diff mbox series

[v5,07/11] arm64: dts: mt7986: add usb related device nodes

Message ID 20221117162728.20608-8-linux@fw-web.de (mailing list archive)
State Superseded
Headers show
Series Add BananaPi R3 | expand

Commit Message

Frank Wunderlich Nov. 17, 2022, 4:27 p.m. UTC
From: Sam Shih <sam.shih@mediatek.com>

This patch adds USB support for MT7986.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes compared to sams original version:
- reorder xhci-clocks based on yaml binding

v5:
 - update ranges/reg of usb-phy
 - not added RB from AngeloGioacchino for v4 because of these changes
---
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 28 ++++++++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 55 ++++++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 28 ++++++++++
 3 files changed, 111 insertions(+)

Comments

Chunfeng Yun (云春峰) Nov. 18, 2022, 6:43 a.m. UTC | #1
On Thu, 2022-11-17 at 17:27 +0100, Frank Wunderlich wrote:
> From: Sam Shih <sam.shih@mediatek.com>
> 
> This patch adds USB support for MT7986.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes compared to sams original version:
> - reorder xhci-clocks based on yaml binding
> 
> v5:
>  - update ranges/reg of usb-phy
>  - not added RB from AngeloGioacchino for v4 because of these changes
> ---
>  arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 28 ++++++++++
>  arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 55
> ++++++++++++++++++++
>  arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 28 ++++++++++
>  3 files changed, 111 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> index 006878e3f2b2..2b5d7ea31b4d 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -23,6 +23,24 @@ memory@40000000 {
>  		device_type = "memory";
>  		reg = <0 0x40000000 0 0x40000000>;
>  	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	reg_5v: regulator-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
>  };
Usually if we use a gpio to control a switch to turn on/off power, we
model it as a fixed regulator, but here no gpio provided in reg_3p3v
and reg_5v, if no gpio used, no need these two fixed regulators too.

>  
>  &crypto {
> @@ -140,6 +158,12 @@ &spi1 {
>  	status = "okay";
>  };
>  
> +&ssusb {
> +	vusb33-supply = <&reg_3p3v>;
> +	vbus-supply = <&reg_5v>;
These two supply can be removed if no swith to control them, they are
optional.

> +	status = "okay";
> +};
> +
>  &switch {
>  	ports {
>  		#address-cells = <1>;
> @@ -201,6 +225,10 @@ &uart2 {
>  	status = "okay";
>  };
>  
> +&usb_phy {
> +	status = "okay";
> +};
> +
>  &wifi {
>  	status = "okay";
>  	pinctrl-names = "default", "dbdc";
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> index 29da9b8ed753..c69b8bff7f4a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> @@ -281,6 +281,61 @@ spi1: spi@1100b000 {
>  			status = "disabled";
>  		};
>  
> +		ssusb: usb@11200000 {
> +			compatible = "mediatek,mt7986-xhci",
> +				     "mediatek,mtk-xhci";
> +			reg = <0 0x11200000 0 0x2e00>,
> +			      <0 0x11203e00 0 0x0100>;
> +			reg-names = "mac", "ippc";
> +			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
> +				 <&infracfg CLK_INFRA_IUSB_CK>,
> +				 <&infracfg CLK_INFRA_IUSB_133_CK>,
> +				 <&infracfg CLK_INFRA_IUSB_66M_CK>,
> +				 <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
> +			clock-names = "sys_ck",
> +				      "ref_ck",
> +				      "mcu_ck",
> +				      "dma_ck",
> +				      "xhci_ck";
> +			phys = <&u2port0 PHY_TYPE_USB2>,
> +			       <&u3port0 PHY_TYPE_USB3>,
> +			       <&u2port1 PHY_TYPE_USB2>;
> +			status = "disabled";
> +		};
> +
> +		usb_phy: t-phy@11e10000 {
> +			compatible = "mediatek,mt7986-tphy",
> +				     "mediatek,generic-tphy-v2";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0 0x11e10000 0x1700>;
> +			status = "disabled";
> +
> +			u2port0: usb-phy@0 {
> +				reg = <0x0 0x700>;
> +				clocks = <&topckgen
> CLK_TOP_DA_U2_REFSEL>,
> +					 <&topckgen
> CLK_TOP_DA_U2_CK_1P_SEL>;
> +				clock-names = "ref", "da_ref";
> +				#phy-cells = <1>;
> +			};
> +
> +			u3port0: usb-phy@700 {
> +				reg = <0x700 0x900>;
> +				clocks = <&topckgen
> CLK_TOP_USB3_PHY_SEL>;
> +				clock-names = "ref";
> +				#phy-cells = <1>;
> +			};
> +
> +			u2port1: usb-phy@1000 {
> +				reg = <0x1000 0x700>;
> +				clocks = <&topckgen
> CLK_TOP_DA_U2_REFSEL>,
> +					 <&topckgen
> CLK_TOP_DA_U2_CK_1P_SEL>;
> +				clock-names = "ref", "da_ref";
> +				#phy-cells = <1>;
> +			};
> +		};
> +
>  		ethsys: syscon@15000000 {
>  			 #address-cells = <1>;
>  			 #size-cells = <1>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> index 2c7f1d4fb352..a98025112b5a 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -23,6 +23,24 @@ memory@40000000 {
>  		device_type = "memory";
>  		reg = <0 0x40000000 0 0x40000000>;
>  	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	reg_5v: regulator-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
ditto
> +	};
>  };
>  
>  &crypto {
> @@ -167,10 +185,20 @@ &spi1 {
>  	status = "okay";
>  };
>  
> +&ssusb {
> +	vusb33-supply = <&reg_3p3v>;
> +	vbus-supply = <&reg_5v>;
ditto

