diff mbox series

[v3,1/3] dt-bindings: pci: Add DT binding for Toshiba Visconti PCIe controller

Message ID 20210524063004.132043-2-nobuhiro1.iwamatsu@toshiba.co.jp (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series Visconti: Add Toshiba Visconti PCIe host controller driver | expand

Commit Message

Nobuhiro Iwamatsu May 24, 2021, 6:30 a.m. UTC
This commit adds the Device Tree binding documentation that allows
to describe the PCIe controller found in Toshiba Visconti SoCs.

v1 -> v2:
 - Remove white space.
 - Drop num-viewport and bus-range from required.
 - Drop status line from example.
 - Drop bus-range from required.
 - Removed lines defined in pci-bus.yaml from required.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 .../bindings/pci/toshiba,visconti-pcie.yaml   | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml

Comments

Rob Herring May 26, 2021, 4:33 p.m. UTC | #1
On Mon, May 24, 2021 at 1:30 AM Nobuhiro Iwamatsu
<nobuhiro1.iwamatsu@toshiba.co.jp> wrote:
>
> This commit adds the Device Tree binding documentation that allows
> to describe the PCIe controller found in Toshiba Visconti SoCs.
>
> v1 -> v2:
>  - Remove white space.
>  - Drop num-viewport and bus-range from required.
>  - Drop status line from example.
>  - Drop bus-range from required.
>  - Removed lines defined in pci-bus.yaml from required.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
>  .../bindings/pci/toshiba,visconti-pcie.yaml   | 110 ++++++++++++++++++
>  1 file changed, 110 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml

Please resend to DT list. Otherwise, automated checks don't run
(though I'm sure you ran 'make dt_binding_check' already, right?).

>
> diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
> new file mode 100644
> index 000000000000..d47a4a3c49e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings
> +
> +maintainers:
> +  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> +
> +description: |+
> +  Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +properties:
> +  compatible:
> +    const: toshiba,visconti-pcie
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: PCIe configuration space region.
> +      - description: Visconti specific additional registers.
> +      - description: Visconti specific SMU registers
> +      - description: Visconti specific memory protection unit registers (MPU)
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: config
> +      - const: ulreg
> +      - const: smu
> +      - const: mpu
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: PCIe reference clock
> +      - description: PCIe system clock
> +      - description: Auxiliary clock
> +
> +  clock-names:
> +    items:
> +      - const: pcie_refclk

Just 'refclk'. Though 'clk' is redundant too. I'd go with 'ref',
'aux', and 'core'.

> +      - const: sysclk
> +      - const: auxclk
> +
> +  num-lanes:
> +    const: 2
> +
> +required:
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - "#interrupt-cells"
> +  - interrupt-map
> +  - interrupt-map-mask
> +  - num-lanes
> +  - clocks
> +  - clock-names
> +  - max-link-speed
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie: pcie@28400000 {
> +            compatible = "toshiba,visconti-pcie";
> +            reg = <0x0 0x28400000 0x0 0x00400000>,
> +                  <0x0 0x70000000 0x0 0x10000000>,
> +                  <0x0 0x28050000 0x0 0x00010000>,
> +                  <0x0 0x24200000 0x0 0x00002000>,
> +                  <0x0 0x24162000 0x0 0x00001000>;
> +            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
> +            device_type = "pci";
> +            bus-range = <0x00 0xff>;
> +            num-lanes = <2>;
> +            num-viewport = <8>;
> +
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            #interrupt-cells = <1>;
> +            ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
> +                     <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
> +            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "intr";
> +            interrupt-map-mask = <0 0 0 7>;
> +            interrupt-map =
> +                <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
> +                 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
> +                 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
> +                 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
> +            clock-names = "pcie_refclk", "sysclk", "auxclk";
> +            max-link-speed = <2>;
> +        };
> +    };
> +...
> --
> 2.31.1
>
Nobuhiro Iwamatsu May 27, 2021, 12:22 a.m. UTC | #2
On Wed, May 26, 2021 at 11:33:35AM -0500, Rob Herring wrote:
> On Mon, May 24, 2021 at 1:30 AM Nobuhiro Iwamatsu
> <nobuhiro1.iwamatsu@toshiba.co.jp> wrote:
> >
> > This commit adds the Device Tree binding documentation that allows
> > to describe the PCIe controller found in Toshiba Visconti SoCs.
> >
> > v1 -> v2:
> >  - Remove white space.
> >  - Drop num-viewport and bus-range from required.
> >  - Drop status line from example.
> >  - Drop bus-range from required.
> >  - Removed lines defined in pci-bus.yaml from required.
> >
> > Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> > ---
> >  .../bindings/pci/toshiba,visconti-pcie.yaml   | 110 ++++++++++++++++++
> >  1 file changed, 110 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
> 
> Please resend to DT list. Otherwise, automated checks don't run
OK, I will resent to DT list.
> (though I'm sure you ran 'make dt_binding_check' already, right?).

