new file mode 100644
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Bridge Common Properties
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+
+properties:
+ reg:
+ maxItems: 2
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: aclk
+ - const: aclk-perf
+ - const: hclk
+ - const: pm
+
+ num-lanes:
+ maximum: 4
+
+ phys:
+ oneOf:
+ - maxItems: 1
+ - maxItems: 4
+
+ phy-names:
+ oneOf:
+ - const: pcie-phy
+ - items:
+ - const: pcie-phy-0
+ - const: pcie-phy-1
+ - const: pcie-phy-2
+ - const: pcie-phy-3
+
+ resets:
+ maxItems: 7
+
+ reset-names:
+ items:
+ - const: core
+ - const: mgmt
+ - const: mgmt-sticky
+ - const: pipe
+ - const: pm
+ - const: pclk
+ - const: aclk
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - resets
+ - reset-names
+
+additionalProperties: true
+
+...
new file mode 100644
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Endpoint
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-ep.yaml#
+ - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+ compatible:
+ const: rockchip,rk3399-pcie-ep
+
+ reg: true
+
+ reg-names:
+ items:
+ - const: apb-base
+ - const: mem-base
+
+ rockchip,max-outbound-regions:
+ description: Maximum number of outbound regions
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 32
+ default: 32
+
+required:
+ - rockchip,max-outbound-regions
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/rk3399-cru.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie-ep@f8000000 {
+ compatible = "rockchip,rk3399-pcie-ep";
+ reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
+ reg-names = "apb-base", "mem-base";
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ max-functions = /bits/ 8 <8>;
+ num-lanes = <4>;
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+ phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+ rockchip,max-outbound-regions = <16>;
+ };
+ };
+...
new file mode 100644
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Root Port Bridge Host
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+ compatible:
+ const: rockchip,rk3399-pcie
+
+ reg: true
+
+ reg-names:
+ items:
+ - const: axi-base
+ - const: apb-base
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: sys
+ - const: legacy
+ - const: client
+
+ aspm-no-l0s:
+ description: This property is needed if using 24MHz OSC for RC's PHY.
+
+ ep-gpios:
+ description: pre-reset GPIO
+
+ vpcie12v-supply:
+ description: The 12v regulator to use for PCIe.
+
+ vpcie3v3-supply:
+ description: The 3.3v regulator to use for PCIe.
+
+ vpcie1v8-supply:
+ description: The 1.8v regulator to use for PCIe.
+
+ vpcie0v9-supply:
+ description: The 0.9v regulator to use for PCIe.
+
+ interrupt-controller:
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+required:
+ - ranges
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-controller
+ - interrupt-map
+ - interrupt-map-mask
+ - msi-map
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/rk3399-cru.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@f8000000 {
+ compatible = "rockchip,rk3399-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "legacy", "client";
+ ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+ 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+ num-lanes = <4>;
+ msi-map = <0x0 &its 0x0 0x1000>;
+ reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
+ reg-names = "axi-base", "apb-base";
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ /* deprecated legacy PHY model */
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreq>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 1>,
+ <0 0 0 3 &pcie0_intc 2>,
+ <0 0 0 4 &pcie0_intc 3>;
+
+ pcie0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+...
deleted file mode 100644
@@ -1,62 +0,0 @@
-* Rockchip AXI PCIe Endpoint Controller DT description
-
-Required properties:
-- compatible: Should contain "rockchip,rk3399-pcie-ep"
-- reg: Two register ranges as listed in the reg-names property
-- reg-names: Must include the following names
- - "apb-base"
- - "mem-base"
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - "aclk"
- - "aclk-perf"
- - "hclk"
- - "pm"
-- resets: Must contain seven entries for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following names
- - "core"
- - "mgmt"
- - "mgmt-sticky"
- - "pipe"
- - "pm"
- - "aclk"
- - "pclk"
-- pinctrl-names : The pin control state names
-- pinctrl-0: The "default" pinctrl state
-- phys: Must contain an phandle to a PHY for each entry in phy-names.
-- phy-names: Must include 4 entries for all 4 lanes even if some of
- them won't be used for your cases. Entries are of the form "pcie-phy-N":
- where N ranges from 0 to 3.
- (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
- for changing the #phy-cells of phy node to support it)
-- rockchip,max-outbound-regions: Maximum number of outbound regions
-
-Optional Property:
-- num-lanes: number of lanes to use
-- max-functions: Maximum number of functions that can be configured (default 1).
