| Message ID | 20230210134917.2909314-6-yoshihiro.shimoda.uh@renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Krzysztof Wilczyński |
| Headers | show |
| Series | PCI: rcar-gen4: Add R-Car Gen4 PCIe support | expand |
On Fri, Feb 10, 2023 at 10:49:14PM +0900, Yoshihiro Shimoda wrote: > Add support for triggering legacy IRQs by using outbound ATU. I supposed a little more details would nice, like outbound iATU is utilized to send assert and de-assert INTx TLPs. The message is generated based on the payloadless Msg TLP with type 0x14, where 0x4 is the routing code implying the terminated at Receiver message. The message code is specified as b1000xx for the INTx assertion and b1001xx for the INTx de-assertion. Etc... > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > --- > .../pci/controller/dwc/pcie-designware-ep.c | 66 +++++++++++++++++-- > drivers/pci/controller/dwc/pcie-designware.c | 25 ++++--- > drivers/pci/controller/dwc/pcie-designware.h | 12 +++- > 3 files changed, 87 insertions(+), 16 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c > index 95efe14f1036..886483bf378b 100644 > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c > @@ -6,6 +6,7 @@ > * Author: Kishon Vijay Abraham I <kishon@ti.com> > */ > > +#include <linux/delay.h> > #include <linux/of.h> > #include <linux/platform_device.h> > > @@ -182,8 +183,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type, > return 0; > } > > -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, > - phys_addr_t phys_addr, > +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type, > + u8 code, u8 routing, phys_addr_t phys_addr, > u64 pci_addr, size_t size) > { > struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > @@ -196,8 +197,9 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, > return -EINVAL; > } > > - ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM, > - phys_addr, pci_addr, size); > + ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, type, > + code, routing, phys_addr, pci_addr, > + size); > if (ret) > return ret; > > @@ -306,7 +308,8 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no, > struct dw_pcie_ep *ep = epc_get_drvdata(epc); > struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > > - ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr, size); > + ret = dw_pcie_ep_outbound_atu(ep, func_no, PCIE_ATU_TYPE_MEM, 0, 0, > + addr, pci_addr, size); > if (ret) { > dev_err(pci->dev, "Failed to enable address\n"); > return ret; > @@ -479,11 +482,43 @@ static const struct pci_epc_ops epc_ops = { > .get_features = dw_pcie_ep_get_features, > }; > > +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8 code, > + u8 routing) > +{ > + struct pci_epc *epc = ep->epc; > + int ret; > + > + ret = dw_pcie_ep_outbound_atu(ep, func_no, PCIE_ATU_TYPE_MSG, code, > + routing, ep->intx_mem_phys, 0, > + epc->mem->window.page_size); > + if (ret) > + return ret; > + writel(0, ep->intx_mem); > + dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys); > + > + return 0; > +} > + > +static int __dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no, > + int intx) > +{ > + int ret; > + > + ret = dw_pcie_ep_send_msg(ep, func_no, PCIE_MSG_ASSERT_INTA + intx, 0x04); > + if (ret) > + return ret; > + usleep_range(1000, 2000); > + return dw_pcie_ep_send_msg(ep, func_no, PCIE_MSG_DEASSERT_INTA + intx, 0x04); > +} > + > int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no) > { > struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > struct device *dev = pci->dev; > > + if (ep->intx_by_atu) IMO the flag is redundant. Your implementation is generic enough to be useful for all the DW PCIe EPs. If you are afraid to break things, then just make it optional. If no outbound physical memory could be allocated then initialize intx_mem with NULL and move on with further initializations. As