@@ -1020,6 +1020,47 @@ void pci_wakeup_bus(struct pci_bus *bus)
pci_walk_bus(bus, pci_wakeup, NULL);
}
+static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
+{
+ int delay = 1;
+ u32 id;
+
+ /*
+ * After reset, the device should not silently discard config
+ * requests, but it may still indicate that it needs more time by
+ * responding to them with CRS completions. The Root Port will
+ * generally synthesize ~0 data to complete the read (except when
+ * CRS SV is enabled and the read was for the Vendor ID; in that
+ * case it synthesizes 0x0001 data).
+ *
+ * Wait for the device to return a non-CRS completion. Read the
+ * Command register instead of Vendor ID so we don't have to
+ * contend with the CRS SV value.
+ */
+ pci_read_config_dword(dev, PCI_COMMAND, &id);
+ while (id == ~0) {
+ if (delay > timeout) {
+ pci_warn(dev, "not ready %dms after %s; giving up\n",
+ delay - 1, reset_type);
+ return -ENOTTY;
+ }
+
+ if (delay > 1000)
+ pci_info(dev, "not ready %dms after %s; waiting\n",
+ delay - 1, reset_type);
+
+ msleep(delay);
+ delay *= 2;
+ pci_read_config_dword(dev, PCI_COMMAND, &id);
+ }
+
+ if (delay > 1000)
+ pci_info(dev, "ready %dms after %s\n", delay - 1,
+ reset_type);
+
+ return 0;
+}
+
/**
* pci_power_up - Put the given device into D0
* @dev: PCI device to power up
@@ -4420,47 +4461,6 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
}
EXPORT_SYMBOL(pci_wait_for_pending_transaction);
-static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
-{
- int delay = 1;
- u32 id;
-
- /*
- * After reset, the device should not silently discard config
- * requests, but it may still indicate that it needs more time by
- * responding to them with CRS completions. The Root Port will
- * generally synthesize ~0 data to complete the read (except when
- * CRS SV is enabled and the read was for the Vendor ID; in that
- * case it synthesizes 0x0001 data).
- *
- * Wait for the device to return a non-CRS completion. Read the
- * Command register instead of Vendor ID so we don't have to
- * contend with the CRS SV value.
- */
- pci_read_config_dword(dev, PCI_COMMAND, &id);
- while (id == ~0) {
- if (delay > timeout) {
- pci_warn(dev, "not ready %dms after %s; giving up\n",
- delay - 1, reset_type);
- return -ENOTTY;
- }
-
- if (delay > 1000)
- pci_info(dev, "not ready %dms after %s; waiting\n",
- delay - 1, reset_type);
-
- msleep(delay);
- delay *= 2;
- pci_read_config_dword(dev, PCI_COMMAND, &id);
- }
-
- if (delay > 1000)
- pci_info(dev, "ready %dms after %s\n", delay - 1,
- reset_type);
-
- return 0;
-}
-
/**
* pcie_has_flr - check if a device supports function level resets
* @dev: device to check
Move the definition of pci_dev_wait() above pci_power_up() so that it can be called from the latter with no change in functionality. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> --- drivers/pci/pci.c | 82 +++++++++++++++++++++++------------------------ 1 file changed, 41 insertions(+), 41 deletions(-)