[v6,4/9] dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct dw_edma_chip

Commit Message

Frank Li April 6, 2022, 3:23 p.m. UTC

There are same name wr(rd)_ch_cnt in struct dw_edma. EDMA driver get
write(read) channel number from register, then save these into dw_edma.
Old wr(rd)_ch_cnt in dw_edma_chip actuall means how many link list memory
are available in ll_region_wr(rd)[EDMA_MAX_WR_CH]. So rename it to
ll_wr(rd)_cnt to indicate actual usage.

Signed-off-by: Frank Li <[e-mail]>
Reviewed-by: Serge Semin <[e-mail]>
---
Change from v5 to v6
 - s/rename/Rename/ at subject
new patch at v4

 drivers/dma/dw-edma/dw-edma-core.c |  4 ++--
 drivers/dma/dw-edma/dw-edma-pcie.c | 12 ++++++------
 include/linux/dma/edma.h           |  8 ++++----
 3 files changed, 12 insertions(+), 12 deletions(-)

Patch

diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index 9e88797916268..cfd1cdaa4c1db 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -913,11 +913,11 @@  int dw_edma_probe(struct dw_edma_chip *chip)
 
 	raw_spin_lock_init(&dw->lock);
 
-	dw->wr_ch_cnt = min_t(u16, chip->wr_ch_cnt,
+	dw->wr_ch_cnt = min_t(u16, chip->ll_wr_cnt,
 			      dw_edma_v0_core_ch_count(dw, EDMA_DIR_WRITE));
 	dw->wr_ch_cnt = min_t(u16, dw->wr_ch_cnt, EDMA_MAX_WR_CH);
 
-	dw->rd_ch_cnt = min_t(u16, chip->rd_ch_cnt,
+	dw->rd_ch_cnt = min_t(u16, chip->ll_rd_cnt,
 			      dw_edma_v0_core_ch_count(dw, EDMA_DIR_READ));
 	dw->rd_ch_cnt = min_t(u16, dw->rd_ch_cnt, EDMA_MAX_RD_CH);
 
diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
index ae42bad24dd5a..7732537f96086 100644
--- a/drivers/dma/dw-edma/dw-edma-pcie.c
+++ b/drivers/dma/dw-edma/dw-edma-pcie.c
@@ -230,14 +230,14 @@  static int dw_edma_pcie_probe(struct pci_dev *pdev,
 	chip->nr_irqs = nr_irqs;
 	chip->ops = &dw_edma_pcie_core_ops;
 
-	chip->wr_ch_cnt = vsec_data.wr_ch_cnt;
-	chip->rd_ch_cnt = vsec_data.rd_ch_cnt;
+	chip->ll_wr_cnt = vsec_data.wr_ch_cnt;
+	chip->ll_rd_cnt = vsec_data.rd_ch_cnt;
 
 	chip->reg_base = pcim_iomap_table(pdev)[vsec_data.rg.bar];
 	if (!chip->reg_base)
 		return -ENOMEM;
 
-	for (i = 0; i < chip->wr_ch_cnt; i++) {
+	for (i = 0; i < chip->ll_wr_cnt; i++) {
 		struct dw_edma_region *ll_region = &chip->ll_region_wr[i];
 		struct dw_edma_region *dt_region = &chip->dt_region_wr[i];
 		struct dw_edma_block *ll_block = &vsec_data.ll_wr[i];
@@ -262,7 +262,7 @@  static int dw_edma_pcie_probe(struct pci_dev *pdev,
 		dt_region->sz = dt_block->sz;
 	}
 
-	for (i = 0; i < chip->rd_ch_cnt; i++) {
+	for (i = 0; i < chip->ll_rd_cnt; i++) {
 		struct dw_edma_region *ll_region = &chip->ll_region_rd[i];
 		struct dw_edma_region *dt_region = &chip->dt_region_rd[i];
 		struct dw_edma_block *ll_block = &vsec_data.ll_rd[i];
@@ -302,7 +302,7 @@  static int dw_edma_pcie_probe(struct pci_dev *pdev,
 		chip->reg_base);
 
 
-	for (i = 0; i < chip->wr_ch_cnt; i++) {
+	for (i = 0; i < chip->ll_wr_cnt; i++) {
 		pci_dbg(pdev, "L. List:\tWRITE CH%.2u, BAR=%u, off=0x%.8lx, sz=0x%zx bytes, addr(v=%p, p=%pa)\n",
 			i, vsec_data.ll_wr[i].bar,
 			vsec_data.ll_wr[i].off, chip->ll_region_wr[i].sz,
@@ -314,7 +314,7 @@  static int dw_edma_pcie_probe(struct pci_dev *pdev,
 			chip->dt_region_wr[i].vaddr, &chip->dt_region_wr[i].paddr);
 	}
 
-	for (i = 0; i < chip->rd_ch_cnt; i++) {
+	for (i = 0; i < chip->ll_rd_cnt; i++) {
 		pci_dbg(pdev, "L. List:\tREAD CH%.2u, BAR=%u, off=0x%.8lx, sz=0x%zx bytes, addr(v=%p, p=%pa)\n",
 			i, vsec_data.ll_rd[i].bar,
 			vsec_data.ll_rd[i].off, chip->ll_region_rd[i].sz,
diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h
index e9ce652b88233..c2039246fc08c 100644
--- a/include/linux/dma/edma.h
+++ b/include/linux/dma/edma.h
@@ -40,8 +40,8 @@  enum dw_edma_map_format {
  * @nr_irqs:		 total dma irq number
  * @ops			 DMA channel to IRQ number mapping
  * @reg_base		 DMA register base address
- * @wr_ch_cnt		 DMA write channel number
- * @rd_ch_cnt		 DMA read channel number
+ * @ll_wr_cnt		 DMA write link list number
+ * @ll_rd_cnt		 DMA read link list number
  * @rg_region		 DMA register region
  * @ll_region_wr	 DMA descriptor link list memory for write channel
  * @ll_region_rd	 DMA descriptor link list memory for read channel
@@ -56,8 +56,8 @@  struct dw_edma_chip {
 
 	void __iomem		*reg_base;
 
-	u16			wr_ch_cnt;
-	u16			rd_ch_cnt;
+	u16			ll_wr_cnt;
+	u16			ll_rd_cnt;
 	/* link list address */
 	struct dw_edma_region	ll_region_wr[EDMA_MAX_WR_CH];
 	struct dw_edma_region	ll_region_rd[EDMA_MAX_RD_CH];