before the Legacy IRQ raise method shall return EINVAL in that case. > + return __dw_pcie_ep_raise_legacy_irq(ep, func_no, 0); > + > dev_err(dev, "EP cannot trigger legacy IRQs\n"); > > return -EINVAL; > @@ -617,6 +652,10 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep) > > dw_pcie_edma_remove(pci); > > + if (ep->intx_by_atu) > + pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem, > + epc->mem->window.page_size); > + > pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, > epc->mem->window.page_size); > > @@ -789,9 +828,19 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > goto err_exit_epc_mem; > } > > + if (ep->intx_by_atu) { > + ep->intx_mem = pci_epc_mem_alloc_addr(epc, &ep->intx_mem_phys, > + epc->mem->window.page_size); > + if (!ep->intx_mem) { > + ret = -ENOMEM; > + dev_err(dev, "Failed to reserve memory for INTx\n"); As I suggested above you can just dev_warn() here and move on with EP initialization. > + goto err_free_epc_mem; > + } > + } > + > ret = dw_pcie_edma_detect(pci); > if (ret) > - goto err_free_epc_mem; > + goto err_free_epc_mem_intx; > > if (ep->ops->get_features) { > epc_features = ep->ops->get_features(ep); > @@ -808,6 +857,11 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > err_remove_edma: > dw_pcie_edma_remove(pci); > > +err_free_epc_mem_intx: > + if (ep->intx_by_atu) > + pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem, > + epc->mem->window.page_size); > + > err_free_epc_mem: > pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, > epc->mem->window.page_size); > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c > index 53a16b8b6ac2..b4315cf84340 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.c > +++ b/drivers/pci/controller/dwc/pcie-designware.c > @@ -465,8 +465,8 @@ static inline u32 dw_pcie_enable_ecrc(u32 val) > } > > static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > - int index, int type, u64 cpu_addr, > - u64 pci_addr, u64 size) > + int index, int type, u8 code, u8 routing, > + u64 cpu_addr, u64 pci_addr, u64 size) The implementation gets to be too complicated especially with having nine arguments now. Seven args have been not that good either, but at the very least it was more-or-less coherent with respect to the Mem/IO outbound TLPs generations. Now in addition to that it will be also responsible for the MSG TLPs mapping. What we could simplify here is: < either 1. Drop separate routing arg. It can be merged into the type argument seeing it's a part of one by specification. Thus we'll have only eight arguments left. That will simplify the prototype, but not the implementation. < or 2. Split up the outbound mem/IO and MSG windows setups. In the later case you'll need only the next data for the MSG TLPs mapping: function #, MW index, message code, CPU base address, MW size. < or 3. Convert __dw_pcie_prog_outbound_atu() to accepting a dw_pcie_outbound_atu(-ish) structure with all the arguments listed as fields: MW index, function #, message type, routing type, message code (valid if MSG type specified), CPU base address, PCIe base address, MW size. What do you think? @Rob, @Bjorn? (Please don't forget to define the macros for the routing and message code values.) > { > u32 retries, val; > u64 limit_addr; > @@ -498,7 +498,7 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_TARGET, > upper_32_bits(pci_addr)); > > - val = type | PCIE_ATU_FUNC_NUM(func_no); > + val = type | routing | PCIE_ATU_FUNC_NUM(func_no); > if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) && > dw_pcie_ver_is_ge(pci, 460A)) > val |= PCIE_ATU_INCREASE_REGION_SIZE; > @@ -506,7 +506,14 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > val = dw_pcie_enable_ecrc(val); > dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL1, val); > > - dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE); > + if (code) > + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, > + PCIE_ATU_ENABLE | > + PCIE_ATU_INHIBIT_PAYLOAD | > + PCIE_ATU_HEADER_SUB_ENABLE | code); AFAICS the setup above is only specific to the Msg TLPs. If so then it would have been more generic to use if(type == ?) conditional statement here. What do you think? > + else > + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, > + PCIE_ATU_ENABLE); The next modification seems to be looking better in this case: + val = PCIE_ATU_ENABLE; + if (type == PCIE_ATU_TYPE_MSG) + val |= PCIE_ATU_INHIBIT_PAYLOAD | PCIE_ATU_HEADER_SUB_ENABLE | code; + + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, val); -Serge(y) > > /* > * Make sure ATU enable takes effect before any subsequent config > @@ -528,16 +535,16 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, > u64 cpu_addr, u64 pci_addr, u64 size) > { > - return __dw_pcie_prog_outbound_atu(pci, 0, index, type, > + return __dw_pcie_prog_outbound_atu(pci, 0, index, type, 0, 0, > cpu_addr, pci_addr, size); > } > > int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, > - int type, u64 cpu_addr, u64 pci_addr, > - u64 size) > + int type, u8 code, u8 routing, u64 cpu_addr, > + u64 pci_addr, u64 size) > { > - return __dw_pcie_prog_outbound_atu(pci, func_no, index, type, > - cpu_addr, pci_addr, size); > + return __dw_pcie_prog_outbound_atu(pci, func_no, index, type, code, > + routing, cpu_addr, pci_addr, size); > } > > static inline u32 dw_pcie_readl_atu_ib(struct dw_pcie *pci, u32 index, u32 reg) > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h > index 79713ce075cc..1a6e7e9489ee 100644 > --- a/drivers/pci/controller/dwc/pcie-designware.h > +++ b/drivers/pci/controller/dwc/pcie-designware.h > @@ -147,11 +147,14 @@ > #define PCIE_ATU_TYPE_IO 0x2 > #define PCIE_ATU_TYPE_CFG0 0x4 > #define PCIE_ATU_TYPE_CFG1 0x5 > +#define PCIE_ATU_TYPE_MSG 0x10 > #define PCIE_ATU_TD BIT(8) > #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20) > #define PCIE_ATU_REGION_CTRL2 0x004 > #define PCIE_ATU_ENABLE BIT(31) > #define PCIE_ATU_BAR_MODE_ENABLE BIT(30) > +#define PCIE_ATU_INHIBIT_PAYLOAD BIT(22) > +#define PCIE_ATU_HEADER_SUB_ENABLE BIT(21) > #define PCIE_ATU_FUNC_NUM_MATCH_EN BIT(19) > #define PCIE_ATU_LOWER_BASE 0x008 > #define PCIE_ATU_UPPER_BASE 0x00C > @@ -244,6 +247,9 @@ > /* Default eDMA LLP memory size */ > #define DMA_LLP_MEM_SIZE PAGE_SIZE > > +#define PCIE_MSG_ASSERT_INTA 0x20 > +#define PCIE_MSG_DEASSERT_INTA 0x24 > + > struct dw_pcie; > struct dw_pcie_rp; > struct dw_pcie_ep; > @@ -352,7 +358,10 @@ struct dw_pcie_ep { > unsigned long *ob_window_map; > void __iomem *msi_mem; > phys_addr_t msi_mem_phys; > + void __iomem *intx_mem; > + phys_addr_t intx_mem_phys; > struct pci_epf_bar *epf_bar[PCI_STD_NUM_BARS]; > + bool intx_by_atu; > }; > > struct dw_pcie_ops { > @@ -419,7 +428,8 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci); > int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, > u64 cpu_addr, u64 pci_addr, u64 size); > int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, > - int type, u64 cpu_addr, u64 pci_addr, u64 size); > + int type, u8 code, u8 routing, u64 cpu_addr, > + u64 pci_addr, u64 size); > int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type, > u64 cpu_addr, u64 pci_addr, u64 size); > int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index, > -- > 2.25.1 > >
