| Message ID | 20220505135407.1352382-2-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | PCI: qcom: Fix higher MSI vectors handling | expand |
On Thu, May 05, 2022 at 04:54:01PM +0300, Dmitry Baryshkov wrote: > I have replied with my Tested-by to the patch at [2], which has landed > in the linux-next as the commit 20f1bfb8dd62 ("PCI: qcom: > Add support for handling MSIs from 8 endpoints"). However lately I > noticed that during the tests I still had 'pcie_pme=nomsi', so the > device was not forced to use higher MSI vectors. > > After removing this option I noticed that hight MSI vectors are not s/hight/high/ > delivered on tested platforms. Additional research pointed to > a patch in msm-4.14 ([1]), which describes that each group of MSI > vectors is mapped to the separate interrupt. > > Without these changes specifying num_verctors can lead to missing MSI s/num_verctors/num_vectors/ > interrupts and thus to devices malfunction. > > Fixes: 20f1bfb8dd62 ("PCI: qcom: Add support for handling MSIs from 8 endpoints") > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/pci/controller/dwc/pcie-qcom.c | 1 - > 1 file changed, 1 deletion(-) Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index c940e67d831c..375f27ab9403 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1593,7 +1593,6 @@ static int qcom_pcie_probe(struct platform_device *pdev) pci->dev = dev; pci->ops = &dw_pcie_ops; pp = &pci->pp; - pp->num_vectors = MAX_MSI_IRQS; pcie->pci = pci;
I have replied with my Tested-by to the patch at [2], which has landed in the linux-next as the commit 20f1bfb8dd62 ("PCI: qcom: Add support for handling MSIs from 8 endpoints"). However lately I noticed that during the tests I still had 'pcie_pme=nomsi', so the device was not forced to use higher MSI vectors. After removing this option I noticed that hight MSI vectors are not delivered on tested platforms. Additional research pointed to a patch in msm-4.14 ([1]), which describes that each group of MSI vectors is mapped to the separate interrupt. Without these changes specifying num_verctors can lead to missing MSI interrupts and thus to devices malfunction. Fixes: 20f1bfb8dd62 ("PCI: qcom: Add support for handling MSIs from 8 endpoints") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 1 - 1 file changed, 1 deletion(-)