,
> > > > > > +static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie
> > > > > > +*pci,
> > > > > > +u8
> > > > > func_no,
> > > > > > +					   int index, int bar, u64 cpu_addr,
> > > > > >  					   enum dw_pcie_as_type as_type)  {
> > > > > >  	int type;
> > > > > > @@ -275,8 +357,10 @@ static int
> > > > > > dw_pcie_prog_inbound_atu_unroll(struct
> > > > > dw_pcie *pci, int index,
> > > > > >  		return -EINVAL;
> > > > > >  	}
> > > > > >
> > > > > > -	dw_pcie_writel_ib_unroll(pci, index,
> > > PCIE_ATU_UNR_REGION_CTRL1,
> > > > > type);
> > > > > > +	dw_pcie_writel_ib_unroll(pci, index,
> > > PCIE_ATU_UNR_REGION_CTRL1,
> > > > > type |
> > > > > > +				 PCIE_ATU_FUNC_NUM(func_no));
> > > > > >  	dw_pcie_writel_ib_unroll(pci, index,
> > > PCIE_ATU_UNR_REGION_CTRL2,
> > > > > > +				 PCIE_ATU_FUNC_NUM_MATCH_EN |
> > > > > >  				 PCIE_ATU_ENABLE |
> > > > > >  				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > > > >
> > > > > > @@ -297,14 +381,15 @@ static int
> > > > > dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
> > > > > >  	return -EBUSY;
> > > > > >  }
> > > > > >
> > > > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int
> bar,
> > > > > > -			     u64 cpu_addr, enum dw_pcie_as_type
> as_type)
> > > > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no,
> > > > > > +int
> > > index,
> > > > > > +			     int bar, u64 cpu_addr,
> > > > > > +			     enum dw_pcie_as_type as_type)
> > > > > >  {
> > > > > >  	int type;
> > > > > >  	u32 retries, val;
> > > > > >
> > > > > >  	if (pci->iatu_unroll_enabled)
> > > > > > -		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
> > > > > > +		return dw_pcie_prog_inbound_atu_unroll(pci, func_no,
> index,
> > > > > > +bar,
> > > > > >  						       cpu_addr, as_type);
> > > > > >
> > > > > >  	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
> > > > > PCIE_ATU_REGION_INBOUND |
> > > > > > @@ -323,9 +408,11 @@ int dw_pcie_prog_inbound_atu(struct
> > > > > > dw_pcie
> > > > > *pci, int index, int bar,
> > > > > >  		return -EINVAL;
> > > > > >  	}
> > > > > >
> > > > > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
> > > > > > -	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
> > > > > > -			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> > > > > > +			   PCIE_ATU_FUNC_NUM(func_no));
> > > > > > +	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
> > > > > > +			   PCIE_ATU_FUNC_NUM_MATCH_EN |
> > > > > > +			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
> > > > > >
> > > > > >  	/*
> > > > > >  	 * Make sure ATU enable takes effect before any subsequent
> > > > > > config diff --git
> > > > > > a/drivers/pci/controller/dwc/pcie-designware.h
> > > > > > b/drivers/pci/controller/dwc/pcie-designware.h
> > > > > > index ffed084..2b291e8 100644
> > > > > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > > > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > > > > @@ -71,9 +71,11 @@
> > > > > >  #define PCIE_ATU_TYPE_IO		0x2
> > > > > >  #define PCIE_ATU_TYPE_CFG0		0x4
> > > > > >  #define PCIE_ATU_TYPE_CFG1		0x5
> > > > > > +#define PCIE_ATU_FUNC_NUM(pf)           (pf << 20)
> > > > > >  #define PCIE_ATU_CR2			0x908
> > > > > >  #define PCIE_ATU_ENABLE			BIT(31)
> > > > > >  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> > > > > > +#define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
> > > > > >  #define PCIE_ATU_LOWER_BASE		0x90C
> > > > > >  #define PCIE_ATU_UPPER_BASE		0x910
> > > > > >  #define PCIE_ATU_LIMIT			0x914
> > > > > > @@ -265,8 +267,12 @@ int dw_pcie_wait_for_link(struct dw_pcie
> > > > > > *pci); void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int
> index,
> > > > > >  			       int type, u64 cpu_addr, u64 pci_addr,
> > > > > >  			       u32 size);
> > > > > > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int
> bar,
> > > > > > -			     u64 cpu_addr, enum dw_pcie_as_type
> as_type);
> > > > > > +void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8
> > > > > > +func_no, int
> > > > > index,
> > > > > > +				  int type, u64 cpu_addr, u64 pci_addr,
> > > > > > +				  u32 size);
> > > > > > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no,
> > > > > > +int
> > > index,
> > > > > > +			     int bar, u64 cpu_addr,
> > > > > > +			     enum dw_pcie_as_type as_type);
> > > > > >  void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
> > > > > >  			 enum dw_pcie_region_type type);  void
> > > dw_pcie_setup(struct
> > > > > > dw_pcie *pci); diff --git a/include/linux/pci-epc.h
> > > > > > b/include/linux/pci-epc.h index f641bad..fc2feee 100644
> > > > > > --- a/include/linux/pci-epc.h
> > > > > > +++ b/include/linux/pci-epc.h
> > > > > > @@ -96,6 +96,7 @@ struct pci_epc {
> > > > > >  	const struct pci_epc_ops	*ops;
> > > > > >  	struct pci_epc_mem		*mem;
> > > > > >  	u8				max_functions;
> > > > > > +	u32				pf_offset;
> > >
> > > Also pf_offset is an implementation detail needed only by the driver
> > > to calculate where the PF is - it doesn't seem right that we share
> > > this with the EP controller framework (whereas max_functions is used
> > > as a bounds check for func_no in the framework calls).
> > >
> > > I'd suggest that pf_offset is moved to a dwc structure, perhaps
> dw_pcie_ep?
> > I add the variable to this struct is consider that all PF is belong to
> > a PCIe controller, and the pci_epc indicate a PCIe controller, so I
> > add this variable to this struct, what do you think about this? I am not sure
> whether I should add this variable to dw_pcie_ep.
> 
> The EPC framework won't use the pf_offset and doesn't need it. It abstracts
> the complexity of writing to the config address space (and similar) through the
> pci_epc_ops. I'd suggest that the EPC framework (and pci_epc struct) only
> needs to contain what *it* needs. Especially given that not all ep drivers have
> a pf_offset or similar.
> 
> I understand the logic that pci_epc represents a EP controller, but I think you
> should consider that it actually represents a *generic* EP controller in the
> context of a framework which solely serves the purpose of connecting
> controllers with functions. Whereas the dw_pcie_ep represents a specific
> type of controller (DW) - as the pf_offset is (so far) relating to only DW
> controllers (and as confirmed by the DT mapping) then it makes sense to not
> move pf_offset from the specialised specific controller to the generic
> controller. (Or at least this is how I rationalise it, though the EPC framework is
> something quite unfamiliar to me).
I think this is more reasonable by your detail explaining, I will move pf_offset
to the struct dw_pcie_ep, thanks again!
> 
> Thanks,
> 
> Andrew Murray
> 
> > >
> > > Thanks,
> > >
> > > Andrew Murray
> > >
> > > > > >  	struct config_group		*group;
> > > > > >  	/* spinlock to protect against concurrent access of EP
> controller */
> > > > > >  	spinlock_t			lock;
> > > > > > --
> > > > > > 2.9.5
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > linux-arm-kernel mailing list
> > > > > > linux-arm-kernel@lists.infradead.org
> > > > > > http://lists
> > > > > > .infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&amp;dat
> > > > > > a=0
> > > 2
> > > > > > %
> > > > > 7C0
> > > > > >
> > > > >
> > >
> 1%7Cxiaowei.bao%40nxp.com%7C0e39168f6f144db6840308d721742040%7
> > > > > C686ea1d
> > > > > >
> > > > >
> > >
> 3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637014654998524452&amp;sd
> > > > > ata=bP7eh
> > > > > > cjlGXCMVFE2b4f12Q6fGV7lQ%2F5i9qIi9FoPlbI%3D&amp;reserved=0
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 2bf5a35..75e2955 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -19,12 +19,14 @@  void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
 	pci_epc_linkup(epc);
 }
 