Hi Serge, > From: Serge Semin, Sent: Thursday, February 16, 2023 12:19 AM > > On Fri, Feb 10, 2023 at 10:49:14PM +0900, Yoshihiro Shimoda wrote: > > Add support for triggering legacy IRQs by using outbound ATU. > > I supposed a little more details would nice, like outbound iATU is > utilized to send assert and de-assert INTx TLPs. The message is > generated based on the payloadless Msg TLP with type 0x14, where 0x4 > is the routing code implying the terminated at Receiver message. The > message code is specified as b1000xx for the INTx assertion and > b1001xx for the INTx de-assertion. Etc... Thank you for your comments. The descriptions are very nice to me. So, I'll add the descriptions. > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > --- > > .../pci/controller/dwc/pcie-designware-ep.c | 66 +++++++++++++++++-- > > drivers/pci/controller/dwc/pcie-designware.c | 25 ++++--- > > drivers/pci/controller/dwc/pcie-designware.h | 12 +++- > > 3 files changed, 87 insertions(+), 16 deletions(-) > > > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c > > index 95efe14f1036..886483bf378b 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c > > @@ -6,6 +6,7 @@ > > * Author: Kishon Vijay Abraham I <kishon@ti.com> > > */ > > > > +#include <linux/delay.h> > > #include <linux/of.h> > > #include <linux/platform_device.h> > > > > @@ -182,8 +183,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type, > > return 0; > > } > > > > -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, > > - phys_addr_t phys_addr, > > +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type, > > + u8 code, u8 routing, phys_addr_t phys_addr, > > u64 pci_addr, size_t size) > > { > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > > @@ -196,8 +197,9 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, > > return -EINVAL; > > } > > > > - ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM, > > - phys_addr, pci_addr, size); > > + ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, type, > > + code, routing, phys_addr, pci_addr, > > + size); > > if (ret) > > return ret; > > > > @@ -306,7 +308,8 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no, > > struct dw_pcie_ep *ep = epc_get_drvdata(epc); > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > > > > - ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr, size); > > + ret = dw_pcie_ep_outbound_atu(ep, func_no, PCIE_ATU_TYPE_MEM, 0, 0, > > + addr, pci_addr, size); > > if (ret) { > > dev_err(pci->dev, "Failed to enable address\n"); > > return ret; > > @@ -479,11 +482,43 @@ static const struct pci_epc_ops epc_ops = { > > .get_features = dw_pcie_ep_get_features, > > }; > > > > +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8 code, > > + u8 routing) > > +{ > > + struct pci_epc *epc = ep->epc; > > + int ret; > > + > > + ret = dw_pcie_ep_outbound_atu(ep, func_no, PCIE_ATU_TYPE_MSG, code, > > + routing, ep->intx_mem_phys, 0, > > + epc->mem->window.page_size); > > + if (ret) > > + return ret; > > + writel(0, ep->intx_mem); > > + dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys); > > + > > + return 0; > > +} > > + > > +static int __dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no, > > + int intx) > > +{ > > + int ret; > > + > > + ret = dw_pcie_ep_send_msg(ep, func_no, PCIE_MSG_ASSERT_INTA + intx, 0x04); > > + if (ret) > > + return ret; > > + usleep_range(1000, 2000); > > + return dw_pcie_ep_send_msg(ep, func_no, PCIE_MSG_DEASSERT_INTA + intx, 0x04); > > +} > > + > > int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no) > > { > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep); > > struct device *dev = pci->dev; > > > > > + if (ep->intx_by_atu) > > IMO the flag is redundant. Your implementation is generic enough to be > useful for all the DW PCIe EPs. If you are afraid to break things, Yes, I'm afraid to break things. > then just make it optional. If no outbound physical memory could be > allocated then initialize intx_mem with NULL and move on with further > initializations. As before the Legacy IRQ raise method shall return > EINVAL in that case. I got it. I'll modify this patch like that. > > + return __dw_pcie_ep_raise_legacy_irq(ep, func_no, 0); > > + > > dev_err(dev, "EP cannot trigger legacy IRQs\n"); > > > > return -EINVAL; > > @@ -617,6 +652,10 