diff mbox series

[RFC/RFT,3/6] phy: rockchip: Support pcie v3

Message ID 20220416135458.104048-4-linux@fw-web.de (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series RK3568 PCIe V3 support | expand

Commit Message

Frank Wunderlich April 16, 2022, 1:54 p.m. UTC
From: Frank Wunderlich <frank-w@public-files.de>

RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
It use a dedicated pcie-phy. Add support for this.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
driver was taken from linux 5.10 based on in
https://github.com/JeffyCN/mirrors
which now has disappeared
---
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 278 ++++++++++++++++++
 include/dt-bindings/phy/phy-snps-pcie3.h      |  21 ++
 include/linux/phy/pcie.h                      |  12 +
 5 files changed, 321 insertions(+)
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/dt-bindings/phy/phy-snps-pcie3.h
 create mode 100644 include/linux/phy/pcie.h

Comments

Vinod Koul April 18, 2022, 10:38 a.m. UTC | #1
On 16-04-22, 15:54, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated pcie-phy. Add support for this.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> ---
>  drivers/phy/rockchip/Kconfig                  |   9 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 278 ++++++++++++++++++
>  include/dt-bindings/phy/phy-snps-pcie3.h      |  21 ++
>  include/linux/phy/pcie.h                      |  12 +
>  5 files changed, 321 insertions(+)
>  create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
>  create mode 100644 include/dt-bindings/phy/phy-snps-pcie3.h
>  create mode 100644 include/linux/phy/pcie.h
> 
> diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
> index 9022e395c056..94360fc96a6f 100644
> --- a/drivers/phy/rockchip/Kconfig
> +++ b/drivers/phy/rockchip/Kconfig
> @@ -83,6 +83,15 @@ config PHY_ROCKCHIP_PCIE
>  	help
>  	  Enable this to support the Rockchip PCIe PHY.
>  
> +config PHY_ROCKCHIP_SNPS_PCIE3
> +	tristate "Rockchip Snps PCIe3 PHY Driver"
> +	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	select GENERIC_PHY
> +	select MFD_SYSCON
> +	help
> +	  Enable this to support the Rockchip snps PCIe3 PHY.
> +
>  config PHY_ROCKCHIP_TYPEC
>  	tristate "Rockchip TYPEC PHY Driver"
>  	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
> diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
> index a5041efb5b8f..7eab129230d1 100644
> --- a/drivers/phy/rockchip/Makefile
> +++ b/drivers/phy/rockchip/Makefile
> @@ -8,5 +8,6 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
>  obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
>  obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
>  obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
> +obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
>  obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
> diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> new file mode 100644
> index 000000000000..992b9709a97a
> --- /dev/null
> +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
> @@ -0,0 +1,278 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip PCIE3.0 phy driver
> + *
> + * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/phy/pcie.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/reset.h>
> +#include <dt-bindings/phy/phy-snps-pcie3.h>
> +
> +/* Register for RK3568 */
> +#define GRF_PCIE30PHY_CON1 0x4
> +#define GRF_PCIE30PHY_CON6 0x18
> +#define GRF_PCIE30PHY_CON9 0x24
> +#define GRF_PCIE30PHY_STATUS0 0x80
> +#define SRAM_INIT_DONE(reg) (reg & BIT(14))
> +
> +/* Register for RK3588 */
> +#define PHP_GRF_PCIESEL_CON 0x100
> +#define RK3588_PCIE3PHY_GRF_CMN_CON0 0x0
> +#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1 0x904
> +#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1 0xa04
> +#define RK3588_SRAM_INIT_DONE(reg) (reg & BIT(0))
> +
> +struct rockchip_p3phy_ops;
> +
> +struct rockchip_p3phy_priv {
> +	const struct rockchip_p3phy_ops *ops;
> +	void __iomem *mmio;
> +	/* mode: RC, EP */
> +	int mode;
> +	/* pcie30_phymode: Aggregation, Bifurcation */
> +	int pcie30_phymode;
> +	struct regmap *phy_grf;
> +	struct regmap *pipe_grf;
> +	struct reset_control *p30phy;
> +	struct phy *phy;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	bool is_bifurcation;
> +};
> +
> +struct rockchip_p3phy_ops {
> +	int (*phy_init)(struct rockchip_p3phy_priv *priv);
> +};
> +
> +static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> +	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
> +
> +	/* Actually We don't care EP/RC mode, but just record it */
> +	switch (submode) {
> +	case PHY_MODE_PCIE_RC:
> +		priv->mode = PHY_MODE_PCIE_RC;
> +		break;
> +	case PHY_MODE_PCIE_EP:
> +		priv->mode = PHY_MODE_PCIE_EP;
> +		break;
> +	case PHY_MODE_PCIE_BIFURCATION:
> +		priv->is_bifurcation = true;
> +		break;
> +	default:
> +		pr_info("%s, invalid mode\n", __func__);

this should be err log, also make it dev_err pls

> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
> +{
> +	int ret = 0;

initialization seems superfluous

> +	u32 reg;
> +
> +	/* Deassert PCIe PMA output clamp mode */
> +	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9,
> +		     (0x1 << 15) | (0x1 << 31));

magic numbers.. sounds like BIT(15) and BIT(31)


> +	/* Set bifurcation if needed, and it doesn't care RC/EP */
> +	if (priv->is_bifurcation) {
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
> +			     0x1 | (0xf << 16));
> +		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
> +			     (0x1 << 15) | (0x1 << 31));
> +	}
> +
> +	reset_control_deassert(priv->p30phy);
> +
> +	ret = regmap_read_poll_timeout(priv->phy_grf,
> +				       GRF_PCIE30PHY_STATUS0,
> +				       reg, SRAM_INIT_DONE(reg),
> +				       0, 500);
> +	if (ret)
> +		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
> +		       __func__, reg);

dev_err() pls

> +	return ret;
> +}
> +
> +static const struct rockchip_p3phy_ops rk3568_ops = {
> +	.phy_init = rockchip_p3phy_rk3568_init,
> +};
> +
> +static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
> +{
> +	int ret = 0;

superfluous init again
Krzysztof Kozlowski April 18, 2022, 3:57 p.m. UTC | #2
On 16/04/2022 15:54, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated pcie-phy. Add support for this.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> ---
>  drivers/phy/rockchip/Kconfig                  |   9 +
>  drivers/phy/rockchip/Makefile                 |   1 +
>  .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 278 ++++++++++++++++++
>  include/dt-bindings/phy/phy-snps-pcie3.h      |  21 ++

This goes to separate patch or to the bindings one. File naming is also
not correct. Who is the vendor here? "rockchip," or "snps,"?

The values look specific to this Rockchip implementation, so the file
should be also mentioned in the bindings (e.g. in property using it).

Best regards,
Krzysztof
Philipp Zabel April 20, 2022, 7:29 a.m. UTC | #3
On Sa, 2022-04-16 at 15:54 +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
> It use a dedicated pcie-phy. Add support for this.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> driver was taken from linux 5.10 based on in
> https://github.com/JeffyCN/mirrors
> which now has disappeared
> ---
[...]
> +	priv->p30phy = devm_reset_control_get(dev, "phy");

Please use devm_reset_control_get_exclusive() instead. It is
functionally identical but makes clear that this driver requires
exclusive control over the reset line.

