@@ -333,7 +333,7 @@ config SGIWD93_SCSI
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
3ware is the only hardware ATA-Raid product in Linux to date.
This card is 2,4, or 8 channel master mode support only.
@@ -380,7 +380,7 @@ config SCSI_3W_SAS
config SCSI_ACARD
tristate "ACARD SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This driver supports the ACARD SCSI host adapter.
Support Chip <ATP870 ATP876 ATP880 ATP885>
@@ -472,7 +472,7 @@ config SCSI_DPT_I2O
config SCSI_ADVANSYS
tristate "AdvanSys SCSI support"
depends on SCSI
- depends on ISA || EISA || PCI
+ depends on (ISA || EISA || PCI) && HAS_IOPORT
depends on ISA_DMA_API || !ISA
help
This is a driver for all SCSI host adapters manufactured by
@@ -643,7 +643,7 @@ config SCSI_SNIC_DEBUG_FS
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This is support for Domex DMX3191D SCSI Host Adapters.
@@ -657,7 +657,7 @@ config SCSI_FDOMAIN
config SCSI_FDOMAIN_PCI
tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_FDOMAIN
help
This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
@@ -710,7 +710,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_IPS
tristate "IBM ServeRAID support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This is support for the IBM ServeRAID hardware RAID controllers.
See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
@@ -770,7 +770,7 @@ config SCSI_IBMVFC_TRACE
config SCSI_INITIO
tristate "Initio 9100U(W) support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This is support for the Initio 91XXU(W) SCSI host adapter. Please
read the SCSI-HOWTO, available from
@@ -781,7 +781,7 @@ config SCSI_INITIO
config SCSI_INIA100
tristate "Initio INI-A100U2W support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This is support for the Initio INI-A100U2W SCSI host adapter.
Please read the SCSI-HOWTO, available from
@@ -793,6 +793,7 @@ config SCSI_INIA100
config SCSI_PPA
tristate "IOMEGA parallel port (ppa - older drives)"
depends on SCSI && PARPORT_PC
+ depends on HAS_IOPORT
help
This driver supports older versions of IOMEGA's parallel port ZIP
drive (a 100 MB removable media device).
@@ -1187,7 +1188,7 @@ config SCSI_SIM710
config SCSI_DC395x
tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This driver supports PCI SCSI host adapters based on the ASIC
@@ -5,7 +5,7 @@
#
config SCSI_AIC79XX
tristate "Adaptec AIC79xx U320 support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This driver supports all of Adaptec's Ultra 320 PCI-X
@@ -5,7 +5,7 @@
#
config SCSI_AIC7XXX
tristate "Adaptec AIC7xxx Fast -> U160 support"
- depends on (PCI || EISA) && SCSI
+ depends on (PCI || EISA) && HAS_IOPORT && SCSI
select SCSI_SPI_ATTRS
help
This driver supports all of Adaptec's Fast through Ultra 160 PCI
@@ -8,7 +8,7 @@
config SCSI_AIC94XX
tristate "Adaptec AIC94xx SAS/SATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select SCSI_SAS_LIBSAS
select FW_LOADER
help
@@ -1,13 +1,13 @@
# SPDX-License-Identifier: GPL-2.0-only
config MEGARAID_NEWGEN
bool "LSI Logic New Generation RAID Device Drivers"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
LSI Logic RAID Device Drivers
config MEGARAID_MM
tristate "LSI Logic Management Module (New Driver)"
- depends on PCI && SCSI && MEGARAID_NEWGEN
+ depends on PCI && HAS_IOPORT && SCSI && MEGARAID_NEWGEN
help
Management Module provides ioctl, sysfs support for LSI Logic
RAID controllers.
@@ -67,7 +67,7 @@ config MEGARAID_MAILBOX
config MEGARAID_LEGACY
tristate "LSI Logic Legacy MegaRAID Driver"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
help
This driver supports the LSI MegaRAID 418, 428, 438, 466, 762, 490
and 467 SCSI host adapters. This driver also support the all U320
@@ -9,7 +9,7 @@
config SCSI_MVSAS
tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
- depends on PCI
+ depends on PCI && HAS_IOPORT
select SCSI_SAS_LIBSAS
select FW_LOADER
help
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
config SCSI_QLA_FC
tristate "QLogic QLA2XXX Fibre Channel Support"
- depends on PCI && SCSI
+ depends on PCI && HAS_IOPORT && SCSI
depends on SCSI_FC_ATTRS
depends on NVME_FC || !NVME_FC
select FW_LOADER
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> --- drivers/scsi/Kconfig | 19 ++++++++++--------- drivers/scsi/aic7xxx/Kconfig.aic79xx | 2 +- drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +- drivers/scsi/aic94xx/Kconfig | 2 +- drivers/scsi/megaraid/Kconfig.megaraid | 6 +++--- drivers/scsi/mvsas/Kconfig | 2 +- drivers/scsi/qla2xxx/Kconfig | 2 +- 7 files changed, 18 insertions(+), 17 deletions(-)