diff mbox series

[RFC,02/17] atm: Drop uses of pci_read_config_*() return value

Message ID 20200801112446.149549-3-refactormyself@gmail.com (mailing list archive)
State Not Applicable, archived
Delegated to: Bjorn Helgaas
Headers show
Series Drop uses of pci_read_config_*() return value | expand

Commit Message

Saheed O. Bolarinwa Aug. 1, 2020, 11:24 a.m. UTC
The return value of pci_read_config_*() may not indicate a device error.
However, the value read by these functions is more likely to indicate
this kind of error. This presents two overlapping ways of reporting
errors and complicates error checking.

It is possible to move to one single way of checking for error if the
dependency on the return value of these functions is removed, then it
can later be made to return void.

Remove all uses of the return value of pci_read_config_*().
Check the actual value read for ~0. In this case, ~0 is an invalid
value thus it indicates some kind of error.

Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
---
 drivers/atm/eni.c      |  3 ++-
 drivers/atm/he.c       | 12 +++++++----
 drivers/atm/idt77252.c |  9 ++++++---
 drivers/atm/iphase.c   | 46 +++++++++++++++++++++++-------------------
 drivers/atm/lanai.c    |  4 ++--
 drivers/atm/nicstar.c  |  3 ++-
 drivers/atm/zatm.c     |  9 +++++----
 7 files changed, 50 insertions(+), 36 deletions(-)
diff mbox series

Patch

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 17d47ad03ab7..5beed8a25fa2 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1585,7 +1585,8 @@  static char * const media_name[] = {
   } })
 #define GET_SEPROM \
   ({ if (!error && !pci_error) { \
-    pci_error = pci_read_config_byte(eni_dev->pci_dev,PCI_TONGA_CTRL,&tonga); \
+	pci_read_config_byte(eni_dev->pci_dev, PCI_TONGA_CTRL, &tonga); \
+	pci_error = (tonga == (u8)~0) ? -1 : 0; \
     udelay(10); /* 10 usecs */ \
   } })
 
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 8af793f5e811..8727ae7746fb 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -995,7 +995,8 @@  static int he_start(struct atm_dev *dev)
 	 */
 
 	/* 4.3 pci bus controller-specific initialization */
-	if (pci_read_config_dword(pci_dev, GEN_CNTL_0, &gen_cntl_0) != 0) {
+	pci_read_config_dword(pci_dev, GEN_CNTL_0, &gen_cntl_0);
+	if (gen_cntl_0 == (u32)~0) {
 		hprintk("can't read GEN_CNTL_0\n");
 		return -EINVAL;
 	}
@@ -1005,7 +1006,8 @@  static int he_start(struct atm_dev *dev)
 		return -EINVAL;
 	}
 
-	if (pci_read_config_word(pci_dev, PCI_COMMAND, &command) != 0) {
+	pci_read_config_word(pci_dev, PCI_COMMAND, &command);
+	if (command == (u16)~0) {
 		hprintk("can't read PCI_COMMAND.\n");
 		return -EINVAL;
 	}
@@ -1016,7 +1018,8 @@  static int he_start(struct atm_dev *dev)
 		return -EINVAL;
 	}
 
-	if (pci_read_config_byte(pci_dev, PCI_CACHE_LINE_SIZE, &cache_size)) {
+	pci_read_config_byte(pci_dev, PCI_CACHE_LINE_SIZE, &cache_size);
+	if (cache_size == (u8)~0) {
 		hprintk("can't read cache line size?\n");
 		return -EINVAL;
 	}
@@ -1027,7 +1030,8 @@  static int he_start(struct atm_dev *dev)
 			hprintk("can't set cache line size to %d\n", cache_size);
 	}
 
-	if (pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &timer)) {
+	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &timer);
+	if (timer == (u8)~0) {
 		hprintk("can't read latency timer?\n");
 		return -EINVAL;
 	}
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index df51680e8931..f4b0c2ecae62 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3271,7 +3271,8 @@  static int init_card(struct atm_dev *dev)
 
 	/* Set PCI Retry-Timeout and TRDY timeout */
 	IPRINTK("%s: Checking PCI retries.\n", card->name);
-	if (pci_read_config_byte(pcidev, 0x40, &pci_byte) != 0) {
+	pci_read_config_byte(pcidev, 0x40, &pci_byte);
+	if (pci_byte == (u_char)~0) {
 		printk("%s: can't read PCI retry timeout.\n", card->name);
 		deinit_card(card);
 		return -1;
@@ -3287,7 +3288,8 @@  static int init_card(struct atm_dev *dev)
 		}
 	}
 	IPRINTK("%s: Checking PCI TRDY.\n", card->name);
-	if (pci_read_config_byte(pcidev, 0x41, &pci_byte) != 0) {
+	pci_read_config_byte(pcidev, 0x41, &pci_byte);
+	if (pci_byte == (u_char)~0) {
 		printk("%s: can't read PCI TRDY timeout.\n", card->name);
 		deinit_card(card);
 		return -1;
@@ -3535,7 +3537,8 @@  static int idt77252_preset(struct idt77252_dev *card)
 
