| Message ID | 20191107001642.1127561-3-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Mainlined, archived |
| Commit | ed8cc3b1fc84f110336edaafaa203f65aa26b5e0 |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | PCI: qcom: Add support for SDM845 PCIe | expand |
On Wed, 2019-11-06 at 16:16 -0800, Bjorn Andersson wrote: > The SDM845 has one Gen2 and one Gen3 controller, add support for these. > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp
On 11/7/19 2:16 AM, Bjorn Andersson wrote: > The SDM845 has one Gen2 and one Gen3 controller, add support for these. > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes since v1: > - Don't assert the reset in the failure path > > drivers/pci/controller/dwc/pcie-qcom.c | 150 +++++++++++++++++++++++++ > 1 file changed, 150 insertions(+) Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
On Wed, Nov 06, 2019 at 04:16:42PM -0800, Bjorn Andersson wrote: > The SDM845 has one Gen2 and one Gen3 controller, add support for these. > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes since v1: > - Don't assert the reset in the failure path > > drivers/pci/controller/dwc/pcie-qcom.c | 150 +++++++++++++++++++++++++ > 1 file changed, 150 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 7e581748ee9f..5ea527a6bd9f 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -54,6 +54,7 @@ > #define PCIE20_PARF_LTSSM 0x1B0 > #define PCIE20_PARF_SID_OFFSET 0x234 > #define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C > +#define PCIE20_PARF_DEVICE_TYPE 0x1000 > > #define PCIE20_ELBI_SYS_CTRL 0x04 > #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0) > @@ -80,6 +81,8 @@ > #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 > #define SLV_ADDR_SPACE_SZ 0x10000000 > > +#define DEVICE_TYPE_RC 0x4 > + > #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 > struct qcom_pcie_resources_2_1_0 { > struct clk *iface_clk; > @@ -139,12 +142,20 @@ struct qcom_pcie_resources_2_3_3 { > struct reset_control *rst[7]; > }; > > +struct qcom_pcie_resources_2_7_0 { > + struct clk_bulk_data clks[6]; > + struct regulator_bulk_data supplies[2]; > + struct reset_control *pci_reset; > + struct clk *pipe_clk; > +}; > + > union qcom_pcie_resources { > struct qcom_pcie_resources_1_0_0 v1_0_0; > struct qcom_pcie_resources_2_1_0 v2_1_0; > struct qcom_pcie_resources_2_3_2 v2_3_2; > struct qcom_pcie_resources_2_3_3 v2_3_3; > struct qcom_pcie_resources_2_4_0 v2_4_0; > + struct qcom_pcie_resources_2_7_0 v2_7_0; > }; > > struct qcom_pcie; > @@ -1068,6 +1079,134 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) > return ret; > } > > +static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > + struct dw_pcie *pci = pcie->pci; > + struct device *dev = pci->dev; > + int ret; > + > + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); > + if (IS_ERR(res->pci_reset)) > + return PTR_ERR(res->pci_reset); > + > + res->supplies[0].supply = "vdda"; > + res->supplies[1].supply = "vddpe-3v3"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), > + res->supplies); > + if (ret) > + return ret; > + > + res->clks[0].id = "aux"; > + res->clks[1].id = "cfg"; > + res->clks[2].id = "bus_master"; > + res->clks[3].id = "bus_slave"; > + res->clks[4].id = "slave_q2a"; > + res->clks[5].id = "tbu"; > + > + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > + if (ret < 0) > + return ret; > + > + res->pipe_clk = devm_clk_get(dev, "pipe"); > + return PTR_ERR_OR_ZERO(res->pipe_clk); We tend to discourage people on the list from using PTR_ERR_OR_ZERO, however this usage is consistent with the rest of the file - so let's leave it. Reviewed-by: Andrew Murray <andrew.murray@arm.com> > +} > + > +static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > + struct dw_pcie *pci = pcie->pci; > + struct device *dev = pci->dev; > + u32 val; > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); > + if (ret < 0) { > + dev_err(dev, "cannot enable regulators\n"); > + return ret; > + } > + > + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > + if (ret < 0) > + goto err_disable_regulators; > + > + ret = reset_control_assert(res->pci_reset); > + if (ret < 0) { > + dev_err(dev, "cannot deassert pci reset\n"); > + goto err_disable_clocks; > + } > + > + usleep_range(1000, 1500); > + > + ret = reset_control_deassert(res->pci_reset); > + if (ret < 0) { > + dev_err(dev, "cannot deassert pci reset\n"); > + goto err_disable_clocks; > + } > + > + ret = clk_prepare_enable(res->pipe_clk); > + if (ret) { > + dev_err(dev, "cannot prepare/enable pipe clock\n"); > + goto err_disable_clocks; > + } > + > + /* configure PCIe to RC mode */ > + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); > + > + /* enable PCIe clocks and resets */ > + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); > + val &= ~BIT(0); > + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); > + > + /* change DBI base address */ > + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); > + > + /* MAC PHY_POWERDOWN MUX DISABLE */ > + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); > + val &= ~BIT(29); > + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); > + > + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); > + val |= BIT(4); > + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); > + > + if (IS_ENABLED(CONFIG_PCI_MSI)) { > + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); > + val |= BIT(31); > + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); > + } > + > + return 0; > +err_disable_clocks: > + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > +err_disable_regulators: > + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); > + > + return ret; > +} > + > +static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > + > + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); > +} > + > +static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > + > + return clk_prepare_enable(res->pipe_clk); > +} > + > +static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > + > + clk_disable_unprepare(res->pipe_clk); > +} > + > static int qcom_pcie_link_up(struct dw_pcie *pci) > { > u16 val = readw(pci->dbi_base + PCIE20_CAP + PCI_EXP_LNKSTA); > @@ -1167,6 +1306,16 @@ static const struct qcom_pcie_ops ops_2_3_3 = { > .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > }; > > +/* Qcom IP rev.: 2.7.0 Synopsys IP rev.: 4.30a */ > +static const struct qcom_pcie_ops ops_2_7_0 = { > + .get_resources = qcom_pcie_get_resources_2_7_0, > + .init = qcom_pcie_init_2_7_0, > + .deinit = qcom_pcie_deinit_2_7_0, > + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, > + .post_init = qcom_pcie_post_init_2_7_0, > + .post_deinit = qcom_pcie_post_deinit_2_7_0, > +}; > + > static const struct dw_pcie_ops dw_pcie_ops = { > .link_up = qcom_pcie_link_up, > }; > @@ -1282,6 +1431,7 @@ static const struct of_device_id qcom_pcie_match[] = { > { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, > { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, > { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, > + { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, > { } > }; > > -- > 2.23.0 >
Hi, On 11/7/19 2:16 AM, Bjorn Andersson wrote: > The SDM845 has one Gen2 and one Gen3 controller, add support for these. > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes since v1: > - Don't assert the reset in the failure path > > drivers/pci/controller/dwc/pcie-qcom.c | 150 +++++++++++++++++++++++++ > 1 file changed, 150 insertions(+) I don't see my tag, so: Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
On Wed, 2019-11-06 at 16:16 -0800, Bjorn Andersson wrote: > The SDM845 has one Gen2 and one Gen3 controller, add support for these. > > Reviewed-by: Vinod Koul <vkoul@kernel.org> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > Changes since v1: > - Don't assert the reset in the failure path > > drivers/pci/controller/dwc/pcie-qcom.c | 150 +++++++++++++++++++++++++ > 1 file changed, 150 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 7e581748ee9f..5ea527a6bd9f 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c [...] > @@ -139,12 +142,20 @@ struct qcom_pcie_resources_2_3_3 { > struct reset_control *rst[7]; > }; > > +struct qcom_pcie_resources_2_7_0 { > + struct clk_bulk_data clks[6]; > + struct regulator_bulk_data supplies[2]; > + struct reset_control *pci_reset; > + struct clk *pipe_clk; > +}; > + > union qcom_pcie_resources { > struct qcom_pcie_resources_1_0_0 v1_0_0; > struct qcom_pcie_resources_2_1_0 v2_1_0; > struct qcom_pcie_resources_2_3_2 v2_3_2; > struct qcom_pcie_resources_2_3_3 v2_3_3; > struct qcom_pcie_resources_2_4_0 v2_4_0; > + struct qcom_pcie_resources_2_7_0 v2_7_0; > }; > > struct qcom_pcie; > @@ -1068,6 +1079,134 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) > return ret; > } > > +static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > + struct dw_pcie *pci = pcie->pci; > + struct device *dev = pci->dev; > + int ret; > + > + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); > + if (IS_ERR(res->pci_reset)) > + return PTR_ERR(res->pci_reset); > + > + res->supplies[0].supply = "vdda"; > + res->supplies[1].supply = "vddpe-3v3"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), > + res->supplies); > + if (ret) > + return ret; > + > + res->clks[0].id = "aux"; > + res->clks[1].id = "cfg"; > + res->clks[2].id = "bus_master"; > + res->clks[3].id = "bus_slave"; > + res->clks[4].id = "slave_q2a"; > + res->clks[5].id = "tbu"; > + > + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > + if (ret < 0) > + return ret; > + > + res->pipe_clk = devm_clk_get(dev, "pipe"); > + return PTR_ERR_OR_ZERO(res->pipe_clk); > +} > + > +static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) > +{ > + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > + struct dw_pcie *pci = pcie->pci; > + struct device *dev = pci->dev; > + u32 val; > + int ret; > + > + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); > + if (ret < 0) { > + dev_err(dev, "cannot enable regulators\n"); > + return ret; > + } > + > + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > + if (ret < 0) > + goto err_disable_regulators; > + > + ret = reset_control_assert(res->pci_reset); > + if (ret < 0) { > + dev_err(dev, "cannot deassert pci reset\n"); s/deassert/assert/ in the error message. Apart from that, Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> regards Philipp
