diff mbox series

[v3,03/38] char: impi, tpm: depend on HAS_IOPORT

Message ID 20230314121216.413434-4-schnelle@linux.ibm.com (mailing list archive)
State Handled Elsewhere
Headers show
Series Kconfig: Introduce HAS_IOPORT config option | expand

Commit Message

Niklas Schnelle March 14, 2023, 12:11 p.m. UTC
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add this dependency and ifdef
sections of code using inb()/outb() as alternative access methods.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
 drivers/char/Kconfig             |  3 ++-
 drivers/char/ipmi/Makefile       | 11 ++++-------
 drivers/char/ipmi/ipmi_si_intf.c |  3 ++-
 drivers/char/ipmi/ipmi_si_pci.c  |  3 +++
 drivers/char/pcmcia/Kconfig      |  8 ++++----
 drivers/char/tpm/Kconfig         |  1 +
 drivers/char/tpm/tpm_infineon.c  | 14 ++++++++++----
 drivers/char/tpm/tpm_tis_core.c  | 19 ++++++++-----------
 8 files changed, 34 insertions(+), 28 deletions(-)

Comments

Jarkko Sakkinen March 14, 2023, 12:20 p.m. UTC | #1
On Tue, Mar 14, 2023 at 01:11:41PM +0100, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add this dependency and ifdef
> sections of code using inb()/outb() as alternative access methods.
> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
>  drivers/char/Kconfig             |  3 ++-
>  drivers/char/ipmi/Makefile       | 11 ++++-------
>  drivers/char/ipmi/ipmi_si_intf.c |  3 ++-
>  drivers/char/ipmi/ipmi_si_pci.c  |  3 +++
>  drivers/char/pcmcia/Kconfig      |  8 ++++----
>  drivers/char/tpm/Kconfig         |  1 +
>  drivers/char/tpm/tpm_infineon.c  | 14 ++++++++++----
>  drivers/char/tpm/tpm_tis_core.c  | 19 ++++++++-----------
>  8 files changed, 34 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
> index 30fe9848dac1..c34679c6da70 100644
> --- a/drivers/char/Kconfig
> +++ b/drivers/char/Kconfig
> @@ -34,6 +34,7 @@ config TTY_PRINTK_LEVEL
>  config PRINTER
>  	tristate "Parallel printer support"
>  	depends on PARPORT
> +	depends on HAS_IOPORT
>  	help
>  	  If you intend to attach a printer to the parallel port of your Linux
>  	  box (as opposed to using a serial printer; if the connector at the
> @@ -342,7 +343,7 @@ config NVRAM
>  
>  config DEVPORT
>  	bool "/dev/port character device"
> -	depends on ISA || PCI
> +	depends on HAS_IOPORT
>  	default y
>  	help
>  	  Say Y here if you want to support the /dev/port device. The /dev/port
> diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
> index cb6138b8ded9..e0944547c9d0 100644
> --- a/drivers/char/ipmi/Makefile
> +++ b/drivers/char/ipmi/Makefile
> @@ -5,13 +5,10 @@
>  
>  ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o \
>  	ipmi_si_hotmod.o ipmi_si_hardcode.o ipmi_si_platform.o \
> -	ipmi_si_port_io.o ipmi_si_mem_io.o
> -ifdef CONFIG_PCI
> -ipmi_si-y += ipmi_si_pci.o
> -endif
> -ifdef CONFIG_PARISC
> -ipmi_si-y += ipmi_si_parisc.o
> -endif
> +	ipmi_si_mem_io.o
> +ipmi_si-$(CONFIG_HAS_IOPORT) += ipmi_si_port_io.o
> +ipmi_si-$(CONFIG_PCI) += ipmi_si_pci.o
> +ipmi_si-$(CONFIG_PARISC) += ipmi_si_parisc.o
>  
>  obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
>  obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
> index abddd7e43a9a..edbbdb804913 100644
> --- a/drivers/char/ipmi/ipmi_si_intf.c
> +++ b/drivers/char/ipmi/ipmi_si_intf.c
> @@ -1882,7 +1882,8 @@ int ipmi_si_add_smi(struct si_sm_io *io)
>  	}
>  
>  	if (!io->io_setup) {
> -		if (io->addr_space == IPMI_IO_ADDR_SPACE) {
> +		if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
> +		    io->addr_space == IPMI_IO_ADDR_SPACE) {
>  			io->io_setup = ipmi_si_port_setup;
>  		} else if (io->addr_space == IPMI_MEM_ADDR_SPACE) {
>  			io->io_setup = ipmi_si_mem_setup;
> diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c
> index 74fa2055868b..b83d55685b22 100644
> --- a/drivers/char/ipmi/ipmi_si_pci.c
> +++ b/drivers/char/ipmi/ipmi_si_pci.c
> @@ -97,6 +97,9 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
>  	}
>  
>  	if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
> +		if (!IS_ENABLED(CONFIG_HAS_IOPORT))
> +			return -ENXIO;
> +
>  		io.addr_space = IPMI_IO_ADDR_SPACE;
>  		io.io_setup = ipmi_si_port_setup;
>  	} else {
> diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
> index f5d589b2be44..788422627b43 100644
> --- a/drivers/char/pcmcia/Kconfig
> +++ b/drivers/char/pcmcia/Kconfig
> @@ -8,7 +8,7 @@ menu "PCMCIA character devices"
>  
>  config SYNCLINK_CS
>  	tristate "SyncLink PC Card support"
