| Message ID | 20220729033331.3075-1-jianjun.wang@mediatek.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] dt-bindings: PCI: mediatek-gen3: Add support for MT8188 and MT8195 | expand |
On Fri, Jul 29, 2022 at 11:33:31AM +0800, Jianjun Wang wrote: > MT8188 and MT8195 are ARM platform SoCs with the same PCIe IP as MT8192. > > Also add new clock name "peri_mem" since the MT8188 and MT8195 use clock > "peri_mem" instead of "top_133m". > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > --- > Changes in v2: > Merge two patches into one. > --- > .../bindings/pci/mediatek-pcie-gen3.yaml | 51 +++++++++++++++---- > 1 file changed, 40 insertions(+), 11 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > index 0499b94627ae..038e25ae0be7 100644 > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > @@ -43,12 +43,16 @@ description: |+ > each set has its own address for MSI message, and supports 32 MSI vectors > to generate interrupt. > > -allOf: > - - $ref: /schemas/pci/pci-bus.yaml# > - > properties: > compatible: > - const: mediatek,mt8192-pcie > + oneOf: > + - items: > + - enum: > + - mediatek,mt8188-pcie > + - mediatek,mt8195-pcie > + - const: mediatek,mt8192-pcie > + - items: > + - const: mediatek,mt8192-pcie > > reg: > maxItems: 1 > @@ -78,13 +82,7 @@ properties: > maxItems: 6 > > clock-names: > - items: > - - const: pl_250m > - - const: tl_26m > - - const: tl_96m > - - const: tl_32k > - - const: peri_26m > - - const: top_133m > + maxItems: 6 > > assigned-clocks: > maxItems: 1 > @@ -126,9 +124,40 @@ required: > - interrupts > - ranges > - clocks > + - clock-names > - '#interrupt-cells' > - interrupt-controller > > +allOf: > + - $ref: /schemas/pci/pci-bus.yaml# > + - if: > + properties: > + compatible: > + contains: > + enum: > + - mediatek,mt8188-pcie > + - mediatek,mt8195-pcie > + then: > + properties: > + clock-names: > + items: > + - const: pl_250m > + - const: tl_26m > + - const: tl_96m > + - const: tl_32k > + - const: peri_26m > + - const: peri_mem > + else: > + properties: > + clock-names: > + items: > + - const: pl_250m > + - const: tl_26m > + - const: tl_96m > + - const: tl_32k > + - const: peri_26m > + - const: top_133m I'm not sure it's worth enforcing just the last clock name. Just do: enum: [ peri_mem, top_133m ] And key in the top level. Rob
Hi Rob, Thanks for your comment. On Fri, 2022-07-29 at 16:53 -0600, Rob Herring wrote: > On Fri, Jul 29, 2022 at 11:33:31AM +0800, Jianjun Wang wrote: > > MT8188 and MT8195 are ARM platform SoCs with the same PCIe IP as > > MT8192. > > > > Also add new clock name "peri_mem" since the MT8188 and MT8195 use > > clock > > "peri_mem" instead of "top_133m". > > > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > > --- > > Changes in v2: > > Merge two patches into one. > > --- > > .../bindings/pci/mediatek-pcie-gen3.yaml | 51 > > +++++++++++++++---- > > 1 file changed, 40 insertions(+), 11 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie- > > gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie- > > gen3.yaml > > index 0499b94627ae..038e25ae0be7 100644 > > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > > @@ -43,12 +43,16 @@ description: |+ > > each set has its own address for MSI message, and supports 32 > > MSI vectors > > to generate interrupt. > > > > -allOf: > > - - $ref: /schemas/pci/pci-bus.yaml# > > - > > properties: > > compatible: > > - const: mediatek,mt8192-pcie > > + oneOf: > > + - items: > > + - enum: > > + - mediatek,mt8188-pcie > > + - mediatek,mt8195-pcie > > + - const: mediatek,mt8192-pcie > > + - items: > > + - const: mediatek,mt8192-pcie > > > > reg: > > maxItems: 1 > > @@ -78,13 +82,7 @@ properties: > > maxItems: 6 > > > > clock-names: > > - items: > > - - const: pl_250m > > - - const: tl_26m > > - - const: tl_96m > > - - const: tl_32k > > - - const: peri_26m > > - - const: top_133m > > + maxItems: 6 > > > > assigned-clocks: > > maxItems: 1 > > @@ -126,9 +124,40 @@ required: > > - interrupts > > - ranges > > - clocks > > + - clock-names > > - '#interrupt-cells' > > - interrupt-controller > > > > +allOf: > > + - $ref: /schemas/pci/pci-bus.yaml# > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - mediatek,mt8188-pcie > > + - mediatek,mt8195-pcie > > + then: > > + properties: > > + clock-names: > > + items: > > + - const: pl_250m > > + - const: tl_26m > > + - const: tl_96m > > + - const: tl_32k > > + - const: peri_26m > > + - const: peri_mem > > + else: > > + properties: > > + clock-names: > > + items: > > + - const: pl_250m > > + - const: tl_26m > > + - const: tl_96m > > + - const: tl_32k > > + - const: peri_26m > > + - const: top_133m > > I'm not sure it's worth enforcing just the last clock name. Just do: > > enum: [ peri_mem, top_133m ] > > And key in the top level. OK, I'll use "enum" to add the new clock name in the next version. Thanks. > > Rob
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml index 0499b94627ae..038e25ae0be7 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -43,12 +43,16 @@ description: |+ each set has its own address for MSI message, and supports 32 MSI vectors to generate interrupt. -allOf: - - $ref: /schemas/pci/pci-bus.yaml# - properties: compatible: - const: mediatek,mt8192-pcie + oneOf: + - items: + - enum: + - mediatek,mt8188-pcie + - mediatek,mt8195-pcie + - const: mediatek,mt8192-pcie + - items: + - const: mediatek,mt8192-pcie reg: maxItems: 1 @@ -78,13 +82,7 @@ properties: maxItems: 6 clock-names: - items: - - const: pl_250m - - const: tl_26m - - const: tl_96m - - const: tl_32k - - const: peri_26m - - const: top_133m + maxItems: 6 assigned-clocks: maxItems: 1 @@ -126,9 +124,40 @@ required: - interrupts - ranges - clocks + - clock-names - '#interrupt-cells' - interrupt-controller +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8188-pcie + - mediatek,mt8195-pcie + then: + properties: + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: tl_96m + - const: tl_32k + - const: peri_26m + - const: peri_mem + else: + properties: + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: tl_96m + - const: tl_32k + - const: peri_26m + - const: top_133m + unevaluatedProperties: false examples:
MT8188 and MT8195 are ARM platform SoCs with the same PCIe IP as MT8192. Also add new clock name "peri_mem" since the MT8188 and MT8195 use clock "peri_mem" instead of "top_133m". Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> --- Changes in v2: Merge two patches into one. --- .../bindings/pci/mediatek-pcie-gen3.yaml | 51 +++++++++++++++---- 1 file changed, 40 insertions(+), 11 deletions(-)