[10/11] arm64: dts: ls1028a-qds: add overlays for various serdes protocols

Message ID	20211112223457.10599-11-leoyang.li@nxp.com (mailing list archive)
State	New, archived
Delegated to:	Rob Herring
Headers	show Return-Path: <linux-pci-owner@kernel.org> From: Li Yang <leoyang.li@nxp.com> To: Bjorn Helgaas <bhelgaas@google.com>, Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Alex Marginean <alexandru.marginean@nxp.com>, Ioana Ciornei <ioana.ciornei@nxp.com>, Dong Aisheng <aisheng.dong@nxp.com>, Jason Liu <jason.hui.liu@nxp.com>, Vladimir Oltean <vladimir.oltean@nxp.com>, Li Yang <leoyang.li@nxp.com> Subject: [PATCH 10/11] arm64: dts: ls1028a-qds: add overlays for various serdes protocols Date: Fri, 12 Nov 2021 16:34:56 -0600 Message-Id: <20211112223457.10599-11-leoyang.li@nxp.com> In-Reply-To: <20211112223457.10599-1-leoyang.li@nxp.com> References: <20211112223457.10599-1-leoyang.li@nxp.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	ls1028a device tree updates \| expand [00/11] ls1028a device tree updates [01/11] dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028a [02/11] dt-bindings: pci: layerscape-pci: define aer/pme interrupts [03/11] arm64: dts: ls1028a: Add PCIe EP nodes [04/11] arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source [05/11] arm64: dts: ls1028a: add flextimer based pwm nodes [06/11] arm64: dts: ls1028a-rdb: reorder nodes to be alphabetic [07/11] arm64: dts: ls1028a-rdb: enable pwm0 [08/11] arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus [09/11] arm64: dts: ls1028a-qds: enable lpuart1 [10/11] arm64: dts: ls1028a-qds: add overlays for various serdes protocols [11/11] arm64: dts: ls1028a-qds: enable optee node