> -	depends on PCMCIA && TTY
> +	depends on PCMCIA && TTY && HAS_IOPORT
>  	help
>  	  Enable support for the SyncLink PC Card serial adapter, running
>  	  asynchronous and HDLC communications up to 512Kbps. The port is
> @@ -21,7 +21,7 @@ config SYNCLINK_CS
>  
>  config CARDMAN_4000
>  	tristate "Omnikey Cardman 4000 support"
> -	depends on PCMCIA
> +	depends on PCMCIA && HAS_IOPORT
>  	select BITREVERSE
>  	help
>  	  Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard
> @@ -33,7 +33,7 @@ config CARDMAN_4000
>  
>  config CARDMAN_4040
>  	tristate "Omnikey CardMan 4040 support"
> -	depends on PCMCIA
> +	depends on PCMCIA && HAS_IOPORT
>  	help
>  	  Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
>  	  reader.
> @@ -57,7 +57,7 @@ config SCR24X
>  
>  config IPWIRELESS
>  	tristate "IPWireless 3G UMTS PCMCIA card support"
> -	depends on PCMCIA && NETDEVICES && TTY
> +	depends on PCMCIA && NETDEVICES && TTY && HAS_IOPORT
>  	select PPP
>  	help
>  	  This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> index 927088b2c3d3..418c9ed59ffd 100644
> --- a/drivers/char/tpm/Kconfig
> +++ b/drivers/char/tpm/Kconfig
> @@ -149,6 +149,7 @@ config TCG_NSC
>  config TCG_ATMEL
>  	tristate "Atmel TPM Interface"
>  	depends on PPC64 || HAS_IOPORT_MAP
> +	depends on HAS_IOPORT
>  	help
>  	  If you have a TPM security chip from Atmel say Yes and it 
>  	  will be accessible from within Linux.  To compile this driver 
> diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
> index 9c924a1440a9..2d2ae37153ba 100644
> --- a/drivers/char/tpm/tpm_infineon.c
> +++ b/drivers/char/tpm/tpm_infineon.c
> @@ -51,34 +51,40 @@ static struct tpm_inf_dev tpm_dev;
>  
>  static inline void tpm_data_out(unsigned char data, unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		outb(data, tpm_dev.data_regs + offset);
>  	else
> +#endif
>  		writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
>  }
>  
>  static inline unsigned char tpm_data_in(unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		return inb(tpm_dev.data_regs + offset);
> -	else
> -		return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
> +#endif
> +	return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
>  }
>  
>  static inline void tpm_config_out(unsigned char data, unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		outb(data, tpm_dev.config_port + offset);
>  	else
> +#endif
>  		writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
>  }
>  
>  static inline unsigned char tpm_config_in(unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		return inb(tpm_dev.config_port + offset);
> -	else
> -		return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
> +#endif
> +	return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
>  }
>  
>  /* TPM header definitions */
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 3f98e587b3e8..e43d2a1da3ea 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -897,11 +897,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
>  		clkrun_val &= ~LPC_CLKRUN_EN;
>  		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
>  
> -		/*
> -		 * Write any random value on port 0x80 which is on LPC, to make
> -		 * sure LPC clock is running before sending any TPM command.
> -		 */
> -		outb(0xCC, 0x80);
>  	} else {
>  		data->clkrun_enabled--;
>  		if (data->clkrun_enabled)
> @@ -912,13 +907,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
>  		/* Enable LPC CLKRUN# */
>  		clkrun_val |= LPC_CLKRUN_EN;
>  		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
> -
> -		/*
> -		 * Write any random value on port 0x80 which is on LPC, to make
> -		 * sure LPC clock is running before sending any TPM command.
> -		 */
> -		outb(0xCC, 0x80);
>  	}
> +
> +#ifdef CONFIG_HAS_IOPORT
> +	/*
> +	 * Write any random value on port 0x80 which is on LPC, to make
> +	 * sure LPC clock is running before sending any TPM command.
> +	 */
> +	outb(0xCC, 0x80);
> +#endif
>  }
>  
>  static const struct tpm_class_ops tpm_tis = {
> -- 
> 2.37.2
> 

Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>

Who should pick this?

BR, Jarkko
Corey Minyard March 14, 2023, 1:52 p.m. UTC | #2
On Tue, Mar 14, 2023 at 01:11:41PM +0100, Niklas Schnelle wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add this dependency and ifdef
> sections of code using inb()/outb() as alternative access methods.

For the IPMI portions, this looks good.