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 7e581748ee9f..5ea527a6bd9f 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -54,6 +54,7 @@ #define PCIE20_PARF_LTSSM 0x1B0 #define PCIE20_PARF_SID_OFFSET 0x234 #define PCIE20_PARF_BDF_TRANSLATE_CFG 0x24C +#define PCIE20_PARF_DEVICE_TYPE 0x1000 #define PCIE20_ELBI_SYS_CTRL 0x04 #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0) @@ -80,6 +81,8 @@ #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 #define SLV_ADDR_SPACE_SZ 0x10000000 +#define DEVICE_TYPE_RC 0x4 + #define QCOM_PCIE_2_1_0_MAX_SUPPLY 3 struct qcom_pcie_resources_2_1_0 { struct clk *iface_clk; @@ -139,12 +142,20 @@ struct qcom_pcie_resources_2_3_3 { struct reset_control *rst[7]; }; +struct qcom_pcie_resources_2_7_0 { + struct clk_bulk_data clks[6]; + struct regulator_bulk_data supplies[2]; + struct reset_control *pci_reset; + struct clk *pipe_clk; +}; + union qcom_pcie_resources { struct qcom_pcie_resources_1_0_0 v1_0_0; struct qcom_pcie_resources_2_1_0 v2_1_0; struct qcom_pcie_resources_2_3_2 v2_3_2; struct qcom_pcie_resources_2_3_3 v2_3_3; struct qcom_pcie_resources_2_4_0 v2_4_0; + struct qcom_pcie_resources_2_7_0 v2_7_0; }; struct qcom_pcie; @@ -1068,6 +1079,134 @@ static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie) return ret; } +static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + int ret; + + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vddpe-3v3"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(res->supplies), + res->supplies); + if (ret) + return ret; + + res->clks[0].id = "aux"; + res->clks[1].id = "cfg"; + res->clks[2].id = "bus_master"; + res->clks[3].id = "bus_slave"; + res->clks[4].id = "slave_q2a"; + res->clks[5].id = "tbu"; + + ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); + if (ret < 0) + return ret; + + res->pipe_clk = devm_clk_get(dev, "pipe"); + return PTR_ERR_OR_ZERO(res->pipe_clk); +} + +static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; + u32 val; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(res->supplies), res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + + ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); + if (ret < 0) + goto err_disable_regulators; + + ret = reset_control_assert(res->pci_reset); + if (ret < 0) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_disable_clocks; + } + + usleep_range(1000, 1500); + + ret = reset_control_deassert(res->pci_reset); + if (ret < 0) { + dev_err(dev, "cannot deassert pci reset\n"); + goto err_disable_clocks; + } + + ret = clk_prepare_enable(res->pipe_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable pipe clock\n"); + goto err_disable_clocks; + } + + /* configure PCIe to RC mode */ + writel(DEVICE_TYPE_RC, pcie->parf + PCIE20_PARF_DEVICE_TYPE); + + /* enable PCIe clocks and resets */ + val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); + val &= ~BIT(0); + writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); + + /* change DBI base address */ + writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR); + + /* MAC PHY_POWERDOWN MUX DISABLE */ + val = readl(pcie->parf + PCIE20_PARF_SYS_CTRL); + val &= ~BIT(29); + writel(val, pcie->parf + PCIE20_PARF_SYS_CTRL); + + val = readl(pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + val |= BIT(4); + writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL); + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + val |= BIT(31); + writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT); + } + + return 0; +err_disable_clocks: + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); +err_disable_regulators: + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); + + return ret; +} + +static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + + clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); + regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); +} + +static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + + return clk_prepare_enable(res->pipe_clk); +} + +static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie) +{ + struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + + clk_disable_unprepare(res->pipe_clk); +} + static int qcom_pcie_link_up(struct dw_pcie *pci) { u16 val = readw(pci->dbi_base + PCIE20_CAP + PCI_EXP_LNKSTA); @@ -1167,6 +1306,16 @@ static const struct qcom_pcie_ops ops_2_3_3 = { .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, }; +/* Qcom IP rev.: 2.7.0 Synopsys IP rev.: 4.30a */ +static const struct qcom_pcie_ops ops_2_7_0 = { + .get_resources = qcom_pcie_get_resources_2_7_0, + .init = qcom_pcie_init_2_7_0, + .deinit = qcom_pcie_deinit_2_7_0, + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable, + .post_init = qcom_pcie_post_init_2_7_0, + .post_deinit = qcom_pcie_post_deinit_2_7_0, +}; + static const struct dw_pcie_ops dw_pcie_ops = { .link_up = qcom_pcie_link_up, }; @@ -1282,6 +1431,7 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, + { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, { } };