-static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar,
-				   int flags)
+static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
+				   enum pci_barno bar, int flags)
 {
 	u32 reg;
+	struct pci_epc *epc = pci->ep.epc;
+	u32 pf_base = func_no * epc->pf_offset;
 
-	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+	reg = pf_base + PCI_BASE_ADDRESS_0 + (4 * bar);
 	dw_pcie_dbi_ro_wr_en(pci);
 	dw_pcie_writel_dbi2(pci, reg, 0x0);
 	dw_pcie_writel_dbi(pci, reg, 0x0);
@@ -37,7 +39,12 @@  static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar,
 
 void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
 {
-	__dw_pcie_ep_reset_bar(pci, bar, 0);
+	u8 func_no, funcs;
+
+	funcs = pci->ep.epc->max_functions;
+
+	for (func_no = 0; func_no < funcs; func_no++)
+		__dw_pcie_ep_reset_bar(pci, func_no, bar, 0);
 }
 
 static u8 __dw_pcie_ep_find_next_cap(struct dw_pcie *pci, u8 cap_ptr,
@@ -78,28 +85,29 @@  static int dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 pf_base = func_no * epc->pf_offset;
 
 	dw_pcie_dbi_ro_wr_en(pci);
-	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
-	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
-	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
-	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
-	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
+	dw_pcie_writew_dbi(pci, pf_base + PCI_VENDOR_ID, hdr->vendorid);
+	dw_pcie_writew_dbi(pci, pf_base + PCI_DEVICE_ID, hdr->deviceid);
+	dw_pcie_writeb_dbi(pci, pf_base + PCI_REVISION_ID, hdr->revid);
+	dw_pcie_writeb_dbi(pci, pf_base + PCI_CLASS_PROG, hdr->progif_code);
+	dw_pcie_writew_dbi(pci, pf_base + PCI_CLASS_DEVICE,
 			   hdr->subclass_code | hdr->baseclass_code << 8);
-	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
+	dw_pcie_writeb_dbi(pci, pf_base + PCI_CACHE_LINE_SIZE,
 			   hdr->cache_line_size);
-	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
+	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_VENDOR_ID,
 			   hdr->subsys_vendor_id);
-	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
-	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
+	dw_pcie_writew_dbi(pci, pf_base + PCI_SUBSYSTEM_ID, hdr->subsys_id);
+	dw_pcie_writeb_dbi(pci, pf_base + PCI_INTERRUPT_PIN,
 			   hdr->interrupt_pin);
 	dw_pcie_dbi_ro_wr_dis(pci);
 
 	return 0;
 }
 
-static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
-				  dma_addr_t cpu_addr,
+static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no,
+				  enum pci_barno bar, dma_addr_t cpu_addr,
 				  enum dw_pcie_as_type as_type)
 {
 	int ret;
@@ -112,7 +120,7 @@  static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
 		return -EINVAL;
 	}
 
-	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
+	ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, bar, cpu_addr,
 				       as_type);
 	if (ret < 0) {
 		dev_err(pci->dev, "Failed to program IB window\n");
@@ -125,7 +133,8 @@  static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
 	return 0;
 }
 
-static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
+static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
+				   phys_addr_t phys_addr,
 				   u64 pci_addr, size_t size)
 {
 	u32 free_win;
@@ -137,8 +146,8 @@  static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
 		return -EINVAL;
 	}
 
-	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
-				  phys_addr, pci_addr, size);
+	dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM,
+				     phys_addr, pci_addr, size);
 
 	set_bit(free_win, ep->ob_window_map);
 	ep->outbound_addr[free_win] = phys_addr;
@@ -154,7 +163,7 @@  static void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
 	enum pci_barno bar = epf_bar->barno;
 	u32 atu_index = ep->bar_to_atu[bar];
 
