@@ -673,6 +673,50 @@ int tb_port_unlock(struct tb_port *port)
return 0;
}
+static int __tb_port_enable(struct tb_port *port, bool enable)
+{
+ int ret;
+ u32 phy;
+
+ if (!tb_port_is_null(port))
+ return -EINVAL;
+
+ ret = tb_port_read(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+ if (ret)
+ return ret;
+
+ if (enable)
+ phy &= ~LANE_ADP_CS_1_LD;
+ else
+ phy |= LANE_ADP_CS_1_LD;
+
+ return tb_port_write(port, &phy, TB_CFG_PORT,
+ port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+/**
+ * tb_port_enable() - Enable lane adapter
+ * @port: Port to enable (can be %NULL)
+ *
+ * This is used for lane 0 and 1 adapters to enable it.
+ */
+int tb_port_enable(struct tb_port *port)
+{
+ return __tb_port_enable(port, true);
+}
+
+/**
+ * tb_port_disable() - Disable lane adapter
+ * @port: Port to disable (can be %NULL)
+ *
+ * This is used for lane 0 and 1 adapters to disable it.
+ */
+int tb_port_disable(struct tb_port *port)
+{
+ return __tb_port_enable(port, false);
+}
+
/**
* tb_init_port() - initialize a port
*
@@ -142,6 +142,12 @@ static void tb_discover_tunnels(struct tb_switch *sw)
static int tb_port_configure_xdomain(struct tb_port *port)
{
+ /*
+ * XDomain paths currently only support single lane so we must
+ * disable the other lane according to USB4 spec.
+ */
+ tb_port_disable(port->dual_link_port);
+
if (tb_switch_is_usb4(port->sw))
return usb4_port_configure_xdomain(port);
return tb_lc_configure_xdomain(port);
@@ -153,6 +159,8 @@ static void tb_port_unconfigure_xdomain(struct tb_port *port)
usb4_port_unconfigure_xdomain(port);
else
tb_lc_unconfigure_xdomain(port);
+
+ tb_port_enable(port->dual_link_port);
}
static void tb_scan_xdomain(struct tb_port *port)
@@ -790,6 +790,8 @@ int tb_port_add_nfc_credits(struct tb_port *port, int credits);
int tb_port_set_initial_credits(struct tb_port *port, u32 credits);
int tb_port_clear_counter(struct tb_port *port, int counter);
int tb_port_unlock(struct tb_port *port);
+int tb_port_enable(struct tb_port *port);
+int tb_port_disable(struct tb_port *port);
int tb_port_alloc_in_hopid(struct tb_port *port, int hopid, int max_hopid);
void tb_port_release_in_hopid(struct tb_port *port, int hopid);
int tb_port_alloc_out_hopid(struct tb_port *port, int hopid, int max_hopid);
@@ -279,6 +279,7 @@ struct tb_regs_port_header {
#define LANE_ADP_CS_1_TARGET_WIDTH_SHIFT 4
#define LANE_ADP_CS_1_TARGET_WIDTH_SINGLE 0x1
#define LANE_ADP_CS_1_TARGET_WIDTH_DUAL 0x3
+#define LANE_ADP_CS_1_LD BIT(14)
#define LANE_ADP_CS_1_LB BIT(15)
#define LANE_ADP_CS_1_CURRENT_SPEED_MASK GENMASK(19, 16)
#define LANE_ADP_CS_1_CURRENT_SPEED_SHIFT 16
USB4 spec mandates that the lane 1 should be disabled if lanes are not bonded. For host-to-host connections (XDomain) we don't support lane bonding so in order to be compatible with the spec, disable lane 1 when another host is connected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- drivers/thunderbolt/switch.c | 44 +++++++++++++++++++++++++++++++++++ drivers/thunderbolt/tb.c | 8 +++++++ drivers/thunderbolt/tb.h | 2 ++ drivers/thunderbolt/tb_regs.h | 1 + 4 files changed, 55 insertions(+)