diff mbox series

PCI: Correct misspelled words

Message ID 20220107225942.121484-1-kw@linux.com (mailing list archive)
State Accepted
Delegated to: Bjorn Helgaas
Headers show
Series PCI: Correct misspelled words | expand

Commit Message

Krzysztof Wilczyński Jan. 7, 2022, 10:59 p.m. UTC
Fix a number misspelled words, and while at it, correct two phrases used
to indicate a status of an operation where words used have been cleverly
truncated and thus always trigger a spellchecking error while performing
a static code analysis over the PCI tree.

Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
---
 drivers/pci/controller/cadence/pcie-cadence.h | 2 +-
 drivers/pci/controller/pcie-mediatek-gen3.c   | 2 +-
 drivers/pci/endpoint/functions/pci-epf-ntb.c  | 2 +-
 drivers/pci/of.c                              | 2 +-
 drivers/pci/quirks.c                          | 4 ++--
 5 files changed, 6 insertions(+), 6 deletions(-)

Comments

Bjorn Helgaas Jan. 8, 2022, 2:45 a.m. UTC | #1
On Fri, Jan 07, 2022 at 10:59:42PM +0000, Krzysztof Wilczyński wrote:
> Fix a number misspelled words, and while at it, correct two phrases used
> to indicate a status of an operation where words used have been cleverly
> truncated and thus always trigger a spellchecking error while performing
> a static code analysis over the PCI tree.
> 
> Signed-off-by: Krzysztof Wilczyński <kw@linux.com>

Applied to pci/misc, thanks!

> ---
>  drivers/pci/controller/cadence/pcie-cadence.h | 2 +-
>  drivers/pci/controller/pcie-mediatek-gen3.c   | 2 +-
>  drivers/pci/endpoint/functions/pci-epf-ntb.c  | 2 +-
>  drivers/pci/of.c                              | 2 +-
>  drivers/pci/quirks.c                          | 4 ++--
>  5 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
> index 262421e5d917..c8a27b6290ce 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence.h
> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
> @@ -310,7 +310,7 @@ struct cdns_pcie {
>   *            single function at a time
>   * @vendor_id: PCI vendor ID
>   * @device_id: PCI device ID
> - * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or
> + * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or
>   *                available
>   * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
>   * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> index 17c59b0d6978..7de82da0bd6d 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -303,7 +303,7 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
>  	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
>  
>  	/*
> -	 * Described in PCIe CEM specification setctions 2.2 (PERST# Signal)
> +	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal)
>  	 * and 2.2.1 (Initial Power-Up (G3 to S0)).
>  	 * The deassertion of PERST# should be delayed 100ms (TPVPERL)
>  	 * for the power and clock to become stable.
> diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> index 5a03401f4571..9a00448c7e61 100644
> --- a/drivers/pci/endpoint/functions/pci-epf-ntb.c
> +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c
> @@ -1262,7 +1262,7 @@ static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb,
>  }
>  
>  /**
> - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
>   * @ntb: NTB device that facilitates communication between HOST1 and HOST2
>   * @type: PRIMARY interface or SECONDARY interface
>   *
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index 0b1237cff239..cb2e8351c2cc 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -247,7 +247,7 @@ void of_pci_check_probe_only(void)
>  	else
>  		pci_clear_flags(PCI_PROBE_ONLY);
>  
> -	pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
> +	pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled");
>  }
>  EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
>  
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 003950c738d2..e16bde66e735 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -980,8 +980,8 @@ static void quirk_via_ioapic(struct pci_dev *dev)
>  	else
>  		tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
>  
> -	pci_info(dev, "%sbling VIA external APIC routing\n",
> -	       tmp == 0 ? "Disa" : "Ena");
> +	pci_info(dev, "%s VIA external APIC routing\n",
> +	       tmp == 0 ? "Disabling" : "Enabling");
>  
>  	/* Offset 0x58: External APIC IRQ output control */
>  	pci_write_config_byte(dev, 0x58, tmp);
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 262421e5d917..c8a27b6290ce 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -310,7 +310,7 @@  struct cdns_pcie {
  *            single function at a time
  * @vendor_id: PCI vendor ID
  * @device_id: PCI device ID
- * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or
+ * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or
  *                available
  * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
  * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 17c59b0d6978..7de82da0bd6d 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -303,7 +303,7 @@  static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
 	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
 
 	/*
-	 * Described in PCIe CEM specification setctions 2.2 (PERST# Signal)
+	 * Described in PCIe CEM specification sections 2.2 (PERST# Signal)
 	 * and 2.2.1 (Initial Power-Up (G3 to S0)).
 	 * The deassertion of PERST# should be delayed 100ms (TPVPERL)
 	 * for the power and clock to become stable.
diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c
index 5a03401f4571..9a00448c7e61 100644
--- a/drivers/pci/endpoint/functions/pci-epf-ntb.c
+++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c
@@ -1262,7 +1262,7 @@  static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb,
 }
 
 /**
- * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
+ * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability
  * @ntb: NTB device that facilitates communication between HOST1 and HOST2
  * @type: PRIMARY interface or SECONDARY interface
  *
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 0b1237cff239..cb2e8351c2cc 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -247,7 +247,7 @@  void of_pci_check_probe_only(void)
 	else
 		pci_clear_flags(PCI_PROBE_ONLY);
 
-	pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis");
+	pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled");
 }
 EXPORT_SYMBOL_GPL(of_pci_check_probe_only);
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 003950c738d2..e16bde66e735 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -980,8 +980,8 @@  static void quirk_via_ioapic(struct pci_dev *dev)
 	else
 		tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
 
-	pci_info(dev, "%sbling VIA external APIC routing\n",
-	       tmp == 0 ? "Disa" : "Ena");
+	pci_info(dev, "%s VIA external APIC routing\n",
+	       tmp == 0 ? "Disabling" : "Enabling");
 
 	/* Offset 0x58: External APIC IRQ output control */
 	pci_write_config_byte(dev, 0x58, tmp);