-
-pcie0-ep: pcie@f8000000 {
- compatible = "rockchip,rk3399-pcie-ep";
- #address-cells = <3>;
- #size-cells = <2>;
- rockchip,max-outbound-regions = <16>;
- clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
- <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
- clock-names = "aclk", "aclk-perf",
- "hclk", "pm";
- max-functions = /bits/ 8 <8>;
- num-lanes = <4>;
- reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
- reg-names = "apb-base", "mem-base";
- resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
- <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
- <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
- reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
- "pm", "pclk", "aclk";
- phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
- phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreq>;
-};
deleted file mode 100644
@@ -1,135 +0,0 @@
-* Rockchip AXI PCIe Root Port Bridge DT description
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-- compatible: Should contain "rockchip,rk3399-pcie"
-- reg: Two register ranges as listed in the reg-names property
-- reg-names: Must include the following names
- - "axi-base"
- - "apb-base"
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - "aclk"
- - "aclk-perf"
- - "hclk"
- - "pm"
-- msi-map: Maps a Requester ID to an MSI controller and associated
- msi-specifier data. See ./pci-msi.txt
-- interrupts: Three interrupt entries must be specified.
-- interrupt-names: Must include the following names
- - "sys"
- - "legacy"
- - "client"
-- resets: Must contain seven entries for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following names
- - "core"
- - "mgmt"
- - "mgmt-sticky"
- - "pipe"
- - "pm"
- - "aclk"
- - "pclk"
-- pinctrl-names : The pin control state names
-- pinctrl-0: The "default" pinctrl state
-- #interrupt-cells: specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-- interrupt-map-mask and interrupt-map: standard PCI properties
-
-Required properties for legacy PHY model (deprecated):
-- phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
-- phy-names: MUST be "pcie-phy".
-
-Required properties for per-lane PHY model (preferred):
-- phys: Must contain an phandle to a PHY for each entry in phy-names.
-- phy-names: Must include 4 entries for all 4 lanes even if some of
- them won't be used for your cases. Entries are of the form "pcie-phy-N":
- where N ranges from 0 to 3.
- (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
- for changing the #phy-cells of phy node to support it)
-
-Optional Property:
-- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if
- using 24MHz OSC for RC's PHY.
-- ep-gpios: contain the entry for pre-reset GPIO
-- num-lanes: number of lanes to use
-- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe.
-- vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe.
-- vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe.
-- vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe.
-
-*Interrupt controller child node*
-The core controller provides a single interrupt for legacy INTx. The PCIe node
-should contain an interrupt controller node as a target for the PCI
-'interrupt-map' property. This node represents the domain at which the four
-INTx interrupts are decoded and routed.
-
-
-Required properties for Interrupt controller child node:
-- interrupt-controller: identifies the node as an interrupt controller
-- #address-cells: specifies the number of cells needed to encode an
- address. The value must be 0.
-- #interrupt-cells: specifies the number of cells needed to encode an
- interrupt source. The value must be 1.
-
-Example:
-
-pcie0: pcie@f8000000 {
- compatible = "rockchip,rk3399-pcie";
- #address-cells = <3>;
- #size-cells = <2>;
- clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
- <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
- clock-names = "aclk", "aclk-perf",
- "hclk", "pm";
- bus-range = <0x0 0x1>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "legacy", "client";
- assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
- assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
- assigned-clock-rates = <100000000>;
- ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
- ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
- 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
- num-lanes = <4>;
- msi-map = <0x0 &its 0x0 0x1000>;
- reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
- reg-names = "axi-base", "apb-base";
- resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
- <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
- <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
- reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
- "pm", "pclk", "aclk";
- /* deprecated legacy PHY model */
- phys = <&pcie_phy>;
- phy-names = "pcie-phy";
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreq>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie0_intc 0>,
- <0 0 0 2 &pcie0_intc 1>,
- <0 0 0 3 &pcie0_intc 2>,
- <0 0 0 4 &pcie0_intc 3>;
- pcie0_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
-};
-
-pcie0: pcie@f8000000 {
- ...
-
- /* preferred per-lane PHY model */
- phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
- phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
-
- ...
-};
@@ -16309,7 +16309,7 @@ M: Shawn Lin <shawn.lin@rock-chips.com>
L: linux-pci@vger.kernel.org
L: linux-rockchip@lists.infradead.org
S: Maintained
-F: Documentation/devicetree/bindings/pci/rockchip-pcie*
+F: Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie*
F: drivers/pci/controller/pcie-rockchip*
PCIE DRIVER FOR SOCIONEXT UNIPHIER
Convert the Rockchip RK3399 PCIe Host/Endpoint controller to DT schema format. Like most dual mode PCI controllers, we need to split the schema into common, host and endpoint schemas. Signed-off-by: Rob Herring <robh@kernel.org> --- Shawn (or anyone from Rockchip), Note and please ack the license change. --- .../pci/rockchip,rk3399-pcie-common.yaml | 69 +++++++++ .../bindings/pci/rockchip,rk3399-pcie-ep.yaml | 68 +++++++++ .../bindings/pci/rockchip,rk3399-pcie.yaml | 132 +++++++++++++++++ .../bindings/pci/rockchip-pcie-ep.txt | 62 -------- .../bindings/pci/rockchip-pcie-host.txt | 135 ------------------ MAINTAINERS | 2 +- 6 files changed, 270 insertions(+), 198 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml create mode 100644 Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml create mode 100644 Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml delete mode 100644 Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt delete mode 100644 Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt