| Message ID | 20211208040432.3658355-2-f.fainelli@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Rob Herring |
| Headers | show |
| Series | Convert iProc PCIe binding to YAML | expand |
On Tue, Dec 7, 2021 at 10:04 PM Florian Fainelli <f.fainelli@gmail.com> wrote: > > Rename the msi controller unit name to 'msi' to avoid collisions > with the 'msi-controller' boolean property and add the missing > 'interrupt-controller' property which is necessary. We also need to 'interrupt-controller'part should be dropped... > re-arrange the 'ranges' property to show the two cells as being separate > instead of combined since the DT checker is not able to differentiate > otherwise. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > arch/arm/boot/dts/bcm-cygnus.dtsi | 13 +++++++------ > 1 file changed, 7 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi > index 8ecb7861ce10..d6e2b2ba3a19 100644 > --- a/arch/arm/boot/dts/bcm-cygnus.dtsi > +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi > @@ -274,8 +274,8 @@ pcie0: pcie@18012000 { > #address-cells = <3>; > #size-cells = <2>; > device_type = "pci"; > - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 > - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; > + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, > + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; > > phys = <&pcie0_phy>; > phy-names = "pcie-phy"; > @@ -283,7 +283,7 @@ pcie0: pcie@18012000 { > status = "disabled"; > > msi-parent = <&msi0>; > - msi0: msi-controller { > + msi0: msi { > compatible = "brcm,iproc-msi"; > msi-controller; > interrupt-parent = <&gic>; > @@ -298,6 +298,7 @@ pcie1: pcie@18013000 { > compatible = "brcm,iproc-pcie"; > reg = <0x18013000 0x1000>; > > + interrupt-controller; Missed dropping this? > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 0>; > interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; > @@ -309,8 +310,8 @@ pcie1: pcie@18013000 { > #address-cells = <3>; > #size-cells = <2>; > device_type = "pci"; > - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 > - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; > + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, > + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; > > phys = <&pcie1_phy>; > phy-names = "pcie-phy"; > @@ -318,7 +319,7 @@ pcie1: pcie@18013000 { > status = "disabled"; > > msi-parent = <&msi1>; > - msi1: msi-controller { > + msi1: msi { > compatible = "brcm,iproc-msi"; > msi-controller; > interrupt-parent = <&gic>; > -- > 2.25.1 >
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 8ecb7861ce10..d6e2b2ba3a19 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -274,8 +274,8 @@ pcie0: pcie@18012000 { #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000>, + <0x82000000 0 0x20000000 0x20000000 0 0x04000000>; phys = <&pcie0_phy>; phy-names = "pcie-phy"; @@ -283,7 +283,7 @@ pcie0: pcie@18012000 { status = "disabled"; msi-parent = <&msi0>; - msi0: msi-controller { + msi0: msi { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>; @@ -298,6 +298,7 @@ pcie1: pcie@18013000 { compatible = "brcm,iproc-pcie"; reg = <0x18013000 0x1000>; + interrupt-controller; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -309,8 +310,8 @@ pcie1: pcie@18013000 { #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000>, + <0x82000000 0 0x40000000 0x40000000 0 0x04000000>; phys = <&pcie1_phy>; phy-names = "pcie-phy"; @@ -318,7 +319,7 @@ pcie1: pcie@18013000 { status = "disabled"; msi-parent = <&msi1>; - msi1: msi-controller { + msi1: msi { compatible = "brcm,iproc-msi"; msi-controller; interrupt-parent = <&gic>;
Rename the msi controller unit name to 'msi' to avoid collisions with the 'msi-controller' boolean property and add the missing 'interrupt-controller' property which is necessary. We also need to re-arrange the 'ranges' property to show the two cells as being separate instead of combined since the DT checker is not able to differentiate otherwise. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- arch/arm/boot/dts/bcm-cygnus.dtsi | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)