-	__dw_pcie_ep_reset_bar(pci, bar, epf_bar->flags);
+	__dw_pcie_ep_reset_bar(pci, func_no, bar, epf_bar->flags);
 
 	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
 	clear_bit(atu_index, ep->ib_window_map);
@@ -170,14 +179,16 @@  static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
 	size_t size = epf_bar->size;
 	int flags = epf_bar->flags;
 	enum dw_pcie_as_type as_type;
-	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+	u32 pf_base = func_no * epc->pf_offset;
+	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar) + pf_base;
 
 	if (!(flags & PCI_BASE_ADDRESS_SPACE))
 		as_type = DW_PCIE_AS_MEM;
 	else
 		as_type = DW_PCIE_AS_IO;
 
-	ret = dw_pcie_ep_inbound_atu(ep, bar, epf_bar->phys_addr, as_type);
+	ret = dw_pcie_ep_inbound_atu(ep, func_no, bar,
+				     epf_bar->phys_addr, as_type);
 	if (ret)
 		return ret;
 
@@ -235,7 +246,7 @@  static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no,
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 
-	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
+	ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr, size);
 	if (ret) {
 		dev_err(pci->dev, "Failed to enable address\n");
 		return ret;
@@ -248,12 +259,13 @@  static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 pf_base = func_no * epc->pf_offset;
 	u32 val, reg;
 
 	if (!ep->msi_cap)
 		return -EINVAL;
 
-	reg = ep->msi_cap + PCI_MSI_FLAGS;
+	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
 	val = dw_pcie_readw_dbi(pci, reg);
 	if (!(val & PCI_MSI_FLAGS_ENABLE))
 		return -EINVAL;
@@ -267,12 +279,13 @@  static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 pf_base = func_no * epc->pf_offset;
 	u32 val, reg;
 
 	if (!ep->msi_cap)
 		return -EINVAL;
 
-	reg = ep->msi_cap + PCI_MSI_FLAGS;
+	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
 	val = dw_pcie_readw_dbi(pci, reg);
 	val &= ~PCI_MSI_FLAGS_QMASK;
 	val |= (interrupts << 1) & PCI_MSI_FLAGS_QMASK;
@@ -287,12 +300,13 @@  static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 pf_base = func_no * epc->pf_offset;
 	u32 val, reg;
 
 	if (!ep->msix_cap)
 		return -EINVAL;
 
-	reg = ep->msix_cap + PCI_MSIX_FLAGS;
+	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
 	val = dw_pcie_readw_dbi(pci, reg);
 	if (!(val & PCI_MSIX_FLAGS_ENABLE))
 		return -EINVAL;
@@ -306,12 +320,13 @@  static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 pf_base = func_no * epc->pf_offset;
 	u32 val, reg;
 
 	if (!ep->msix_cap)
 		return -EINVAL;
 
-	reg = ep->msix_cap + PCI_MSIX_FLAGS;
+	reg = ep->msix_cap + pf_base + PCI_MSIX_FLAGS;
 	val = dw_pcie_readw_dbi(pci, reg);
 	val &= ~PCI_MSIX_FLAGS_QSIZE;
 	val |= interrupts;
@@ -400,6 +415,7 @@  int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 	unsigned int aligned_offset;
 	u16 msg_ctrl, msg_data;
 	u32 msg_addr_lower, msg_addr_upper, reg;
+	u32 pf_base = func_no * epc->pf_offset;
 	u64 msg_addr;
 	bool has_upper;
 	int ret;
@@ -408,19 +424,19 @@  int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 		return -EINVAL;
 
 	/* Raise MSI per the PCI Local Bus Specification Revision 3.0, 6.8.1. */
-	reg = ep->msi_cap + PCI_MSI_FLAGS;
+	reg = ep->msi_cap + pf_base + PCI_MSI_FLAGS;
 	msg_ctrl = dw_pcie_readw_dbi(pci, reg);
 	has_upper = !!(msg_ctrl & PCI_MSI_FLAGS_64BIT);
-	reg = ep->msi_cap + PCI_MSI_ADDRESS_LO;
+	reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_LO;
 	msg_addr_lower = dw_pcie_readl_dbi(pci, reg);
 	if (has_upper) {
-		reg = ep->msi_cap + PCI_MSI_ADDRESS_HI;
+		reg = ep->msi_cap + pf_base + PCI_MSI_ADDRESS_HI;
 		msg_addr_upper = dw_pcie_readl_dbi(pci, reg);
-		reg = ep->msi_cap + PCI_MSI_DATA_64;
+		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_64;
 		msg_data = dw_pcie_readw_dbi(pci, reg);
 	} else {
 		msg_addr_upper = 0;
-		reg = ep->msi_cap + PCI_MSI_DATA_32;
+		reg = ep->msi_cap + pf_base + PCI_MSI_DATA_32;
 		msg_data = dw_pcie_readw_dbi(pci, reg);
 	}
 	aligned_offset = msg_addr_lower & (epc->mem->page_size - 1);
@@ -439,7 +455,7 @@  int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 }
 
 int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
-			     u16 interrupt_num)
+			      u16 interrupt_num)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
 	struct pci_epc *epc = ep->epc;
@@ -447,16 +463,17 @@  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 	u32 bar_addr_upper, bar_addr_lower;
 	u32 msg_addr_upper, msg_addr_lower;
 	u32 reg, msg_data, vec_ctrl;
+	u32 pf_base = func_no * epc->pf_offset;
 	u64 tbl_addr, msg_addr, reg_u64;
 	void __iomem *msix_tbl;
 	int ret;
 
-	reg = ep->msix_cap + PCI_MSIX_TABLE;
+	reg = ep->msix_cap + pf_base + PCI_MSIX_TABLE;
 	tbl_offset = dw_pcie_readl_dbi(pci, reg);
 	bir = (tbl_offset & PCI_MSIX_TABLE_BIR);
 	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
 
-	reg = PCI_BASE_ADDRESS_0 + (4 * bir);
+	reg = PCI_BASE_ADDRESS_0 + pf_base + (4 * bir);
 	bar_addr_upper = 0;
 	bar_addr_lower = dw_pcie_readl_dbi(pci, reg);
 	reg_u64 = (bar_addr_lower & PCI_BASE_ADDRESS_MEM_TYPE_MASK);
@@ -592,13 +609,17 @@  int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 	ep->epc = epc;
 	epc_set_drvdata(epc, ep);
 
-	if (ep->ops->ep_init)
-		ep->ops->ep_init(ep);
-
 	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
 	if (ret < 0)
 		epc->max_functions = 1;
 
+	ret = of_property_read_u32(np, "pf-offset", &epc->pf_offset);
+	if (ret < 0)
+		epc->pf_offset = 0;
+
+	if (ep->ops->ep_init)
+		ep->ops->ep_init(ep);
+
 	ret = __pci_epc_mem_init(epc, ep->phys_base, ep->addr_size,
 				 ep->page_size);
 	if (ret < 0) {
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 7d25102..c99cee4 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -158,6 +158,43 @@  static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
 	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
+static void dw_pcie_prog_ep_outbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
+						int index, int type,
+						u64 cpu_addr, u64 pci_addr,
+						u32 size)
+{
+	u32 retries, val;
+
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
+				 lower_32_bits(cpu_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
+				 upper_32_bits(cpu_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
+				 lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+				 lower_32_bits(pci_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+				 upper_32_bits(pci_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
+				 type | PCIE_ATU_FUNC_NUM(func_no));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+				 PCIE_ATU_ENABLE);
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_ob_unroll(pci, index,
+					      PCIE_ATU_UNR_REGION_CTRL2);
+		if (val & PCIE_ATU_ENABLE)
+			return;
+
+		mdelay(LINK_WAIT_IATU);
+	}
+	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
+}
+
 static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
 					     int type, u64 cpu_addr,
 					     u64 pci_addr, u32 size)
@@ -194,6 +231,51 @@  static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
 	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
 }
 
+void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
+				  int type, u64 cpu_addr, u64 pci_addr,
+				  u32 size)
+{
+	u32 retries, val;
+
+	if (pci->ops->cpu_addr_fixup)
+		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
+
+	if (pci->iatu_unroll_enabled) {
+		dw_pcie_prog_ep_outbound_atu_unroll(pci, func_no, index, type,
+						    cpu_addr, pci_addr, size);
+		return;
+	}
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
+			   PCIE_ATU_REGION_OUTBOUND | index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
+			   lower_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
+			   upper_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
+			   lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
+			   lower_32_bits(pci_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
+			   upper_32_bits(pci_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
+			   PCIE_ATU_FUNC_NUM(func_no));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
+		if (val & PCIE_ATU_ENABLE)
+			return;
+
+		mdelay(LINK_WAIT_IATU);
+	}
+	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
+}
+
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
 			       u64 cpu_addr, u64 pci_addr, u32 size)
 {
@@ -252,8 +334,8 @@  static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
 	dw_pcie_writel_atu(pci, offset + reg, val);
 }
 
-static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
-					   int bar, u64 cpu_addr,
+static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, u8 func_no,
+					   int index, int bar, u64 cpu_addr,
 					   enum dw_pcie_as_type as_type)
 {
 	int type;
@@ -275,8 +357,10 @@  static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
 		return -EINVAL;
 	}
 
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type |
+				 PCIE_ATU_FUNC_NUM(func_no));
 	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+				 PCIE_ATU_FUNC_NUM_MATCH_EN |
 				 PCIE_ATU_ENABLE |
 				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
 
@@ -297,14 +381,15 @@  static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
 	return -EBUSY;
 }
 
-int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
-			     u64 cpu_addr, enum dw_pcie_as_type as_type)
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
+			     int bar, u64 cpu_addr,
+			     enum dw_pcie_as_type as_type)
 {
 	int type;
 	u32 retries, val;
 
 	if (pci->iatu_unroll_enabled)
-		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
+		return dw_pcie_prog_inbound_atu_unroll(pci, func_no, index, bar,
 						       cpu_addr, as_type);
 
 	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
@@ -323,9 +408,11 @@  int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
 		return -EINVAL;
 	}
 
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
-			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
+			   PCIE_ATU_FUNC_NUM(func_no));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE |
+			   PCIE_ATU_FUNC_NUM_MATCH_EN |
+			   PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
 
 	/*
 	 * Make sure ATU enable takes effect before any subsequent config
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index ffed084..2b291e8 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -71,9 +71,11 @@ 
 #define PCIE_ATU_TYPE_IO		0x2
 #define PCIE_ATU_TYPE_CFG0		0x4
 #define PCIE_ATU_TYPE_CFG1		0x5
+#define PCIE_ATU_FUNC_NUM(pf)           (pf << 20)
 #define PCIE_ATU_CR2			0x908
 #define PCIE_ATU_ENABLE			BIT(31)
 #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
+#define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
 #define PCIE_ATU_LOWER_BASE		0x90C
 #define PCIE_ATU_UPPER_BASE		0x910
 #define PCIE_ATU_LIMIT			0x914
@@ -265,8 +267,12 @@  int dw_pcie_wait_for_link(struct dw_pcie *pci);
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
 			       int type, u64 cpu_addr, u64 pci_addr,
 			       u32 size);
-int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
-			     u64 cpu_addr, enum dw_pcie_as_type as_type);
+void dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index,
+				  int type, u64 cpu_addr, u64 pci_addr,
+				  u32 size);
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
+			     int bar, u64 cpu_addr,
+			     enum dw_pcie_as_type as_type);
 void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
 			 enum dw_pcie_region_type type);
 void dw_pcie_setup(struct dw_pcie *pci);
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index f641bad..fc2feee 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -96,6 +96,7 @@  struct pci_epc {
 	const struct pci_epc_ops	*ops;
 	struct pci_epc_mem		*mem;
 	u8				max_functions;
+	u32				pf_offset;
 	struct config_group		*group;
 	/* spinlock to protect against concurrent access of EP controller */
 	spinlock_t			lock;