> +	status = "okay";
> +};
> +
>  &uart0 {
>  	status = "okay";
>  };
>  
> +&usb_phy {
> +	status = "okay";
> +};
> +
>  &wifi {
>  	status = "okay";
>  	pinctrl-names = "default", "dbdc";
Frank Wunderlich Nov. 18, 2022, 4:13 p.m. UTC | #2
Hi

> Gesendet: Freitag, 18. November 2022 um 07:43 Uhr
> Von: "Chunfeng Yun (云春峰)" <Chunfeng.Yun@mediatek.com>
> On Thu, 2022-11-17 at 17:27 +0100, Frank Wunderlich wrote:
> > From: Sam Shih <sam.shih@mediatek.com>
> > 
> > This patch adds USB support for MT7986.
> > 
> > Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> > Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> > ---
> > changes compared to sams original version:
> > - reorder xhci-clocks based on yaml binding
> > 
> > v5:
> >  - update ranges/reg of usb-phy
> >  - not added RB from AngeloGioacchino for v4 because of these changes

> > diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > index 006878e3f2b2..2b5d7ea31b4d 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> > @@ -23,6 +23,24 @@ memory@40000000 {
> >  		device_type = "memory";
> >  		reg = <0 0x40000000 0 0x40000000>;
> >  	};
> > +
> > +	reg_3p3v: regulator-3p3v {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "fixed-3.3V";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		regulator-boot-on;
> > +		regulator-always-on;
> > +	};
> > +
> > +	reg_5v: regulator-5v {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "fixed-5V";
> > +		regulator-min-microvolt = <5000000>;
> > +		regulator-max-microvolt = <5000000>;
> > +		regulator-boot-on;
> > +		regulator-always-on;
> > +	};
> >  };
> Usually if we use a gpio to control a switch to turn on/off power, we
> model it as a fixed regulator, but here no gpio provided in reg_3p3v
> and reg_5v, if no gpio used, no need these two fixed regulators too.

i can drop 5v regulator, but 3v3 is used by emmc, so i would move that to the mmc-patch

> >  
> >  &crypto {
> > @@ -140,6 +158,12 @@ &spi1 {
> >  	status = "okay";
> >  };
> >  
> > +&ssusb {
> > +	vusb33-supply = <&reg_3p3v>;
> > +	vbus-supply = <&reg_5v>;
> These two supply can be removed if no swith to control them, they are
> optional.

ok, i drop the references.

anything else ok?

prepared patch here (now yet squashed):
https://github.com/frank-w/BPI-R2-4.14/commits/6.1-r3dts

regards Frank
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 006878e3f2b2..2b5d7ea31b4d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -23,6 +23,24 @@  memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &crypto {
@@ -140,6 +158,12 @@  &spi1 {
 	status = "okay";
 };
 
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
 &switch {
 	ports {
 		#address-cells = <1>;
@@ -201,6 +225,10 @@  &uart2 {
 	status = "okay";
 };
 
+&usb_phy {
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 	pinctrl-names = "default", "dbdc";
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 29da9b8ed753..c69b8bff7f4a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -281,6 +281,61 @@  spi1: spi@1100b000 {
 			status = "disabled";
 		};
 
+		ssusb: usb@11200000 {
+			compatible = "mediatek,mt7986-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11200000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
+				 <&infracfg CLK_INFRA_IUSB_CK>,
+				 <&infracfg CLK_INFRA_IUSB_133_CK>,
+				 <&infracfg CLK_INFRA_IUSB_66M_CK>,
+				 <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
+			clock-names = "sys_ck",
+				      "ref_ck",
+				      "mcu_ck",
+				      "dma_ck",
+				      "xhci_ck";
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			status = "disabled";
+		};
+
+		usb_phy: t-phy@11e10000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e10000 0x1700>;
+			status = "disabled";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x900>;
+				clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			u2port1: usb-phy@1000 {
+				reg = <0x1000 0x700>;
+				clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
+					 <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+			};
+		};
+
 		ethsys: syscon@15000000 {
 			 #address-cells = <1>;
 			 #size-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 2c7f1d4fb352..a98025112b5a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -23,6 +23,24 @@  memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &crypto {
@@ -167,10 +185,20 @@  &spi1 {
 	status = "okay";
 };
 
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
 
+&usb_phy {
+	status = "okay";
+};
+
 &wifi {
 	status = "okay";
 	pinctrl-names = "default", "dbdc";