diff mbox series

[RESEND,v4,1/5] PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ

Message ID 20230111114059.6553-2-manivannan.sadhasivam@linaro.org (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: endpoint: Rework the EPC to EPF notification | expand

Commit Message

Manivannan Sadhasivam Jan. 11, 2023, 11:40 a.m. UTC
The "dra7xx-pcie-main" hard IRQ handler is just printing the IRQ status
and calling the dw_pcie_ep_linkup() API if LINK_UP status is set. But the
execution of dw_pcie_ep_linkup() depends on the EPF driver and may take
more time depending on the EPF implementation.

In general, hard IRQ handlers are supposed to return quickly and not block
for so long. Moreover, there is no real need of the current IRQ handler to
be a hard IRQ handler. So switch to the threaded IRQ handler for the
"dra7xx-pcie-main" IRQ.

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pci-dra7xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index 38462ed11d07..4ae807e7cf79 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -840,7 +840,7 @@  static int dra7xx_pcie_probe(struct platform_device *pdev)
 	}
 	dra7xx->mode = mode;
 
-	ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+	ret = devm_request_threaded_irq(dev, irq, NULL, dra7xx_pcie_irq_handler,
 			       IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
 	if (ret) {
 		dev_err(dev, "failed to request irq\n");