regards
Philipp
diff mbox series

Patch

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 9022e395c056..94360fc96a6f 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -83,6 +83,15 @@  config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_SNPS_PCIE3
+	tristate "Rockchip Snps PCIe3 PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	depends on HAS_IOMEM
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip snps PCIe3 PHY.
+
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile
index a5041efb5b8f..7eab129230d1 100644
--- a/drivers/phy/rockchip/Makefile
+++ b/drivers/phy/rockchip/Makefile
@@ -8,5 +8,6 @@  obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI)	+= phy-rockchip-inno-hdmi.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY)	+= phy-rockchip-naneng-combphy.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE)		+= phy-rockchip-pcie.o
+obj-$(CONFIG_PHY_ROCKCHIP_SNPS_PCIE3)	+= phy-rockchip-snps-pcie3.o
 obj-$(CONFIG_PHY_ROCKCHIP_TYPEC)	+= phy-rockchip-typec.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB)		+= phy-rockchip-usb.o
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
new file mode 100644
index 000000000000..992b9709a97a
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -0,0 +1,278 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip PCIE3.0 phy driver
+ *
+ * Copyright (C) 2020 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/pcie.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <dt-bindings/phy/phy-snps-pcie3.h>
+
+/* Register for RK3568 */
+#define GRF_PCIE30PHY_CON1 0x4
+#define GRF_PCIE30PHY_CON6 0x18
+#define GRF_PCIE30PHY_CON9 0x24
+#define GRF_PCIE30PHY_STATUS0 0x80
+#define SRAM_INIT_DONE(reg) (reg & BIT(14))
+
+/* Register for RK3588 */
+#define PHP_GRF_PCIESEL_CON 0x100
+#define RK3588_PCIE3PHY_GRF_CMN_CON0 0x0
+#define RK3588_PCIE3PHY_GRF_PHY0_STATUS1 0x904
+#define RK3588_PCIE3PHY_GRF_PHY1_STATUS1 0xa04
+#define RK3588_SRAM_INIT_DONE(reg) (reg & BIT(0))
+
+struct rockchip_p3phy_ops;
+
+struct rockchip_p3phy_priv {
+	const struct rockchip_p3phy_ops *ops;
+	void __iomem *mmio;
+	/* mode: RC, EP */
+	int mode;
+	/* pcie30_phymode: Aggregation, Bifurcation */
+	int pcie30_phymode;
+	struct regmap *phy_grf;
+	struct regmap *pipe_grf;
+	struct reset_control *p30phy;
+	struct phy *phy;
+	struct clk_bulk_data *clks;
+	int num_clks;
+	bool is_bifurcation;
+};
+
+struct rockchip_p3phy_ops {
+	int (*phy_init)(struct rockchip_p3phy_priv *priv);
+};
+
+static int rockchip_p3phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	/* Actually We don't care EP/RC mode, but just record it */
+	switch (submode) {
+	case PHY_MODE_PCIE_RC:
+		priv->mode = PHY_MODE_PCIE_RC;
+		break;
+	case PHY_MODE_PCIE_EP:
+		priv->mode = PHY_MODE_PCIE_EP;
+		break;
+	case PHY_MODE_PCIE_BIFURCATION:
+		priv->is_bifurcation = true;
+		break;
+	default:
+		pr_info("%s, invalid mode\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rockchip_p3phy_rk3568_init(struct rockchip_p3phy_priv *priv)
+{
+	int ret = 0;
+	u32 reg;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON9,
+		     (0x1 << 15) | (0x1 << 31));
+	/* Set bifurcation if needed, and it doesn't care RC/EP */
+	if (priv->is_bifurcation) {
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON6,
+			     0x1 | (0xf << 16));
+		regmap_write(priv->phy_grf, GRF_PCIE30PHY_CON1,
+			     (0x1 << 15) | (0x1 << 31));
+	}
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       GRF_PCIE30PHY_STATUS0,
+				       reg, SRAM_INIT_DONE(reg),
+				       0, 500);
+	if (ret)
+		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3568_ops = {
+	.phy_init = rockchip_p3phy_rk3568_init,
+};
+
+static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
+{
+	int ret = 0;
+	u32 reg;
+
+	/* Deassert PCIe PMA output clamp mode */
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0,
+		     (0x1 << 8) | (0x1 << 24));
+
+	reset_control_deassert(priv->p30phy);
+
+	ret = regmap_read_poll_timeout(priv->phy_grf,
+				       RK3588_PCIE3PHY_GRF_PHY0_STATUS1,
+				       reg, RK3588_SRAM_INIT_DONE(reg),
+				       0, 500);
+	ret |= regmap_read_poll_timeout(priv->phy_grf,
+					RK3588_PCIE3PHY_GRF_PHY1_STATUS1,
+					reg, RK3588_SRAM_INIT_DONE(reg),
+					0, 500);
+	if (ret)
+		pr_err("%s: lock failed 0x%x, check input refclk and power supply\n",
+		       __func__, reg);
+	return ret;
+}
+
+static const struct rockchip_p3phy_ops rk3588_ops = {
+	.phy_init = rockchip_p3phy_rk3588_init,
+};
+
+static int rochchip_p3phy_init(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(priv->num_clks, priv->clks);
+	if (ret) {
