diff mbox series

[V3,2/2] PCI: loongson: Improve the MRRS quirk for LS7A

Message ID 20230201023803.660469-3-chenhuacai@loongson.cn (mailing list archive)
State Superseded
Headers show
Series PCI: Resolve Loongson's LS7A PCI problems | expand

Commit Message

Huacai Chen Feb. 1, 2023, 2:38 a.m. UTC
In new revision of LS7A, some PCIe ports support larger value than 256,
but their maximum supported MRRS values are not detectable. Moreover,
the current loongson_mrrs_quirk() cannot avoid devices increasing its
MRRS after pci_enable_device(), and some devices (e.g. Realtek 8169)
will actually set a big value in its driver. So the only possible way
is configure MRRS of all devices in BIOS, and add a pci host bridge bit
flag (i.e., no_inc_mrrs) to stop the increasing MRRS operations.

However, according to PCIe Spec, it is legal for an OS to program any
value for MRRS, and it is also legal for an endpoint to generate a Read
Request with any size up to its MRRS. As the hardware engineers say, the
root cause here is LS7A doesn't break up large read requests. In detail,
LS7A PCIe port reports CA (Completer Abort) if it receives a Memory Read
request with a size that's "too big" ("too big" means larger than the
PCIe ports can handle, which means 256 for some ports and 4096 for the
others, and of course this is a problem in the LS7A's hardware design).

Link: Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
---
 drivers/pci/controller/pci-loongson.c | 44 +++++++++------------------
 drivers/pci/pci.c                     |  6 ++++
 include/linux/pci.h                   |  1 +
 3 files changed, 22 insertions(+), 29 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
index 05c50408f13b..759ec211c17b 100644
--- a/drivers/pci/controller/pci-loongson.c
+++ b/drivers/pci/controller/pci-loongson.c
@@ -75,37 +75,23 @@  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
 			DEV_LS7A_LPC, system_bus_quirk);
 
-static void loongson_mrrs_quirk(struct pci_dev *dev)
+static void loongson_mrrs_quirk(struct pci_dev *pdev)
 {
-	struct pci_bus *bus = dev->bus;
-	struct pci_dev *bridge;
-	static const struct pci_device_id bridge_devids[] = {
-		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
-		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
-		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
-		{ 0, },
-	};
-
-	/* look for the matching bridge */
-	while (!pci_is_root_bus(bus)) {
-		bridge = bus->self;
-		bus = bus->parent;
-		/*
-		 * Some Loongson PCIe ports have a h/w limitation of
-		 * 256 bytes maximum read request size. They can't handle
-		 * anything larger than this. So force this limit on
-		 * any devices attached under these ports.
-		 */
-		if (pci_match_id(bridge_devids, bridge)) {
-			if (pcie_get_readrq(dev) > 256) {
-				pci_info(dev, "limiting MRRS to 256\n");
-				pcie_set_readrq(dev, 256);
-			}
-			break;
-		}
-	}
+	/*
+	 * Some Loongson PCIe ports have h/w limitations of maximum read
+	 * request size. They can't handle anything larger than this. So
+	 * force this limit on any devices attached under these ports.
+	 */
+	struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus);
+
+	bridge->no_inc_mrrs = 1;
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_0, loongson_mrrs_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_1, loongson_mrrs_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_2, loongson_mrrs_quirk);
 
 static void loongson_pci_pin_quirk(struct pci_dev *pdev)
 {
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index fba95486caaf..ae88210a12c7 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -6033,6 +6033,7 @@  int pcie_set_readrq(struct pci_dev *dev, int rq)
 {
 	u16 v;
 	int ret;
+	struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus);
 
 	if (rq < 128 || rq > 4096 || !is_power_of_2(rq))
 		return -EINVAL;
@@ -6051,6 +6052,11 @@  int pcie_set_readrq(struct pci_dev *dev, int rq)
 
 	v = (ffs(rq) - 8) << 12;
 
+	if (bridge->no_inc_mrrs) {
+		if (rq > pcie_get_readrq(dev))
+			return -EINVAL;
+	}
+
 	ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
 						  PCI_EXP_DEVCTL_READRQ, v);
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index adffd65e84b4..3df2049ec4a8 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -572,6 +572,7 @@  struct pci_host_bridge {
 	void		*release_data;
 	unsigned int	ignore_reset_delay:1;	/* For entire hierarchy */
 	unsigned int	no_ext_tags:1;		/* No Extended Tags */
+	unsigned int	no_inc_mrrs:1;		/* No Increase MRRS */
 	unsigned int	native_aer:1;		/* OS may use PCIe AER */
 	unsigned int	native_pcie_hotplug:1;	/* OS may use PCIe hotplug */
 	unsigned int	native_shpc_hotplug:1;	/* OS may use SHPC hotplug */