diff mbox series

[v4,6/8] PCI: armada8k: support reg regions according to DT.

Message ID 20230313124016.17102-7-enachman@marvell.com (mailing list archive)
State Changes Requested
Delegated to: Krzysztof Wilczyński
Headers show
Series PCI: dwc: Add support for Marvell AC5 SoC | expand

Commit Message

Elad Nachman March 13, 2023, 12:40 p.m. UTC 
From: Elad Nachman <enachman@marvell.com>

Support atu/vendor registers regions start according to DT rather than using
inflexible offset arithmetics.

Signed-off-by: Elad Nachman <enachman@marvell.com>
---
v4:
   Split from previous patch in series

 drivers/pci/controller/dwc/pcie-armada8k.c | 30 ++++++++++++++--------
 1 file changed, 19 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-armada8k.c b/drivers/pci/controller/dwc/pcie-armada8k.c
index 2b94e32853ad..145434c7a9fb 100644
--- a/drivers/pci/controller/dwc/pcie-armada8k.c
+++ b/drivers/pci/controller/dwc/pcie-armada8k.c
@@ -46,7 +46,7 @@  struct armada8k_pcie_of_data {
 	const struct dw_pcie_ops *pcie_ops;
 };
 
-#define PCIE_VENDOR_REGS_OFFSET		0x8000	/* in ac5 is 0x10000 */
+#define PCIE_VENDOR_REGS_OFFSET		0x8000	/* in ac5 is in another region */
 
 #define PCIE_GLOBAL_CONTROL_REG		(PCIE_VENDOR_REGS_OFFSET + 0x0)
 #define PCIE_APP_LTSSM_EN		BIT(2)
@@ -314,24 +314,29 @@  static int armada8k_add_pcie_port(struct armada8k_pcie *pcie,
 	return 0;
 }
 
-static u32 ac5_xlate_dbi_reg(u32 reg)
+static void __iomem *ac5_xlate_dbi_reg(struct dw_pcie *pci,
+				       void __iomem *base,
+				       u32 reg)
 {
 	/* Handle AC5 ATU access */
 	if ((reg & ~0xfffff) == PCIE_ATU_ACCESS_MASK_AC5) {
 		reg &= 0xfffff;
-		/* ATU registers offset is 0xC00 + 0x200 * n,
+		/* ATU registers offset is 0xC000 + 0x200 * n,
 		 * from RFU registers.
 		 */
-		reg = 0xc000 | (0x200 * (reg >> 9)) | (reg & 0xff);
+		reg = (0x200 * (reg >> 9)) | (reg & 0xff);
+		return pci->atu_base + reg;
 	} else if ((reg & 0xfffff000) == PCIE_VENDOR_REGS_OFFSET) {
 		/* PCIe RFU registers in A8K are at offset 0x8000 from base
 		 * (0xf2600000) while in AC5 offset is 0x10000 from base
-		 * (0x800a0000) therefore need the addition of 0x8000.
+		 * (0x800a0000) therefore need to be reduced by 0x8000
+		 * and rebased from dbi2 base, which is set to the PCIe rfu
+		 * base in the AC5 dts:
 		 */
-		reg += PCIE_VENDOR_REGS_OFFSET;
+		reg -= PCIE_VENDOR_REGS_OFFSET;
+		return pci->dbi_base2 + reg;
 	}
-
-	return reg;
+	return base + reg;
 }
 
 static u32 ac5_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
@@ -339,14 +344,14 @@  static u32 ac5_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
 {
 	u32 val;
 
-	dw_pcie_read(base + ac5_xlate_dbi_reg(reg), size, &val);
+	dw_pcie_read(ac5_xlate_dbi_reg(pci, base, reg), size, &val);
 	return val;
 }
 
 static void ac5_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
 			       u32 reg, size_t size, u32 val)
 {
-	dw_pcie_write(base + ac5_xlate_dbi_reg(reg), size, val);
+	dw_pcie_write(ac5_xlate_dbi_reg(pci, base, reg), size, val);
 }
 
 static const struct dw_pcie_ops armada8k_dw_pcie_ops = {
@@ -425,7 +430,6 @@  static int armada8k_pcie_probe(struct platform_device *pdev)
 		ret = PTR_ERR(pci->dbi_base);
 		goto fail_clkreg;
 	}
-
 	ret = armada8k_pcie_setup_phys(pcie);
 	if (ret)
 		goto fail_clkreg;
@@ -436,6 +440,10 @@  static int armada8k_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_phy;
 
+	/* backwards compatibility with older dts files: */
+	if (!pci->dbi_base2)
+		pci->dbi_base2 = pci->dbi_base;
+
 	return 0;
 
 disable_phy: