diff mbox series

[RFC,3/5] PCI: qcom: Remove unnecessary pipe_clk handling

Message ID 20220421102041.17345-4-johan+linaro@kernel.org (mailing list archive)
State RFC
Delegated to: Lorenzo Pieralisi
Headers show
Series phy: qcom-qmp: add support for pipe clock muxing | expand

Commit Message

Johan Hovold April 21, 2022, 10:20 a.m. UTC 
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

QMP PHY driver already does clk_prepare_enable()/_disable() pipe_clk.
Remove extra calls to enable/disable this clock from the PCIe driver, so
that the PHY driver can manage the clock on its own.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 44 ++------------------------
 1 file changed, 3 insertions(+), 41 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 774d486bf2f7..6e6e40fbfc13 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -128,7 +128,6 @@  struct qcom_pcie_resources_2_3_2 {
 	struct clk *master_clk;
 	struct clk *slave_clk;
 	struct clk *cfg_clk;
-	struct clk *pipe_clk;
 	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
 };
 
@@ -165,7 +164,6 @@  struct qcom_pcie_resources_2_7_0 {
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
-	struct clk *pipe_clk;
 	struct clk *pipe_clk_src;
 	struct clk *phy_pipe_clk;
 	struct clk *ref_clk_src;
@@ -597,8 +595,7 @@  static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
 	if (IS_ERR(res->slave_clk))
 		return PTR_ERR(res->slave_clk);
 
-	res->pipe_clk = devm_clk_get(dev, "pipe");
-	return PTR_ERR_OR_ZERO(res->pipe_clk);
+	return 0;
 }
 
 static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
@@ -613,13 +610,6 @@  static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
-static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-
-	clk_disable_unprepare(res->pipe_clk);
-}
-
 static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
@@ -694,22 +684,6 @@  static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-	struct dw_pcie *pci = pcie->pci;
-	struct device *dev = pci->dev;
-	int ret;
-
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
@@ -1198,8 +1172,7 @@  static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 			return PTR_ERR(res->ref_clk_src);
 	}
 
-	res->pipe_clk = devm_clk_get(dev, "pipe");
-	return PTR_ERR_OR_ZERO(res->pipe_clk);
+	return 0;
 }
 
 static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
@@ -1292,14 +1265,7 @@  static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 	if (pcie->cfg->pipe_clk_need_muxing)
 		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
 
-	return clk_prepare_enable(res->pipe_clk);
-}
-
-static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
-	clk_disable_unprepare(res->pipe_clk);
+	return 0;
 }
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1449,9 +1415,7 @@  static const struct qcom_pcie_ops ops_1_0_0 = {
 static const struct qcom_pcie_ops ops_2_3_2 = {
 	.get_resources = qcom_pcie_get_resources_2_3_2,
 	.init = qcom_pcie_init_2_3_2,
-	.post_init = qcom_pcie_post_init_2_3_2,
 	.deinit = qcom_pcie_deinit_2_3_2,
-	.post_deinit = qcom_pcie_post_deinit_2_3_2,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
@@ -1478,7 +1442,6 @@  static const struct qcom_pcie_ops ops_2_7_0 = {
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.post_deinit = qcom_pcie_post_deinit_2_7_0,
 };
 
 /* Qcom IP rev.: 1.9.0 */
@@ -1488,7 +1451,6 @@  static const struct qcom_pcie_ops ops_1_9_0 = {
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.post_deinit = qcom_pcie_post_deinit_2_7_0,
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };