@@ -30,6 +30,9 @@ config ARM_GIC_V2M
config GIC_NON_BANKED
bool
+config ARM_GIC_MSI_LIB
+ bool
+
config ARM_GIC_V3
bool
select IRQ_DOMAIN_HIERARCHY
@@ -30,6 +30,7 @@ obj-$(CONFIG_ARCH_SPEAR3XX) += spear-sh
obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_PM) += irq-gic-pm.o
obj-$(CONFIG_ARCH_REALVIEW) += irq-gic-realview.o
+obj-$(CONFIG_ARM_GIC_MSI_LIB) += irq-gic-msi-lib.o
obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-v3-mbi.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o irq-gic-v3-its-platform-msi.o irq-gic-v4.o
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2022 Linutronix GmbH
+// Copyright (C) 2022 Intel
+
+#include <linux/export.h>
+
+#include "irq-gic-msi-lib.h"
+
+/**
+ * gic_msi_lib_init_dev_msi_info - Domain info setup for MSI domains
+ * @dev: The device for which the domain is created for
+ * @domain: The domain providing this callback
+ * @real_parent: The real parent domain of the to initialize domain
+ * which might be a domain built on top of @domain
+ * or @domain itself
+ * @info: The domain info for the to initialize domain
+ *
+ * This function is to be used for all types of MSI domains above the root
+ * parent domain and any intermediates. The topmost parent domain specific
+ * functionality is determined via @real_parent.
+ *
+ * All intermediate domains between the root and the device domain must
+ * have either msi_parent_ops.init_dev_msi_info = msi_parent_init_dev_msi_info
+ * or invoke it down the line.
+ */
+bool gic_msi_lib_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
+ struct irq_domain *real_parent,
+ struct msi_domain_info *info)
+{
+ const struct msi_parent_ops *pops = real_parent->msi_parent_ops;
+
+ /*
+ * MSI parent domain specific settings. For now there is only the
+ * root parent domain, e.g. NEXUS, acting as a MSI parent, but it is
+ * possible to stack MSI parents. See x86 vector -> irq remapping
+ */
+ if (domain->bus_token == pops->bus_select_token) {
+ if (WARN_ON_ONCE(domain != real_parent))
+ return false;
+ } else {
+ WARN_ON_ONCE(1);
+ return false;
+ }
+
+ /* Parent ops available? */
+ if (WARN_ON_ONCE(!pops))
+ return false;
+
+ /* Is the target domain bus token supported ? */
+ switch(info->bus_token) {
+ default:
+ /*
+ * This should never be reached. See
+ * gic_msi_lib_irq_domain_select()
+ */
+ WARN_ON_ONCE(1);
+ return false;
+ }
+
+ /*
+ * Mask out the domain specific MSI feature flags which are not
+ * supported by the real parent.
+ */
+ info->flags &= pops->supported_flags;
+ /* Enforce the required flags */
+ info->flags |= pops->required_flags;
+
+ /* Chip updates for all child bus types */
+ if (!info->chip->irq_eoi)
+ info->chip->irq_eoi = irq_chip_eoi_parent;
+
+ /*
+ * The device MSI domain can never have a set affinity callback it
+ * always has to rely on the parent domain to handle affinity
+ * settings. The device MSI domain just has to write the resulting
+ * MSI message into the hardware which is the whole purpose of the
+ * device MSI domain aside of mask/unmask which is provided e.g. by
+ * PCI/MSI device domains.
+ */
+ info->chip->irq_set_affinity = msi_domain_set_affinity;
+ return true;
+}
+EXPORT_SYMBOL_GPL(gic_msi_lib_init_dev_msi_info);
+
+/**
+ * gic_msi_lib_irq_domain_select - Shared select function for NEXUS domains
+ * @d: Pointer to the irq domain on which select is invoked
+ * @fwspec: Firmware spec describing what is searched
+ * @bus_token: The bus token for which a matching irq domain is looked up
+ *
+ * Returns: %0 if @d is not what is being looked for
+ *
+ * %1 if @d is either the domain which is directly searched for or
+ * if @d is providing the parent MSI domain for the functionality
+ * requested with @bus_token.
+ */
+int gic_msi_lib_irq_domain_select(struct irq_domain *d, struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ const struct msi_parent_ops *ops = d->msi_parent_ops;
+ u32 busmask = BIT(bus_token);
+
+ if (fwspec->fwnode != d->fwnode || fwspec->param_count != 0)
+ return 0;
+
+ /* Handle pure domain searches */
+ if (bus_token == ops->bus_select_token)
+ return 1;
+
+ return ops && !!(ops->bus_select_mask & busmask);
+}
+EXPORT_SYMBOL_GPL(gic_msi_lib_irq_domain_select);
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2022 Linutronix GmbH
+// Copyright (C) 2022 Intel
+
+#ifndef _DRIVERS_IRQCHIP_IRQ_GIC_MSI_LIB_H
+#define _DRIVERS_IRQCHIP_IRQ_GIC_MSI_LIB_H
+
+#include <linux/bits.h>
+#include <linux/irqdomain.h>
+#include <linux/msi.h>
+
+int gic_msi_lib_irq_domain_select(struct irq_domain *d, struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token);
+
+bool gic_msi_lib_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
+ struct irq_domain *real_parent,
+ struct msi_domain_info *info);
+
+#endif /* _DRIVERS_IRQCHIP_IRQ_GIC_MSI_LIB_H */
All irqdomains which provide MSI parent domain functionality for per device MSI domains need to provide a select() callback for the irqdomain and a function to initialize the child domain. Most of these functions would just be copy&pasta with minimal modifications, so provide a library function which implements the required functionality and is customizable via parent_domain::msi_parent_ops Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- V2: Export functions for modular irqchip drivers... --- drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 drivers/irqchip/irq-gic-msi-lib.c | 112 ++++++++++++++++++++++++++++++++++++++ drivers/irqchip/irq-gic-msi-lib.h | 19 ++++++ 4 files changed, 135 insertions(+)