diff mbox series

[v5,2/6] ARM: dts: bcm2711: Enable PCIe controller

Message ID 20191216110113.30436-3-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Delegated to: Lorenzo Pieralisi
Headers show
Series Raspberry Pi 4 PCIe support | expand

Commit Message

Nicolas Saenz Julienne Dec. 16, 2019, 11:01 a.m. UTC
This enables bcm2711's PCIe bus, which is hardwired to a VIA
Technologies XHCI USB 3.0 controller.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

---

Changes since v4:
  - Rebase commit taking into account genet support series

Changes since v3:
  - Remove unwarranted comment

Changes since v2:
  - Remove unused interrupt-map
  - correct dma-ranges to it's full size, non power of 2 bus DMA
    constraints now supported in linux-next[1]
  - add device_type
  - rename alias from pcie_0 to pcie0

Changes since v1:
  - remove linux,pci-domain

[1] https://lkml.org/lkml/2019/11/21/235

 arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

Comments

Lorenzo Pieralisi Jan. 14, 2020, 6:11 p.m. UTC | #1
On Mon, Dec 16, 2019 at 12:01:08PM +0100, Nicolas Saenz Julienne wrote:
> This enables bcm2711's PCIe bus, which is hardwired to a VIA
> Technologies XHCI USB 3.0 controller.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> 
> ---
> 
> Changes since v4:
>   - Rebase commit taking into account genet support series
> 
> Changes since v3:
>   - Remove unwarranted comment
> 
> Changes since v2:
>   - Remove unused interrupt-map
>   - correct dma-ranges to it's full size, non power of 2 bus DMA
>     constraints now supported in linux-next[1]
>   - add device_type
>   - rename alias from pcie_0 to pcie0
> 
> Changes since v1:
>   - remove linux,pci-domain
> 
> [1] https://lkml.org/lkml/2019/11/21/235
> 
>  arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)

Olof as we discussed previously, I will not merge this dts change and
drop it from the series - Nicolas should redirect it to arm-soc, please
let me know if my understanding is correct.

Thanks,
Lorenzo

> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index e2f6ffb00aa9..b56388ce1216 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -331,7 +331,36 @@ scb {
>  		#address-cells = <2>;
>  		#size-cells = <1>;
>  
> -		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
> +		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
> +			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
> +
> +		pcie0: pcie@7d500000 {
> +			compatible = "brcm,bcm2711-pcie";
> +			reg = <0x0 0x7d500000 0x9310>;
> +			device_type = "pci";
> +			#address-cells = <3>;
> +			#interrupt-cells = <1>;
> +			#size-cells = <2>;
> +			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "pcie", "msi";
> +			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
> +							IRQ_TYPE_LEVEL_HIGH>;
> +			msi-controller;
> +			msi-parent = <&pcie0>;
> +
> +			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
> +				  0x0 0x04000000>;
> +			/*
> +			 * The wrapper around the PCIe block has a bug
> +			 * preventing it from accessing beyond the first 3GB of
> +			 * memory.
> +			 */
> +			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
> +				      0x0 0xc0000000>;
> +			brcm,enable-ssc;
> +		};
>  
>  		genet: ethernet@7d580000 {
>  			compatible = "brcm,bcm2711-genet-v5";
> -- 
> 2.24.0
>
Florian Fainelli Jan. 14, 2020, 6:15 p.m. UTC | #2
On 1/14/20 10:11 AM, Lorenzo Pieralisi wrote:
> On Mon, Dec 16, 2019 at 12:01:08PM +0100, Nicolas Saenz Julienne wrote:
>> This enables bcm2711's PCIe bus, which is hardwired to a VIA
>> Technologies XHCI USB 3.0 controller.
>>
>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>
>> ---
>>
>> Changes since v4:
>>   - Rebase commit taking into account genet support series
>>
>> Changes since v3:
>>   - Remove unwarranted comment
>>
>> Changes since v2:
>>   - Remove unused interrupt-map
>>   - correct dma-ranges to it's full size, non power of 2 bus DMA
>>     constraints now supported in linux-next[1]
>>   - add device_type
>>   - rename alias from pcie_0 to pcie0
>>
>> Changes since v1:
>>   - remove linux,pci-domain
>>
>> [1] https://lkml.org/lkml/2019/11/21/235
>>
>>  arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++-
>>  1 file changed, 30 insertions(+), 1 deletion(-)
> 
> Olof as we discussed previously, I will not merge this dts change and
> drop it from the series - Nicolas should redirect it to arm-soc, please
> let me know if my understanding is correct.

Correct, I will take patches 2, 5 and 6 through the Broadcom ARM SoC
pull requests and you will take 1, 3 and 4.
Florian Fainelli Jan. 15, 2020, 11:41 p.m. UTC | #3
On Mon, 16 Dec 2019 12:01:08 +0100, Nicolas Saenz Julienne <nsaenzjulienne@suse.de> wrote:
> This enables bcm2711's PCIe bus, which is hardwired to a VIA
> Technologies XHCI USB 3.0 controller.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> 
> ---

Applied to devicetree/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index e2f6ffb00aa9..b56388ce1216 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -331,7 +331,36 @@  scb {
 		#address-cells = <2>;
 		#size-cells = <1>;
 
-		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
 
 		genet: ethernet@7d580000 {
 			compatible = "brcm,bcm2711-genet-v5";