diff mbox series

[v2,04/17] PCI: Do not override delay for D0->D3hot transition

Message ID 20200302184429.12880-5-stanspas@amazon.com (mailing list archive)
State Superseded, archived
Headers show
Series Improve PCI device post-reset readiness polling | expand

Commit Message

Stanislav Spassov March 2, 2020, 6:44 p.m. UTC 
From: Stanislav Spassov <stanspas@amazon.de>

Both specifications that document mechanisms for overriding the
D3hot->D0 waiting time only speak of this specific direction.
Nothing is mentioned about the opposite (D*->D3hot) except for
the default value of 10ms in PCI Express Base Specification
r5.0 (May 22, 2019), Section 5.9 "State Transition Recovery Time
Requirements".

Signed-off-by: Stanislav Spassov <stanspas@amazon.de>
---
 drivers/pci/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index c1a866f733e9..03103bb15b42 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4589,7 +4589,7 @@  static int pci_pm_reset(struct pci_dev *dev, int probe)
 	csr &= ~PCI_PM_CTRL_STATE_MASK;
 	csr |= PCI_D3hot;
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, csr);
-	pci_dev_d3_sleep(dev);
+	msleep(PCI_PM_D3_WAIT);
 
 	csr &= ~PCI_PM_CTRL_STATE_MASK;
 	csr |= PCI_D0;