Yes, I ran it enerytime.


> >
> > diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
> > new file mode 100644
> > index 000000000000..d47a4a3c49e3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> > +
> > +description: |+
> > +  Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
> > +
> > +allOf:
> > +  - $ref: /schemas/pci/pci-bus.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: toshiba,visconti-pcie
> > +
> > +  reg:
> > +    items:
> > +      - description: Data Bus Interface (DBI) registers.
> > +      - description: PCIe configuration space region.
> > +      - description: Visconti specific additional registers.
> > +      - description: Visconti specific SMU registers
> > +      - description: Visconti specific memory protection unit registers (MPU)
> > +
> > +  reg-names:
> > +    items:
> > +      - const: dbi
> > +      - const: config
> > +      - const: ulreg
> > +      - const: smu
> > +      - const: mpu
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: PCIe reference clock
> > +      - description: PCIe system clock
> > +      - description: Auxiliary clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: pcie_refclk
> 
> Just 'refclk'. Though 'clk' is redundant too. I'd go with 'ref',
> 'aux', and 'core'.
> 

Ok, I will update.

> > +      - const: sysclk
> > +      - const: auxclk
> > +
> > +  num-lanes:
> > +    const: 2
> > +
> > +required:
> > +  - reg
> > +  - reg-names
> > +  - interrupts
> > +  - "#interrupt-cells"
> > +  - interrupt-map
> > +  - interrupt-map-mask
> > +  - num-lanes
> > +  - clocks
> > +  - clock-names
> > +  - max-link-speed
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        pcie: pcie@28400000 {
> > +            compatible = "toshiba,visconti-pcie";
> > +            reg = <0x0 0x28400000 0x0 0x00400000>,
> > +                  <0x0 0x70000000 0x0 0x10000000>,
> > +                  <0x0 0x28050000 0x0 0x00010000>,
> > +                  <0x0 0x24200000 0x0 0x00002000>,
> > +                  <0x0 0x24162000 0x0 0x00001000>;
> > +            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
> > +            device_type = "pci";
> > +            bus-range = <0x00 0xff>;
> > +            num-lanes = <2>;
> > +            num-viewport = <8>;
> > +
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            #interrupt-cells = <1>;
> > +            ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
> > +                     <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
> > +            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
> > +            interrupt-names = "intr";
> > +            interrupt-map-mask = <0 0 0 7>;
> > +            interrupt-map =
> > +                <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
> > +                 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
> > +                 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
> > +                 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
> > +            clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
> > +            clock-names = "pcie_refclk", "sysclk", "auxclk";
> > +            max-link-speed = <2>;
> > +        };
> > +    };
> > +...
> > --
> > 2.31.1
> >
> 

Best regards,
  Nobuhiro
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
new file mode 100644
index 000000000000..d47a4a3c49e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -0,0 +1,110 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description: |+
+  Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: toshiba,visconti-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers.
+      - description: PCIe configuration space region.
+      - description: Visconti specific additional registers.
+      - description: Visconti specific SMU registers
+      - description: Visconti specific memory protection unit registers (MPU)
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: config
+      - const: ulreg
+      - const: smu
+      - const: mpu
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe reference clock
+      - description: PCIe system clock
+      - description: Auxiliary clock
+
+  clock-names:
+    items:
+      - const: pcie_refclk
+      - const: sysclk
+      - const: auxclk
+
+  num-lanes:
+    const: 2
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - num-lanes
+  - clocks
+  - clock-names
+  - max-link-speed
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@28400000 {
+            compatible = "toshiba,visconti-pcie";
+            reg = <0x0 0x28400000 0x0 0x00400000>,
+                  <0x0 0x70000000 0x0 0x10000000>,
+                  <0x0 0x28050000 0x0 0x00010000>,
+                  <0x0 0x24200000 0x0 0x00002000>,
+                  <0x0 0x24162000 0x0 0x00001000>;
+            reg-names  = "dbi", "config", "ulreg", "smu", "mpu";
+            device_type = "pci";
+            bus-range = <0x00 0xff>;
+            num-lanes = <2>;
+            num-viewport = <8>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
+                     <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
+            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "intr";
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map =
+                <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+                 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
+            clock-names = "pcie_refclk", "sysclk", "auxclk";
+            max-link-speed = <2>;
+        };
+    };
+...