diff mbox series

[2/5] PCI/switchtec: Fix a MRPC error status handling issue

Message ID 20210924110842.6323-3-kelvin.cao@microchip.com (mailing list archive)
State Superseded
Headers show
Series Switchtec Fixes and Improvements | expand

Commit Message

Kelvin Cao Sept. 24, 2021, 11:08 a.m. UTC 
From: Kelvin Cao <kelvin.cao@microchip.com>

If an error is encountered when executing a MRPC command, the firmware
will set the status register to SWITCHTEC_MRPC_STATUS_ERROR and return
the error code in the return value register.

Add handling of SWITCHTEC_MRPC_STATUS_ERROR on status register when
completing a MRPC command.

Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
---
 drivers/pci/switch/switchtec.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index 092653487021..76f14ed15445 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -230,7 +230,8 @@  static void mrpc_complete_cmd(struct switchtec_dev *stdev)
 	stuser_set_state(stuser, MRPC_DONE);
 	stuser->return_code = 0;
 
-	if (stuser->status != SWITCHTEC_MRPC_STATUS_DONE)
+	if (stuser->status != SWITCHTEC_MRPC_STATUS_DONE &&
+	    stuser->status != SWITCHTEC_MRPC_STATUS_ERROR)
 		goto out;
 
 	if (stdev->dma_mrpc)
@@ -614,7 +615,8 @@  static ssize_t switchtec_dev_read(struct file *filp, char __user *data,
 out:
 	mutex_unlock(&stdev->mrpc_mutex);
 
-	if (stuser->status == SWITCHTEC_MRPC_STATUS_DONE)
+	if (stuser->status == SWITCHTEC_MRPC_STATUS_DONE ||
+	    stuser->status == SWITCHTEC_MRPC_STATUS_ERROR)
 		return size;
 	else if (stuser->status == SWITCHTEC_MRPC_STATUS_INTERRUPTED)
 		return -ENXIO;