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep) > > > > dw_pcie_edma_remove(pci); > > > > + if (ep->intx_by_atu) > > + pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem, > > + epc->mem->window.page_size); > > + > > pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, > > epc->mem->window.page_size); > > > > @@ -789,9 +828,19 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > > goto err_exit_epc_mem; > > } > > > > > + if (ep->intx_by_atu) { > > + ep->intx_mem = pci_epc_mem_alloc_addr(epc, &ep->intx_mem_phys, > > + epc->mem->window.page_size); > > + if (!ep->intx_mem) { > > + ret = -ENOMEM; > > + dev_err(dev, "Failed to reserve memory for INTx\n"); > > As I suggested above you can just dev_warn() here and move on with > EP initialization. I got it. > > + goto err_free_epc_mem; > > + } > > + } > > + > > ret = dw_pcie_edma_detect(pci); > > if (ret) > > - goto err_free_epc_mem; > > + goto err_free_epc_mem_intx; > > > > if (ep->ops->get_features) { > > epc_features = ep->ops->get_features(ep); > > @@ -808,6 +857,11 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) > > err_remove_edma: > > dw_pcie_edma_remove(pci); > > > > +err_free_epc_mem_intx: > > + if (ep->intx_by_atu) > > + pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem, > > + epc->mem->window.page_size); > > + > > err_free_epc_mem: > > pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, > > epc->mem->window.page_size); > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c > > index 53a16b8b6ac2..b4315cf84340 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware.c > > +++ b/drivers/pci/controller/dwc/pcie-designware.c > > @@ -465,8 +465,8 @@ static inline u32 dw_pcie_enable_ecrc(u32 val) > > } > > > > > static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > > - int index, int type, u64 cpu_addr, > > - u64 pci_addr, u64 size) > > + int index, int type, u8 code, u8 routing, > > + u64 cpu_addr, u64 pci_addr, u64 size) > > The implementation gets to be too complicated especially with having > nine arguments now. Seven args have been not that good either, but at > the very least it was more-or-less coherent with respect to the Mem/IO > outbound TLPs generations. Now in addition to that it will be also > responsible for the MSG TLPs mapping. What we could simplify here is: > > < either 1. Drop separate routing arg. It can be merged into the type > argument seeing it's a part of one by specification. Thus we'll have > only eight arguments left. That will simplify the prototype, but not > the implementation. > > < or 2. Split up the outbound mem/IO and MSG windows setups. > In the later case you'll need only the next data for the MSG TLPs > mapping: function #, MW index, message code, CPU base address, MW size. > > < or 3. Convert __dw_pcie_prog_outbound_atu() to accepting a > dw_pcie_outbound_atu(-ish) structure with all the arguments listed as > fields: MW index, function #, message type, routing type, message > code (valid if MSG type specified), CPU base address, PCIe base > address, MW size. > > What do you think? @Rob, @Bjorn? I don't have a strong opinion, but I prefer the 3 above. > (Please don't forget to define the macros for the routing and message > code values.) > > > { > > u32 retries, val; > > u64 limit_addr; > > @@ -498,7 +498,7 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > > dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_TARGET, > > upper_32_bits(pci_addr)); > > > > - val = type | PCIE_ATU_FUNC_NUM(func_no); > > + val = type | routing | PCIE_ATU_FUNC_NUM(func_no); > > if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) && > > dw_pcie_ver_is_ge(pci, 460A)) > > val |= PCIE_ATU_INCREASE_REGION_SIZE; > > @@ -506,7 +506,14 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > > val = dw_pcie_enable_ecrc(val); > > dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL1, val); > > > > - dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE); > > > + if (code) > > + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, > > + PCIE_ATU_ENABLE | > > + PCIE_ATU_INHIBIT_PAYLOAD | > > + PCIE_ATU_HEADER_SUB_ENABLE | code); > > AFAICS the setup above is only specific to the Msg TLPs. If so then it > would have been more generic to use if(type == ?) conditional > statement here. What do you think? > > > + else > > + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, > > + PCIE_ATU_ENABLE); > > The next modification seems to be looking better in this case: > + val = PCIE_ATU_ENABLE; > + if (type == PCIE_ATU_TYPE_MSG) > + val |= PCIE_ATU_INHIBIT_PAYLOAD | PCIE_ATU_HEADER_SUB_ENABLE | code; > + > + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, val); Thank you for the suggestion. It looks better than my patch. So, I'll modify it. Best regards, Yoshihiro Shimoda > -Serge(y) > > > > > /* > > * Make sure ATU enable takes effect before any subsequent config > > @@ -528,16 +535,16 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, > > int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, > > u64 cpu_addr, u64 pci_addr, u64 size) > > { > > - return __dw_pcie_prog_outbound_atu(pci, 0, index, type, > > + return __dw_pcie_prog_outbound_atu(pci, 0, index, type, 0, 0, > > cpu_addr, pci_addr, size); > > } > > > > int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, > > - int type, u64 cpu_addr, u64 pci_addr, > > - u64 size) > > + int type, u8 code, u8 routing, u64 cpu_addr, > > + u64 pci_addr, u64 size) > > { > > - return __dw_pcie_prog_outbound_atu(pci, func_no, index, type, > > - cpu_addr, pci_addr, size); > > + return __dw_pcie_prog_outbound_atu(pci, func_no, index, type, code, > > + routing, cpu_addr, pci_addr, size); > > } > > > > static inline u32 dw_pcie_readl_atu_ib(struct dw_pcie *pci, u32 index, u32 reg) > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h > > index 79713ce075cc..1a6e7e9489ee 100644 > > --- a/drivers/pci/controller/dwc/pcie-designware.h > > +++ b/drivers/pci/controller/dwc/pcie-designware.h > > @@ -147,11 +147,14 @@ > > #define PCIE_ATU_TYPE_IO 0x2 > > #define PCIE_ATU_TYPE_CFG0 0x4 > > #define PCIE_ATU_TYPE_CFG1 0x5 > > +#define PCIE_ATU_TYPE_MSG 0x10 > > #define PCIE_ATU_TD BIT(8) > > #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20) > > #define PCIE_ATU_REGION_CTRL2 0x004 > > #define PCIE_ATU_ENABLE BIT(31) > > #define PCIE_ATU_BAR_MODE_ENABLE BIT(30) > > +#define PCIE_ATU_INHIBIT_PAYLOAD BIT(22) > > +#define PCIE_ATU_HEADER_SUB_ENABLE BIT(21) > > #define PCIE_ATU_FUNC_NUM_MATCH_EN BIT(19) > > #define PCIE_ATU_LOWER_BASE 0x008 > > #define PCIE_ATU_UPPER_BASE 0x00C > > @@ -244,6 +247,9 @@ > > /* Default eDMA LLP memory size */ > > #define DMA_LLP_MEM_SIZE PAGE_SIZE > > > > +#define PCIE_MSG_ASSERT_INTA 0x20 > > +#define PCIE_MSG_DEASSERT_INTA 0x24 > > + > > struct dw_pcie; > > struct dw_pcie_rp; > > struct dw_pcie_ep; > > @@ -352,7 +358,10 @@ struct dw_pcie_ep { > > unsigned long *ob_window_map; > > void __iomem *msi_mem; > > phys_addr_t msi_mem_phys; > > + void __iomem *intx_mem; > > + phys_addr_t intx_mem_phys; > > struct pci_epf_bar *epf_bar[PCI_STD_NUM_BARS]; > > + bool intx_by_atu; > > }; > > > > struct dw_pcie_ops { > > @@ -419,7 +428,8 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci); > > int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, > > u64 cpu_addr, u64 pci_addr, u64 size); > > int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, > > - int type, u64 cpu_addr, u64 pci_addr, u64 size); > > + int type, u8 code, u8 routing, u64 cpu_addr, > > + u64 pci_addr, u64 size); > > int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type, > > u64 cpu_addr, u64 pci_addr, u64 size); > > int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index, > > -- > > 2.25.1 > > > >
