@@ -2679,23 +2679,40 @@ int tb_switch_resume(struct tb_switch *sw)
return 0;
}
-void tb_switch_suspend(struct tb_switch *sw)
+/**
+ * tb_switch_suspend() - Put a switch to sleep
+ * @sw: Switch to suspend
+ * @runtime: Is this runtime suspend or system sleep
+ *
+ * Suspends router and all its children. Enables wakes according to
+ * value of @runtime and then sets sleep bit for the router. If @sw is
+ * host router the domain is ready to go to sleep once this function
+ * returns.
+ */
+void tb_switch_suspend(struct tb_switch *sw, bool runtime)
{
unsigned int flags = 0;
struct tb_port *port;
int err;
+ tb_sw_dbg(sw, "suspending switch\n");
+
err = tb_plug_events_active(sw, false);
if (err)
return;
tb_switch_for_each_port(sw, port) {
if (tb_port_has_remote(port))
- tb_switch_suspend(port->remote->sw);
+ tb_switch_suspend(port->remote->sw, runtime);
}
- if (device_may_wakeup(&sw->dev))
- flags = TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE;
+ if (runtime) {
+ /* Trigger wake when something is plugged in/out */
+ flags |= TB_WAKE_ON_CONNECT | TB_WAKE_ON_DISCONNECT;
+ flags |= TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE;
+ } else if (device_may_wakeup(&sw->dev)) {
+ flags |= TB_WAKE_ON_USB4 | TB_WAKE_ON_USB3 | TB_WAKE_ON_PCIE;
+ }
tb_switch_set_wake(sw, flags);
@@ -9,6 +9,7 @@
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
+#include <linux/pm_runtime.h>
#include "tb.h"
#include "tb_regs.h"
@@ -22,13 +23,21 @@
* events and exit if this is not set (it needs to
* acquire the lock one more time). Used to drain wq
* after cfg has been paused.
+ * @remove_work: Work used to remove any unplugged routers after
+ * runtime resume
*/
struct tb_cm {
struct list_head tunnel_list;
struct list_head dp_resources;
bool hotplug_active;
+ struct delayed_work remove_work;
};
+static inline struct tb *tcm_to_tb(struct tb_cm *tcm)
+{
+ return ((void *)tcm - sizeof(struct tb));
+}
+
struct tb_hotplug_event {
struct work_struct work;
struct tb *tb;
@@ -526,8 +535,13 @@ static void tb_scan_switch(struct tb_switch *sw)
{
struct tb_port *port;
+ pm_runtime_get_sync(&sw->dev);
+
tb_switch_for_each_port(sw, port)
tb_scan_port(port);
+
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
}
/**
@@ -602,6 +616,12 @@ static void tb_scan_port(struct tb_port *port)
if (!tcm->hotplug_active)
dev_set_uevent_suppress(&sw->dev, true);
+ /*
+ * At the moment Thunderbolt 2 and beyond (devices with LC) we
+ * can support runtime PM.
+ */
+ sw->rpm = sw->generation > 1;
+
if (tb_switch_add(sw)) {
tb_switch_put(sw);
return;
@@ -662,6 +682,11 @@ static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel)
* deallocated properly.
*/
tb_switch_dealloc_dp_resource(src_port->sw, src_port);
+ /* Now we can allow the domain to runtime suspend again */
+ pm_runtime_mark_last_busy(&dst_port->sw->dev);
+ pm_runtime_put_autosuspend(&dst_port->sw->dev);
+ pm_runtime_mark_last_busy(&src_port->sw->dev);
+ pm_runtime_put_autosuspend(&src_port->sw->dev);
fallthrough;
case TB_TUNNEL_USB3:
@@ -848,9 +873,20 @@ static void tb_tunnel_dp(struct tb *tb)
return;
}
+ /*
+ * DP stream needs the domain to be active so runtime resume
+ * both ends of the tunnel.
+ *
+ * This should bring the routers in the middle active as well
+ * and keeps the domain from runtime suspending while the DP
+ * tunnel is active.
+ */
+ pm_runtime_get_sync(&in->sw->dev);
+ pm_runtime_get_sync(&out->sw->dev);
+
if (tb_switch_alloc_dp_resource(in->sw, in)) {
tb_port_dbg(in, "no resource available for DP IN, not tunneling\n");
- return;
+ goto err_rpm_put;
}
/* Make all unused USB3 bandwidth available for the new DP tunnel */
@@ -889,6 +925,11 @@ static void tb_tunnel_dp(struct tb *tb)
tb_reclaim_usb3_bandwidth(tb, in, out);
err_dealloc_dp:
tb_switch_dealloc_dp_resource(in->sw, in);
+err_rpm_put:
+ pm_runtime_mark_last_busy(&out->sw->dev);
+ pm_runtime_put_autosuspend(&out->sw->dev);
+ pm_runtime_mark_last_busy(&in->sw->dev);
+ pm_runtime_put_autosuspend(&in->sw->dev);
}
static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port)
@@ -1073,6 +1114,9 @@ static void tb_handle_hotplug(struct work_struct *work)
struct tb_switch *sw;
struct tb_port *port;
+ /* Bring the domain back from sleep if it was suspended */
+ pm_runtime_get_sync(&tb->dev);
+
mutex_lock(&tb->lock);
if (!tcm->hotplug_active)
goto out; /* during init, suspend or shutdown */
@@ -1096,6 +1140,9 @@ static void tb_handle_hotplug(struct work_struct *work)
ev->route, ev->port, ev->unplug);
goto put_sw;
}
+
+ pm_runtime_get_sync(&sw->dev);
+
if (ev->unplug) {
tb_retimer_remove_all(port);
@@ -1149,10 +1196,17 @@ static void tb_handle_hotplug(struct work_struct *work)
}
}
+ pm_runtime_mark_last_busy(&sw->dev);
+ pm_runtime_put_autosuspend(&sw->dev);
+
put_sw:
tb_switch_put(sw);
out:
mutex_unlock(&tb->lock);
+
+ pm_runtime_mark_last_busy(&tb->dev);
+ pm_runtime_put_autosuspend(&tb->dev);
+
kfree(ev);
}
@@ -1188,6 +1242,7 @@ static void tb_stop(struct tb *tb)
struct tb_tunnel *tunnel;
struct tb_tunnel *n;
+ cancel_delayed_work(&tcm->remove_work);
/* tunnels are only present after everything has been initialized */
list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) {
/*
@@ -1239,6 +1294,8 @@ static int tb_start(struct tb *tb)
* root switch.