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index db9e36ebe932..ba453e7c9be0 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,4 +1,14 @@ # SPDX-License-Identifier: GPL-2.0 + +# required for overlay support +DTC_FLAGS_fsl-ls1028a-qds := -@ +DTC_FLAGS_fsl-ls1028a-qds-13bb := -@ +DTC_FLAGS_fsl-ls1028a-qds-65bb := -@ +DTC_FLAGS_fsl-ls1028a-qds-7777 := -@ +DTC_FLAGS_fsl-ls1028a-qds-85bb := -@ +DTC_FLAGS_fsl-ls1028a-qds-899b := -@ +DTC_FLAGS_fsl-ls1028a-qds-9999 := -@ + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb @@ -11,6 +21,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts new file mode 100644 index 000000000000..f748a2c12a70 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 13bb + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board with lane B rework. + * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C. + * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@2 { + /* AQR112 */ + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + + __overlay__ { + phy-handle = <&slot1_sgmii>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mdio_slot2>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on AQR412 */ + slot2_qxgmii0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii2: ethernet-phy@2 { + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot2_qxgmii3: ethernet-phy@3 { + reg = <0x3>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot2_qxgmii0>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot2_qxgmii1>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot2_qxgmii2>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot2_qxgmii3>; + phy-mode = "usxgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@4 { + target = <&mscc_felix>; + + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts new file mode 100644 index 000000000000..8ffb707a1576 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 69xx + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board with lane B rework. + * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@2 { + /* AQR112 */ + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + + __overlay__ { + phy-handle = <&slot1_sgmii>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mdio_slot2>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on VSC8514 */ + slot2_qsgmii0: ethernet-phy@8 { + reg = <0x8>; + }; + + slot2_qsgmii1: ethernet-phy@9 { + reg = <0x9>; + }; + + slot2_qsgmii2: ethernet-phy@a { + reg = <0xa>; + }; + + slot2_qsgmii3: ethernet-phy@b { + reg = <0xb>; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot2_qsgmii0>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot2_qsgmii1>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot2_qsgmii2>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot2_qsgmii3>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@4 { + target = <&mscc_felix>; + + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts new file mode 100644 index 000000000000..eb6a1e674f10 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 7777 + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board without lane B rework. + * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing + * disabled, plugged in slot 1. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on AQR412 */ + slot1_sxgmii0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot1_sxgmii1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot1_sxgmii2: ethernet-phy@2 { + reg = <0x2>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + slot1_sxgmii3: ethernet-phy@3 { + reg = <0x3>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + }; + + fragment@1 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot1_sxgmii0>; + phy-mode = "2500base-x"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot1_sxgmii1>; + phy-mode = "2500base-x"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot1_sxgmii2>; + phy-mode = "2500base-x"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot1_sxgmii3>; + phy-mode = "2500base-x"; + }; + }; + }; + + fragment@2 { + target = <&mscc_felix>; + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts new file mode 100644 index 000000000000..8e90c3088ba1 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 85bb + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board with lane B rework. + * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + slot1_sgmii: ethernet-phy@1c { + /* 1st port on VSC8234 */ + reg = <0x1c>; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + + __overlay__ { + phy-handle = <&slot1_sgmii>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mdio_slot2>; + + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* 4 ports on VSC8514 */ + slot2_qsgmii0: ethernet-phy@8 { + reg = <0x8>; + }; + + slot2_qsgmii1: ethernet-phy@9 { + reg = <0x9>; + }; + + slot2_qsgmii2: ethernet-phy@a { + reg = <0xa>; + }; + + slot2_qsgmii3: ethernet-phy@b { + reg = <0xb>; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix_ports>; + + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot2_qsgmii0>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot2_qsgmii1>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot2_qsgmii2>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot2_qsgmii3>; + phy-mode = "qsgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@4 { + target = <&mscc_felix>; + + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts new file mode 100644 index 000000000000..5d0a094e6c44 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 85xx + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board without lane B rework. + * Requires a SCH-24801 card in slot 1. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* VSC8234 */ + slot1_sgmii0: ethernet-phy@1c { + reg = <0x1c>; + }; + + slot1_sgmii1: ethernet-phy@1d { + reg = <0x1d>; + }; + + slot1_sgmii2: ethernet-phy@1e { + reg = <0x1e>; + }; + + slot1_sgmii3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + fragment@1 { + target = <&enetc_port0>; + __overlay__ { + phy-handle = <&slot1_sgmii0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "okay"; + }; + }; + + fragment@2 { + target = <&mscc_felix_ports>; + __overlay__ { + port@1 { + status = "okay"; + phy-handle = <&slot1_sgmii1>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot1_sgmii2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@3 { + target = <&mscc_felix>; + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts new file mode 100644 index 000000000000..1ef743c48e84 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree fragment for LS1028A QDS board, serdes 85xx + * + * Copyright 2019-2021 NXP + * + * Requires a LS1028A QDS board without lane B rework. + * Requires a SCH-24801 card in slot 1. + */ + +/dts-v1/; +/plugin/; + +/ { + fragment@0 { + target = <&mdio_slot1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <0>; + + /* VSC8234 */ + slot1_sgmii0: ethernet-phy@1c { + reg = <0x1c>; + }; + + slot1_sgmii1: ethernet-phy@1d { + reg = <0x1d>; + }; + + slot1_sgmii2: ethernet-phy@1e { + reg = <0x1e>; + }; + + slot1_sgmii3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + + fragment@1 { + target = <&mscc_felix_ports>; + __overlay__ { + port@0 { + status = "okay"; + phy-handle = <&slot1_sgmii0>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@1 { + status = "okay"; + phy-handle = <&slot1_sgmii1>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@2 { + status = "okay"; + phy-handle = <&slot1_sgmii2>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + + port@3 { + status = "okay"; + phy-handle = <&slot1_sgmii3>; + phy-mode = "sgmii"; + managed = "in-band-status"; + }; + }; + }; + + fragment@2 { + target = <&mscc_felix>; + __overlay__ { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 4e58a03a9985..0e2cc610d138 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -211,6 +211,16 @@ &duart1 { status = "okay"; }; +&enetc_port1 { + phy-handle = <&qds_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&enetc_port2 { + status = "okay"; +}; + &esdhc { status = "okay"; }; @@ -326,17 +336,16 @@ rtc@51 { }; }; -&enetc_port1 { - phy-handle = <&qds_phy1>; - phy-connection-type = "rgmii-id"; +&lpuart0 { status = "okay"; }; -&lpuart0 { +&lpuart1 { status = "okay"; }; -&lpuart1 { +&mscc_felix_port4 { + ethernet = <&enetc_port2>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index bdd36a2dcb98..ba12d2a75c3e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1080,7 +1080,7 @@ mscc_felix: ethernet-switch@0,5 { interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; - ports { + mscc_felix_ports: ports { #address-cells = <1>; #size-cells = <0>;

[10/11] arm64: dts: ls1028a-qds: add overlays for various serdes protocols

Commit Message

Patch