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index 95efe14f1036..886483bf378b 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -6,6 +6,7 @@ * Author: Kishon Vijay Abraham I <kishon@ti.com> */ +#include <linux/delay.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -182,8 +183,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type, return 0; } -static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, - phys_addr_t phys_addr, +static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type, + u8 code, u8 routing, phys_addr_t phys_addr, u64 pci_addr, size_t size) { struct dw_pcie *pci = to_dw_pcie_from_ep(ep); @@ -196,8 +197,9 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no, return -EINVAL; } - ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, PCIE_ATU_TYPE_MEM, - phys_addr, pci_addr, size); + ret = dw_pcie_prog_ep_outbound_atu(pci, func_no, free_win, type, + code, routing, phys_addr, pci_addr, + size); if (ret) return ret; @@ -306,7 +308,8 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no, struct dw_pcie_ep *ep = epc_get_drvdata(epc); struct dw_pcie *pci = to_dw_pcie_from_ep(ep); - ret = dw_pcie_ep_outbound_atu(ep, func_no, addr, pci_addr, size); + ret = dw_pcie_ep_outbound_atu(ep, func_no, PCIE_ATU_TYPE_MEM, 0, 0, + addr, pci_addr, size); if (ret) { dev_err(pci->dev, "Failed to enable address\n"); return ret; @@ -479,11 +482,43 @@ static const struct pci_epc_ops epc_ops = { .get_features = dw_pcie_ep_get_features, }; +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8 code, + u8 routing) +{ + struct pci_epc *epc = ep->epc; + int ret; + + ret = dw_pcie_ep_outbound_atu(ep, func_no, PCIE_ATU_TYPE_MSG, code, + routing, ep->intx_mem_phys, 0, + epc->mem->window.page_size); + if (ret) + return ret; + writel(0, ep->intx_mem); + dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys); + + return 0; +} + +static int __dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no, + int intx) +{ + int ret; + + ret = dw_pcie_ep_send_msg(ep, func_no, PCIE_MSG_ASSERT_INTA + intx, 0x04); + if (ret) + return ret; + usleep_range(1000, 2000); + return dw_pcie_ep_send_msg(ep, func_no, PCIE_MSG_DEASSERT_INTA + intx, 0x04); +} + int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no) { struct dw_pcie *pci = to_dw_pcie_from_ep(ep); struct device *dev = pci->dev; + if (ep->intx_by_atu) + return __dw_pcie_ep_raise_legacy_irq(ep, func_no, 0); + dev_err(dev, "EP cannot trigger legacy IRQs\n"); return -EINVAL; @@ -617,6 +652,10 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep) dw_pcie_edma_remove(pci); + if (ep->intx_by_atu) + pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem, + epc->mem->window.page_size); + pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, epc->mem->window.page_size); @@ -789,9 +828,19 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) goto err_exit_epc_mem; } + if (ep->intx_by_atu) { + ep->intx_mem = pci_epc_mem_alloc_addr(epc, &ep->intx_mem_phys, + epc->mem->window.page_size); + if (!ep->intx_mem) { + ret = -ENOMEM; + dev_err(dev, "Failed to reserve memory for INTx\n"); + goto err_free_epc_mem; + } + } + ret = dw_pcie_edma_detect(pci); if (ret) - goto err_free_epc_mem; + goto err_free_epc_mem_intx; if (ep->ops->get_features) { epc_features = ep->ops->get_features(ep); @@ -808,6 +857,11 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep) err_remove_edma: dw_pcie_edma_remove(pci); +err_free_epc_mem_intx: + if (ep->intx_by_atu) + pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem, + epc->mem->window.page_size); + err_free_epc_mem: pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem, epc->mem->window.page_size); diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 53a16b8b6ac2..b4315cf84340 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -465,8 +465,8 @@ static inline u32 dw_pcie_enable_ecrc(u32 