*/
tb->root_switch->no_nvm_upgrade = true;
+ /* All USB4 routers support runtime PM */
+ tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch);
ret = tb_switch_configure(tb->root_switch);
if (ret) {
@@ -1281,7 +1338,7 @@ static int tb_suspend_noirq(struct tb *tb)
tb_dbg(tb, "suspending...\n");
tb_disconnect_and_release_dp(tb);
- tb_switch_suspend(tb->root_switch);
+ tb_switch_suspend(tb->root_switch, false);
tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */
tb_dbg(tb, "suspend finished\n");
@@ -1292,6 +1349,10 @@ static void tb_restore_children(struct tb_switch *sw)
{
struct tb_port *port;
+ /* No need to restore if the router is already unplugged */
+ if (sw->is_unplugged)
+ return;
+
if (tb_enable_tmu(sw))
tb_sw_warn(sw, "failed to restore TMU configuration\n");
@@ -1376,12 +1437,62 @@ static void tb_complete(struct tb *tb)
mutex_unlock(&tb->lock);
}
+static int tb_runtime_suspend(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+
+ mutex_lock(&tb->lock);
+ tb_switch_suspend(tb->root_switch, true);
+ tcm->hotplug_active = false;
+ mutex_unlock(&tb->lock);
+
+ return 0;
+}
+
+static void tb_remove_work(struct work_struct *work)
+{
+ struct tb_cm *tcm = container_of(work, struct tb_cm, remove_work.work);
+ struct tb *tb = tcm_to_tb(tcm);
+
+ mutex_lock(&tb->lock);
+ if (tb->root_switch) {
+ tb_free_unplugged_children(tb->root_switch);
+ tb_free_unplugged_xdomains(tb->root_switch);
+ }
+ mutex_unlock(&tb->lock);
+}
+
+static int tb_runtime_resume(struct tb *tb)
+{
+ struct tb_cm *tcm = tb_priv(tb);
+ struct tb_tunnel *tunnel, *n;
+
+ mutex_lock(&tb->lock);
+ tb_switch_resume(tb->root_switch);
+ tb_free_invalid_tunnels(tb);
+ tb_restore_children(tb->root_switch);
+ list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list)
+ tb_tunnel_restart(tunnel);
+ tcm->hotplug_active = true;
+ mutex_unlock(&tb->lock);
+
+ /*
+ * Schedule cleanup of any unplugged devices. Run this in a
+ * separate thread to avoid possible deadlock if the device
+ * removal runtime resumes the unplugged device.
+ */
+ queue_delayed_work(tb->wq, &tcm->remove_work, msecs_to_jiffies(50));
+ return 0;
+}
+
static const struct tb_cm_ops tb_cm_ops = {
.start = tb_start,
.stop = tb_stop,
.suspend_noirq = tb_suspend_noirq,
.resume_noirq = tb_resume_noirq,
.complete = tb_complete,
+ .runtime_suspend = tb_runtime_suspend,
+ .runtime_resume = tb_runtime_resume,
.handle_event = tb_handle_event,
.approve_switch = tb_tunnel_pci,
.approve_xdomain_paths = tb_approve_xdomain_paths,
@@ -1403,6 +1514,7 @@ struct tb *tb_probe(struct tb_nhi *nhi)
tcm = tb_priv(tb);
INIT_LIST_HEAD(&tcm->tunnel_list);
INIT_LIST_HEAD(&tcm->dp_resources);
+ INIT_DELAYED_WORK(&tcm->remove_work, tb_remove_work);
return tb;
}
@@ -639,7 +639,7 @@ struct tb_switch *tb_switch_alloc_safe_mode(struct tb *tb,
int tb_switch_configure(struct tb_switch *sw);
int tb_switch_add(struct tb_switch *sw);
void tb_switch_remove(struct tb_switch *sw);
-void tb_switch_suspend(struct tb_switch *sw);
+void tb_switch_suspend(struct tb_switch *sw, bool runtime);
int tb_switch_resume(struct tb_switch *sw);
int tb_switch_reset(struct tb_switch *sw);
void tb_sw_set_unplugged(struct tb_switch *sw);
This adds runtime PM support for the Software Connection Manager parts of the driver. This allows to save power when either there is no device attached at all or there is a device attached and all following conditions are true: - Tunneled PCIe root/downstream ports are runtime suspended - Tunneled USB3 ports are runtime suspended - No active DisplayPort stream - No active XDomain connection For the first two we take advantage of device links that were added in previous patch. Difference for the system sleep case is that we also enable wakes when something is geting plugged in/out of the Thunderbolt ports. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> --- drivers/thunderbolt/switch.c | 25 ++++++-- drivers/thunderbolt/tb.c | 116 ++++++++++++++++++++++++++++++++++- drivers/thunderbolt/tb.h | 2 +- 3 files changed, 136 insertions(+), 7 deletions(-)