diff mbox series

[v3,3/3] PCI: pciehp: Add dmi table for in-band presence disabled

Message ID 20191017193256.3636-4-stuart.w.hayes@gmail.com (mailing list archive)
State Superseded, archived
Headers show
Series PCI: pciehp: Do not turn off slot if presence comes up after link | expand

Commit Message

stuart hayes Oct. 17, 2019, 7:32 p.m. UTC
Some systems have in-band presence detection disabled for hot-plug PCI
slots, but do not report this in the slot capabilities 2 (SLTCAP2) register.
On these systems, presence detect can become active well after the link is
reported to be active, which can cause the slots to be disabled after a
device is connected.

Add a dmi table to flag these systems as having in-band presence disabled.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
---
 drivers/pci/hotplug/pciehp_hpc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Mika Westerberg Oct. 21, 2019, 1:47 p.m. UTC | #1
On Thu, Oct 17, 2019 at 03:32:56PM -0400, Stuart Hayes wrote:
> Some systems have in-band presence detection disabled for hot-plug PCI
> slots, but do not report this in the slot capabilities 2 (SLTCAP2) register.
> On these systems, presence detect can become active well after the link is
> reported to be active, which can cause the slots to be disabled after a
> device is connected.
> 
> Add a dmi table to flag these systems as having in-band presence disabled.
> 
> Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
> ---
>  drivers/pci/hotplug/pciehp_hpc.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index 02eb811a014f..4d377a2a62ce 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -14,6 +14,7 @@
>  
>  #define dev_fmt(fmt) "pciehp: " fmt
>  
> +#include <linux/dmi.h>
>  #include <linux/kernel.h>
>  #include <linux/types.h>
>  #include <linux/jiffies.h>
> @@ -26,6 +27,16 @@
>  #include "../pci.h"
>  #include "pciehp.h"
>  
> +static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
> +	{
> +		.ident = "Dell System",
> +		.matches = {
> +			DMI_MATCH(DMI_OEM_STRING, "Dell System"),

Sorry if this has been discussed previously already but isn't this going
to apply on all Dell systems, not just the affected ones? Is this the
intention?
stuart hayes Oct. 21, 2019, 6:19 p.m. UTC | #2
On 10/21/19 8:47 AM, Mika Westerberg wrote:
> On Thu, Oct 17, 2019 at 03:32:56PM -0400, Stuart Hayes wrote:
>> Some systems have in-band presence detection disabled for hot-plug PCI
>> slots, but do not report this in the slot capabilities 2 (SLTCAP2) register.
>> On these systems, presence detect can become active well after the link is
>> reported to be active, which can cause the slots to be disabled after a
>> device is connected.
>>
>> Add a dmi table to flag these systems as having in-band presence disabled.
>>
>> Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
>> ---
>>  drivers/pci/hotplug/pciehp_hpc.c | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>>
>> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
>> index 02eb811a014f..4d377a2a62ce 100644
>> --- a/drivers/pci/hotplug/pciehp_hpc.c
>> +++ b/drivers/pci/hotplug/pciehp_hpc.c
>> @@ -14,6 +14,7 @@
>>  
>>  #define dev_fmt(fmt) "pciehp: " fmt
>>  
>> +#include <linux/dmi.h>
>>  #include <linux/kernel.h>
>>  #include <linux/types.h>
>>  #include <linux/jiffies.h>
>> @@ -26,6 +27,16 @@
>>  #include "../pci.h"
>>  #include "pciehp.h"
>>  
>> +static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
>> +	{
>> +		.ident = "Dell System",
>> +		.matches = {
>> +			DMI_MATCH(DMI_OEM_STRING, "Dell System"),
> 
> Sorry if this has been discussed previously already but isn't this going
> to apply on all Dell systems, not just the affected ones? Is this the
> intention?
> 

Yes, that is the intention. Applying this just makes the hotplug code wait for 
the presence detect bit to be set before proceeding, which ideally wouldn't hurt 
anything--for devices that don't have inband presence detect disabled, presence
detect should already be up when the code in patch 2/3 starts to wait for it.

The only issue should be with broken hotplug implementations that don't ever 
bring presence detect active (these apparently exist)--but even those would still 
work, they would just take an extra second to come up.

On the other hand, a number of Dell systems have (and will have) NVMe 
implementations that have inband presence detect disabled (but they won't have
the new bit implemented to report that), and they don't work correctly without 
this.
Alex G. Oct. 22, 2019, 12:13 a.m. UTC | #3
On 10/21/19 1:19 PM, Stuart Hayes wrote:
> 
> 
> On 10/21/19 8:47 AM, Mika Westerberg wrote:
>> On Thu, Oct 17, 2019 at 03:32:56PM -0400, Stuart Hayes wrote:
>>> Some systems have in-band presence detection disabled for hot-plug PCI
>>> slots, but do not report this in the slot capabilities 2 (SLTCAP2) register.
>>> On these systems, presence detect can become active well after the link is
>>> reported to be active, which can cause the slots to be disabled after a
>>> device is connected.
>>>
>>> Add a dmi table to flag these systems as having in-band presence disabled.
>>>
>>> Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
>>> ---
>>>   drivers/pci/hotplug/pciehp_hpc.c | 14 ++++++++++++++
>>>   1 file changed, 14 insertions(+)
>>>
>>> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
>>> index 02eb811a014f..4d377a2a62ce 100644
>>> --- a/drivers/pci/hotplug/pciehp_hpc.c
>>> +++ b/drivers/pci/hotplug/pciehp_hpc.c
>>> @@ -14,6 +14,7 @@
>>>   
>>>   #define dev_fmt(fmt) "pciehp: " fmt
>>>   
>>> +#include <linux/dmi.h>
>>>   #include <linux/kernel.h>
>>>   #include <linux/types.h>
>>>   #include <linux/jiffies.h>
>>> @@ -26,6 +27,16 @@
>>>   #include "../pci.h"
>>>   #include "pciehp.h"
>>>   
>>> +static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
>>> +	{
>>> +		.ident = "Dell System",
>>> +		.matches = {
>>> +			DMI_MATCH(DMI_OEM_STRING, "Dell System"),
>>
>> Sorry if this has been discussed previously already but isn't this going
>> to apply on all Dell systems, not just the affected ones? Is this the
>> intention?
>>
> 
> Yes, that is the intention. Applying this just makes the hotplug code wait for
> the presence detect bit to be set before proceeding, which ideally wouldn't hurt
> anything--for devices that don't have inband presence detect disabled, presence
> detect should already be up when the code in patch 2/3 starts to wait for it.
> 
> The only issue should be with broken hotplug implementations that don't ever
> bring presence detect active (these apparently exist)--but even those would still
> work, they would just take an extra second to come up.
> 
> On the other hand, a number of Dell systems have (and will have) NVMe
> implementations that have inband presence detect disabled (but they won't have
> the new bit implemented to report that), and they don't work correctly without
> this.

I think it's clearer if this is explained in a comment. That it doesn't 
break anything, and we're okay this applies to all hotplug ports, even 
those that are not in front of an NVMe backplane.

Alex
Mika Westerberg Oct. 22, 2019, 9:42 a.m. UTC | #4
On Mon, Oct 21, 2019 at 07:13:32PM -0500, Alex G. wrote:
> I think it's clearer if this is explained in a comment. That it doesn't
> break anything, and we're okay this applies to all hotplug ports, even those
> that are not in front of an NVMe backplane.

I agree.
diff mbox series

Patch

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 02eb811a014f..4d377a2a62ce 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -14,6 +14,7 @@ 
 
 #define dev_fmt(fmt) "pciehp: " fmt
 
+#include <linux/dmi.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/jiffies.h>
@@ -26,6 +27,16 @@ 
 #include "../pci.h"
 #include "pciehp.h"
 
+static const struct dmi_system_id inband_presence_disabled_dmi_table[] = {
+	{
+		.ident = "Dell System",
+		.matches = {
+			DMI_MATCH(DMI_OEM_STRING, "Dell System"),
+		},
+	},
+	{}
+};
+
 static inline struct pci_dev *ctrl_dev(struct controller *ctrl)
 {
 	return ctrl->pcie->port;
@@ -895,6 +906,9 @@  struct controller *pcie_init(struct pcie_device *dev)
 		ctrl->inband_presence_disabled = 1;
 	}
 
+	if (dmi_first_match(inband_presence_disabled_dmi_table))
+		ctrl->inband_presence_disabled = 1;
+
 	/*
 	 * If empty slot's power status is on, turn power off.  The IRQ isn't
 	 * requested yet, so avoid triggering a notification with this command.