val) } static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, - int index, int type, u64 cpu_addr, - u64 pci_addr, u64 size) + int index, int type, u8 code, u8 routing, + u64 cpu_addr, u64 pci_addr, u64 size) { u32 retries, val; u64 limit_addr; @@ -498,7 +498,7 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_TARGET, upper_32_bits(pci_addr)); - val = type | PCIE_ATU_FUNC_NUM(func_no); + val = type | routing | PCIE_ATU_FUNC_NUM(func_no); if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) && dw_pcie_ver_is_ge(pci, 460A)) val |= PCIE_ATU_INCREASE_REGION_SIZE; @@ -506,7 +506,14 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, val = dw_pcie_enable_ecrc(val); dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL1, val); - dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE); + if (code) + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, + PCIE_ATU_ENABLE | + PCIE_ATU_INHIBIT_PAYLOAD | + PCIE_ATU_HEADER_SUB_ENABLE | code); + else + dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, + PCIE_ATU_ENABLE); /* * Make sure ATU enable takes effect before any subsequent config @@ -528,16 +535,16 @@ static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, u64 cpu_addr, u64 pci_addr, u64 size) { - return __dw_pcie_prog_outbound_atu(pci, 0, index, type, + return __dw_pcie_prog_outbound_atu(pci, 0, index, type, 0, 0, cpu_addr, pci_addr, size); } int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, - int type, u64 cpu_addr, u64 pci_addr, - u64 size) + int type, u8 code, u8 routing, u64 cpu_addr, + u64 pci_addr, u64 size) { - return __dw_pcie_prog_outbound_atu(pci, func_no, index, type, - cpu_addr, pci_addr, size); + return __dw_pcie_prog_outbound_atu(pci, func_no, index, type, code, + routing, cpu_addr, pci_addr, size); } static inline u32 dw_pcie_readl_atu_ib(struct dw_pcie *pci, u32 index, u32 reg) diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 79713ce075cc..1a6e7e9489ee 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -147,11 +147,14 @@ #define PCIE_ATU_TYPE_IO 0x2 #define PCIE_ATU_TYPE_CFG0 0x4 #define PCIE_ATU_TYPE_CFG1 0x5 +#define PCIE_ATU_TYPE_MSG 0x10 #define PCIE_ATU_TD BIT(8) #define PCIE_ATU_FUNC_NUM(pf) ((pf) << 20) #define PCIE_ATU_REGION_CTRL2 0x004 #define PCIE_ATU_ENABLE BIT(31) #define PCIE_ATU_BAR_MODE_ENABLE BIT(30) +#define PCIE_ATU_INHIBIT_PAYLOAD BIT(22) +#define PCIE_ATU_HEADER_SUB_ENABLE BIT(21) #define PCIE_ATU_FUNC_NUM_MATCH_EN BIT(19) #define PCIE_ATU_LOWER_BASE 0x008 #define PCIE_ATU_UPPER_BASE 0x00C @@ -244,6 +247,9 @@ /* Default eDMA LLP memory size */ #define DMA_LLP_MEM_SIZE PAGE_SIZE +#define PCIE_MSG_ASSERT_INTA 0x20 +#define PCIE_MSG_DEASSERT_INTA 0x24 + struct dw_pcie; struct dw_pcie_rp; struct dw_pcie_ep; @@ -352,7 +358,10 @@ struct dw_pcie_ep { unsigned long *ob_window_map; void __iomem *msi_mem; phys_addr_t msi_mem_phys; + void __iomem *intx_mem; + phys_addr_t intx_mem_phys; struct pci_epf_bar *epf_bar[PCI_STD_NUM_BARS]; + bool intx_by_atu; }; struct dw_pcie_ops { @@ -419,7 +428,8 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci); int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, u64 cpu_addr, u64 pci_addr, u64 size); int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, - int type, u64 cpu_addr, u64 pci_addr, u64 size); + int type, u8 code, u8 routing, u64 cpu_addr, + u64 pci_addr, u64 size); int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type, u64 cpu_addr, u64 pci_addr, u64 size); int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
Add support for triggering legacy IRQs by using outbound ATU. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- .../pci/controller/dwc/pcie-designware-ep.c | 66 +++++++++++++++++-- drivers/pci/controller/dwc/pcie-designware.c | 25 ++++--- drivers/pci/controller/dwc/pcie-designware.h | 12 +++- 3 files changed, 87 insertions(+), 16 deletions(-)