| Message ID | 20200123232943.10229-5-repk@triplefau.lt (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | PCI: amlogic: Make PCIe working reliably on AXG platforms | expand |
Add missing Reviewed/Acked-by from v5. On Fri, Jan 24, 2020 at 12:29:40AM +0100, Remi Pommarel wrote: > Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE > reliable on AXG SoC. > > Signed-off-by: Remi Pommarel <repk@triplefau.lt> > --- > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > index 04803c3bccfa..08a178aa0133 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi > @@ -12,6 +12,7 @@ > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> > #include <dt-bindings/reset/amlogic,meson-axg-reset.h> > +#include <dt-bindings/phy/phy.h> > > / { > compatible = "amlogic,meson-axg"; > @@ -1104,6 +1105,12 @@ hiubus: bus@ff63c000 { > #size-cells = <2>; > ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; > > + mipi_analog_phy: phy@0 { > + compatible = "amlogic,axg-mipi-pcie-analog-phy"; > + reg = <0x0 0x0 0x0 0xc>; > + #phy-cells = <1>; > + }; > + > sysctrl: system-controller@0 { > compatible = "amlogic,meson-axg-hhi-sysctrl", > "simple-mfd", "syscon"; > @@ -1356,6 +1363,15 @@ tdmout_c: audio-controller@580 { > }; > }; > > + pcie_phy: bus@ff644000 { > + compatible = "amlogic,axg-pcie-phy"; > + reg = <0x0 0xff644000 0x0 0x1c>; > + resets = <&reset RESET_PCIE_PHY>; > + phys = <&mipi_analog_phy PHY_TYPE_PCIE>; > + phy-names = "analog"; > + #phy-cells = <0>; > + }; > + > aobus: bus@ff800000 { > compatible = "simple-bus"; > reg = <0x0 0xff800000 0x0 0x100000>; Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 04803c3bccfa..08a178aa0133 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-axg-reset.h> +#include <dt-bindings/phy/phy.h> / { compatible = "amlogic,meson-axg"; @@ -1104,6 +1105,12 @@ hiubus: bus@ff63c000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + mipi_analog_phy: phy@0 { + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + reg = <0x0 0x0 0x0 0xc>; + #phy-cells = <1>; + }; + sysctrl: system-controller@0 { compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon"; @@ -1356,6 +1363,15 @@ tdmout_c: audio-controller@580 { }; }; + pcie_phy: bus@ff644000 { + compatible = "amlogic,axg-pcie-phy"; + reg = <0x0 0xff644000 0x0 0x1c>; + resets = <&reset RESET_PCIE_PHY>; + phys = <&mipi_analog_phy PHY_TYPE_PCIE>; + phy-names = "analog"; + #phy-cells = <0>; + }; + aobus: bus@ff800000 { compatible = "simple-bus"; reg = <0x0 0xff800000 0x0 0x100000>;
Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE reliable on AXG SoC. Signed-off-by: Remi Pommarel <repk@triplefau.lt> --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)