+		pr_err("failed to enable PCIe bulk clks %d\n", ret);
+		return ret;
+	}
+
+	reset_control_assert(priv->p30phy);
+	udelay(1);
+
+	if (priv->ops->phy_init) {
+		ret = priv->ops->phy_init(priv);
+		if (ret)
+			clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	};
+
+	return ret;
+}
+
+static int rochchip_p3phy_exit(struct phy *phy)
+{
+	struct rockchip_p3phy_priv *priv = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(priv->num_clks, priv->clks);
+	reset_control_assert(priv->p30phy);
+	return 0;
+}
+
+static const struct phy_ops rochchip_p3phy_ops = {
+	.init = rochchip_p3phy_init,
+	.exit = rochchip_p3phy_exit,
+	.set_mode = rockchip_p3phy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static int rockchip_p3phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct rockchip_p3phy_priv *priv;
+	struct device_node *np = dev->of_node;
+	struct resource *res;
+	int ret;
+	u32 val, reg;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->mmio)) {
+		ret = PTR_ERR(priv->mmio);
+		return ret;
+	}
+
+	priv->ops = of_device_get_match_data(&pdev->dev);
+	if (!priv->ops) {
+		dev_err(&pdev->dev, "no of match data provided\n");
+		return -EINVAL;
+	}
+
+	priv->phy_grf = syscon_regmap_lookup_by_phandle(np, "rockchip,phy-grf");
+	if (IS_ERR(priv->phy_grf)) {
+		dev_err(dev, "failed to find rockchip,phy_grf regmap\n");
+		return PTR_ERR(priv->phy_grf);
+	}
+
+	priv->pipe_grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+							 "rockchip,pipe-grf");
+	if (IS_ERR(priv->pipe_grf))
+		dev_info(dev, "failed to find rockchip,pipe_grf regmap\n");
+
+	ret = device_property_read_u32(dev, "rockchip,pcie30-phymode", &val);
+	if (!ret)
+		priv->pcie30_phymode = val;
+	else
+		priv->pcie30_phymode = PHY_MODE_PCIE_AGGREGATION;
+
+	/* Select correct pcie30_phymode */
+	if (priv->pcie30_phymode > 4)
+		priv->pcie30_phymode = PHY_MODE_PCIE_AGGREGATION;
+
+	regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0,
+		     (0x7<<16) | priv->pcie30_phymode);
+
+	/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */
+	if (!IS_ERR(priv->pipe_grf)) {
+		reg = priv->pcie30_phymode & 3;
+		if (reg)
+			regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON,
+				     (reg << 16) | reg);
+	};
+
+	priv->phy = devm_phy_create(dev, NULL, &rochchip_p3phy_ops);
+	if (IS_ERR(priv->phy)) {
+		dev_err(dev, "failed to create combphy\n");
+		return PTR_ERR(priv->phy);
+	}
+
+	priv->p30phy = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(priv->p30phy)) {
+		dev_warn(dev, "no phy reset control specified\n");
+		priv->p30phy = NULL;
+	}
+
+	priv->num_clks = devm_clk_bulk_get_all(dev, &priv->clks);
+	if (priv->num_clks < 1)
+		return -ENODEV;
+
+	dev_set_drvdata(dev, priv);
+	phy_set_drvdata(priv->phy, priv);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id rockchip_p3phy_of_match[] = {
+	{ .compatible = "rockchip,rk3568-pcie3-phy", .data = &rk3568_ops },
+	{ .compatible = "rockchip,rk3588-pcie3-phy", .data = &rk3588_ops },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_p3phy_of_match);
+
+static struct platform_driver rockchip_p3phy_driver = {
+	.probe	= rockchip_p3phy_probe,
+	.driver = {
+		.name = "rockchip-snps-pcie3-phy",
+		.of_match_table = rockchip_p3phy_of_match,
+	},
+};
+module_platform_driver(rockchip_p3phy_driver);
+MODULE_DESCRIPTION("Rockchip Synopsys PCIe 3.0 PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/include/dt-bindings/phy/phy-snps-pcie3.h b/include/dt-bindings/phy/phy-snps-pcie3.h
new file mode 100644
index 000000000000..5006947f2285
--- /dev/null
+++ b/include/dt-bindings/phy/phy-snps-pcie3.h
@@ -0,0 +1,21 @@ 
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+
+#ifndef _DT_BINDINGS_PHY_SNPS_PCIE3
+#define _DT_BINDINGS_PHY_SNPS_PCIE3
+
+/*
+ * pcie30_phy_mode[2:0]
+ * bit2: aggregation
+ * bit1: bifurcation for port 1
+ * bit0: bifurcation for port 0
+ */
+#define PHY_MODE_PCIE_AGGREGATION 4	/* PCIe3x4 */
+#define PHY_MODE_PCIE_NANBNB	0	/* P1:PCIe3x2  +  P0:PCIe3x2 */
+#define PHY_MODE_PCIE_NANBBI	1	/* P1:PCIe3x2  +  P0:PCIe3x1*2 */
+#define PHY_MODE_PCIE_NABINB	2	/* P1:PCIe3x1*2 + P0:PCIe3x2 */
+#define PHY_MODE_PCIE_NABIBI	3	/* P1:PCIe3x1*2 + P0:PCIe3x1*2 */
+
+#endif /* _DT_BINDINGS_PHY_SNPS_PCIE3 */
diff --git a/include/linux/phy/pcie.h b/include/linux/phy/pcie.h
new file mode 100644
index 000000000000..93c997f520fe
--- /dev/null
+++ b/include/linux/phy/pcie.h
@@ -0,0 +1,12 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
+ */
+#ifndef __PHY_PCIE_H
+#define __PHY_PCIE_H
+
+#define PHY_MODE_PCIE_RC 20
+#define PHY_MODE_PCIE_EP 21
+#define PHY_MODE_PCIE_BIFURCATION 22
+
+#endif