 	XPRINTK("%s: Enable PCI master and memory access for SAR.\n",
 		card->name);
-	if (pci_read_config_word(card->pcidev, PCI_COMMAND, &pci_command)) {
+	pci_read_config_word(card->pcidev, PCI_COMMAND, &pci_command);
+	if (pci_command == (u16)~0) {
 		printk("%s: can't read PCI_COMMAND.\n", card->name);
 		deinit_card(card);
 		return -1;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 8c7a996d1f16..d3f2fac3a7d1 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2287,25 +2287,29 @@  static int get_esi(struct atm_dev *dev)
 	return 0;  
 }  
 	  
-static int reset_sar(struct atm_dev *dev)  
-{  
-	IADEV *iadev;  
-	int i, error = 1;  
-	unsigned int pci[64];  
-	  
-	iadev = INPH_IA_DEV(dev);  
-	for(i=0; i<64; i++)  
-	  if ((error = pci_read_config_dword(iadev->pci,  
-				i*4, &pci[i])) != PCIBIOS_SUCCESSFUL)  
-  	      return error;  
-	writel(0, iadev->reg+IPHASE5575_EXT_RESET);  
-	for(i=0; i<64; i++)  
-	  if ((error = pci_write_config_dword(iadev->pci,  
-					i*4, pci[i])) != PCIBIOS_SUCCESSFUL)  
-	    return error;  
-	udelay(5);  
-	return 0;  
-}  
+static int reset_sar(struct atm_dev *dev)
+{
+	IADEV *iadev;
+	int i, error = 1;
+	unsigned int pci[64];
+
+	iadev = INPH_IA_DEV(dev);
+	for (i = 0; i < 64; i++) {
+		pci_read_config_dword(iadev->pci, i*4, &pci[i]);
+		if (pci[i] == (u32)~0)
+			return error;
+	}
+
+	writel(0, iadev->reg+IPHASE5575_EXT_RESET);
+	for (i = 0; i < 64; i++) {
+		error = pci_write_config_dword(iadev->pci, i*4, pci[i]);
+		if (error != PCIBIOS_SUCCESSFUL)
+			return error;
+	}
+
+	udelay(5);
+	return 0;
+}
 	  
 	  
 static int ia_init(struct atm_dev *dev)
@@ -2328,8 +2332,8 @@  static int ia_init(struct atm_dev *dev)
 	real_base = pci_resource_start (iadev->pci, 0);
 	iadev->irq = iadev->pci->irq;
 		  
-	error = pci_read_config_word(iadev->pci, PCI_COMMAND, &command);
-	if (error) {
+	pci_read_config_word(iadev->pci, PCI_COMMAND, &command);
+	if (command == (u16)~0) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n",  
 				dev->number,error);  
 		return -EINVAL;  
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 645a6bc1df88..aafe1f934385 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1097,8 +1097,8 @@  static void pcistatus_check(struct lanai_dev *lanai, int clearonly)
 {
 	u16 s;
 	int result;
-	result = pci_read_config_word(lanai->pci, PCI_STATUS, &s);
-	if (result != PCIBIOS_SUCCESSFUL) {
+	pci_read_config_word(lanai->pci, PCI_STATUS, &s);
+	if (s == (u16)~0) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
 		    "%d\n", lanai->number, result);
 		return;
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 7af74fb450a0..74f49f54e024 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -399,7 +399,8 @@  static int ns_init_card(int i, struct pci_dev *pcidev)
 
 	pci_set_master(pcidev);
 
-	if (pci_read_config_byte(pcidev, PCI_LATENCY_TIMER, &pci_latency) != 0) {
+	pci_read_config_byte(pcidev, PCI_LATENCY_TIMER, &pci_latency);
+	if (pci_latency == (u8)~0) {
 		printk("nicstar%d: can't read PCI latency timer.\n", i);
 		error = 6;
 		ns_init_card_error(card, error);
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 57f97b95a453..8106ee20a94c 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1112,11 +1112,11 @@  static void eprom_set(struct zatm_dev *zatm_dev, unsigned long value,
 static unsigned long eprom_get(struct zatm_dev *zatm_dev, unsigned short cmd)
 {
 	unsigned int value;
-	int error;
 
-	if ((error = pci_read_config_dword(zatm_dev->pci_dev,cmd,&value)))
+	pci_read_config_dword(zatm_dev->pci_dev, cmd, &value);
+	if (value == (u64)~0)
 		printk(KERN_ERR DEV_LABEL ": PCI read failed (0x%02x)\n",
-		    error);
+		    value);
 	return value;
 }
 
@@ -1197,7 +1197,8 @@  static int zatm_init(struct atm_dev *dev)
 	pci_dev = zatm_dev->pci_dev;
 	zatm_dev->base = pci_resource_start(pci_dev, 0);
 	zatm_dev->irq = pci_dev->irq;
-	if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) {
+	pci_read_config_word(pci_dev, PCI_COMMAND, &command);
+	if (command == (u16)~0) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
 		    dev->number,error);
 		return -EINVAL;