diff mbox series

[v2,6/8] ARM: dts: r9a06g032: Add internal PCI bridge node

Message ID 20220414074011.500533-7-herve.codina@bootlin.com (mailing list archive)
State Superseded
Headers show
Series RZN1 USB Host support | expand

Commit Message

Herve Codina April 14, 2022, 7:40 a.m. UTC 
Add the device node for the r9a06g032 internal PCI bridge device.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 arch/arm/boot/dts/r9a06g032.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Comments

Sergey Shtylyov April 18, 2022, 9:02 a.m. UTC | #1 
Hello!

On 4/14/22 10:40 AM, Herve Codina wrote:

> Add the device node for the r9a06g032 internal PCI bridge device.
> 
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> ---
>  arch/arm/boot/dts/r9a06g032.dtsi | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
> index 636a6ab31c58..848dc034bb8c 100644
> --- a/arch/arm/boot/dts/r9a06g032.dtsi
> +++ b/arch/arm/boot/dts/r9a06g032.dtsi
> @@ -211,6 +211,34 @@ gic: interrupt-controller@44101000 {
>  			interrupts =
>  				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
>  		};
> +
> +		pci_usb: pci@40030000 {
> +			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
> +			device_type = "pci";
> +			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
> +				 <&sysctrl R9A06G032_HCLK_USBPM>,
> +				 <&sysctrl R9A06G032_CLK_PCI_USB>;
> +			clock-names = "hclk_usbh", "hclk_usbpm", "clk_pci_usb";
> +			reg = <0x40030000 0xc00>,
> +			      <0x40020000 0x1100>;
> +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +
> +			bus-range = <0 0>;
> +			#address-cells = <3>;
> +			#size-cells = <2>;
> +			#interrupt-cells = <1>;

   Really? I don't think this PCI bridge is also an interrupt controller...

> +			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
> +			/* Should map all possible DDR as inbound ranges, but
> +			 * the IP only supports a 256MB, 512MB, or 1GB window.
> +			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
> +			 */
> +			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
> +			interrupt-map-mask = <0xf800 0 0 0x7>;
> +			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> +					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> +					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +		};
>  	};
>  
>  	timer {

MBR, Sergey
Herve Codina April 20, 2022, 1:19 p.m. UTC | #2 
Hi Sergey,

On Mon, 18 Apr 2022 12:02:52 +0300
Sergey Shtylyov <s.shtylyov@omp.ru> wrote:

> Hello!
> 
> On 4/14/22 10:40 AM, Herve Codina wrote:
> 
> > Add the device node for the r9a06g032 internal PCI bridge device.
> > 
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > ---
> >  arch/arm/boot/dts/r9a06g032.dtsi | 28 ++++++++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
> > index 636a6ab31c58..848dc034bb8c 100644
> > --- a/arch/arm/boot/dts/r9a06g032.dtsi
> > +++ b/arch/arm/boot/dts/r9a06g032.dtsi
> > @@ -211,6 +211,34 @@ gic: interrupt-controller@44101000 {
> >  			interrupts =
> >  				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
> >  		};
> > +
> > +		pci_usb: pci@40030000 {
> > +			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
> > +			device_type = "pci";
> > +			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
> > +				 <&sysctrl R9A06G032_HCLK_USBPM>,
> > +				 <&sysctrl R9A06G032_CLK_PCI_USB>;
> > +			clock-names = "hclk_usbh", "hclk_usbpm", "clk_pci_usb";
> > +			reg = <0x40030000 0xc00>,
> > +			      <0x40020000 0x1100>;
> > +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> > +
> > +			bus-range = <0 0>;
> > +			#address-cells = <3>;
> > +			#size-cells = <2>;
> > +			#interrupt-cells = <1>;  
> 
>    Really? I don't think this PCI bridge is also an interrupt controller...

The #interrupt-cells property is required in the binding.
The #interrupt-cells is needed when we use interrupt-map property.

At least from 'make dtbindings_check':
	properties: '#interrupt-cells' is a dependency of 'interrupt-map'
	from schema $id: http://devicetree.org/meta-schemas/interrupts.yaml#

Do I miss something ?

Regards,
Hervé

> 
> > +			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
> > +			/* Should map all possible DDR as inbound ranges, but
> > +			 * the IP only supports a 256MB, 512MB, or 1GB window.
> > +			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
> > +			 */
> > +			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
> > +			interrupt-map-mask = <0xf800 0 0 0x7>;
> > +			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> > +					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> > +					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > +		};
> >  	};
> >  
> >  	timer {  
> 
> MBR, Sergey
Rob Herring (Arm) April 20, 2022, 7:56 p.m. UTC | #3 
On Mon, Apr 18, 2022 at 12:02:52PM +0300, Sergey Shtylyov wrote:
> Hello!
> 
> On 4/14/22 10:40 AM, Herve Codina wrote:
> 
> > Add the device node for the r9a06g032 internal PCI bridge device.
> > 
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>
> > ---
> >  arch/arm/boot/dts/r9a06g032.dtsi | 28 ++++++++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
> > index 636a6ab31c58..848dc034bb8c 100644
> > --- a/arch/arm/boot/dts/r9a06g032.dtsi
> > +++ b/arch/arm/boot/dts/r9a06g032.dtsi
> > @@ -211,6 +211,34 @@ gic: interrupt-controller@44101000 {
> >  			interrupts =
> >  				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
> >  		};
> > +
> > +		pci_usb: pci@40030000 {
> > +			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
> > +			device_type = "pci";
> > +			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
> > +				 <&sysctrl R9A06G032_HCLK_USBPM>,
> > +				 <&sysctrl R9A06G032_CLK_PCI_USB>;
> > +			clock-names = "hclk_usbh", "hclk_usbpm", "clk_pci_usb";
> > +			reg = <0x40030000 0xc00>,
> > +			      <0x40020000 0x1100>;
> > +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> > +
> > +			bus-range = <0 0>;
> > +			#address-cells = <3>;
> > +			#size-cells = <2>;
> > +			#interrupt-cells = <1>;
> 
>    Really? I don't think this PCI bridge is also an interrupt controller...

'interrupt-map' depends on '#interrupt-cells'.

> 
> > +			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
> > +			/* Should map all possible DDR as inbound ranges, but
> > +			 * the IP only supports a 256MB, 512MB, or 1GB window.
> > +			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
> > +			 */
> > +			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
> > +			interrupt-map-mask = <0xf800 0 0 0x7>;
> > +			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> > +					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> > +					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > +		};
> >  	};
> >  
> >  	timer {
> 
> MBR, Sergey
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 636a6ab31c58..848dc034bb8c 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -211,6 +211,34 @@  gic: interrupt-controller@44101000 {
 			interrupts =
 				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		pci_usb: pci@40030000 {
+			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
+			device_type = "pci";
+			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
+				 <&sysctrl R9A06G032_HCLK_USBPM>,
+				 <&sysctrl R9A06G032_CLK_PCI_USB>;
+			clock-names = "hclk_usbh", "hclk_usbpm", "clk_pci_usb";
+			reg = <0x40030000 0xc00>,
+			      <0x40020000 0x1100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
+			/* Should map all possible DDR as inbound ranges, but
+			 * the IP only supports a 256MB, 512MB, or 1GB window.
+			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
+			 */
+			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	timer {