Acked-by: Corey Minyard <cminyard@mvista.com>

Thanks

-corey

> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
>  drivers/char/Kconfig             |  3 ++-
>  drivers/char/ipmi/Makefile       | 11 ++++-------
>  drivers/char/ipmi/ipmi_si_intf.c |  3 ++-
>  drivers/char/ipmi/ipmi_si_pci.c  |  3 +++
>  drivers/char/pcmcia/Kconfig      |  8 ++++----
>  drivers/char/tpm/Kconfig         |  1 +
>  drivers/char/tpm/tpm_infineon.c  | 14 ++++++++++----
>  drivers/char/tpm/tpm_tis_core.c  | 19 ++++++++-----------
>  8 files changed, 34 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
> index 30fe9848dac1..c34679c6da70 100644
> --- a/drivers/char/Kconfig
> +++ b/drivers/char/Kconfig
> @@ -34,6 +34,7 @@ config TTY_PRINTK_LEVEL
>  config PRINTER
>  	tristate "Parallel printer support"
>  	depends on PARPORT
> +	depends on HAS_IOPORT
>  	help
>  	  If you intend to attach a printer to the parallel port of your Linux
>  	  box (as opposed to using a serial printer; if the connector at the
> @@ -342,7 +343,7 @@ config NVRAM
>  
>  config DEVPORT
>  	bool "/dev/port character device"
> -	depends on ISA || PCI
> +	depends on HAS_IOPORT
>  	default y
>  	help
>  	  Say Y here if you want to support the /dev/port device. The /dev/port
> diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
> index cb6138b8ded9..e0944547c9d0 100644
> --- a/drivers/char/ipmi/Makefile
> +++ b/drivers/char/ipmi/Makefile
> @@ -5,13 +5,10 @@
>  
>  ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o \
>  	ipmi_si_hotmod.o ipmi_si_hardcode.o ipmi_si_platform.o \
> -	ipmi_si_port_io.o ipmi_si_mem_io.o
> -ifdef CONFIG_PCI
> -ipmi_si-y += ipmi_si_pci.o
> -endif
> -ifdef CONFIG_PARISC
> -ipmi_si-y += ipmi_si_parisc.o
> -endif
> +	ipmi_si_mem_io.o
> +ipmi_si-$(CONFIG_HAS_IOPORT) += ipmi_si_port_io.o
> +ipmi_si-$(CONFIG_PCI) += ipmi_si_pci.o
> +ipmi_si-$(CONFIG_PARISC) += ipmi_si_parisc.o
>  
>  obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
>  obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
> diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
> index abddd7e43a9a..edbbdb804913 100644
> --- a/drivers/char/ipmi/ipmi_si_intf.c
> +++ b/drivers/char/ipmi/ipmi_si_intf.c
> @@ -1882,7 +1882,8 @@ int ipmi_si_add_smi(struct si_sm_io *io)
>  	}
>  
>  	if (!io->io_setup) {
> -		if (io->addr_space == IPMI_IO_ADDR_SPACE) {
> +		if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
> +		    io->addr_space == IPMI_IO_ADDR_SPACE) {
>  			io->io_setup = ipmi_si_port_setup;
>  		} else if (io->addr_space == IPMI_MEM_ADDR_SPACE) {
>  			io->io_setup = ipmi_si_mem_setup;
> diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c
> index 74fa2055868b..b83d55685b22 100644
> --- a/drivers/char/ipmi/ipmi_si_pci.c
> +++ b/drivers/char/ipmi/ipmi_si_pci.c
> @@ -97,6 +97,9 @@ static int ipmi_pci_probe(struct pci_dev *pdev,
>  	}
>  
>  	if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
> +		if (!IS_ENABLED(CONFIG_HAS_IOPORT))
> +			return -ENXIO;
> +
>  		io.addr_space = IPMI_IO_ADDR_SPACE;
>  		io.io_setup = ipmi_si_port_setup;
>  	} else {
> diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
> index f5d589b2be44..788422627b43 100644
> --- a/drivers/char/pcmcia/Kconfig
> +++ b/drivers/char/pcmcia/Kconfig
> @@ -8,7 +8,7 @@ menu "PCMCIA character devices"
>  
>  config SYNCLINK_CS
>  	tristate "SyncLink PC Card support"
> -	depends on PCMCIA && TTY
> +	depends on PCMCIA && TTY && HAS_IOPORT
>  	help
>  	  Enable support for the SyncLink PC Card serial adapter, running
>  	  asynchronous and HDLC communications up to 512Kbps. The port is
> @@ -21,7 +21,7 @@ config SYNCLINK_CS
>  
>  config CARDMAN_4000
>  	tristate "Omnikey Cardman 4000 support"
> -	depends on PCMCIA
> +	depends on PCMCIA && HAS_IOPORT
>  	select BITREVERSE
>  	help
>  	  Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard
> @@ -33,7 +33,7 @@ config CARDMAN_4000
>  
>  config CARDMAN_4040
>  	tristate "Omnikey CardMan 4040 support"
> -	depends on PCMCIA
> +	depends on PCMCIA && HAS_IOPORT
>  	help
>  	  Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
>  	  reader.
> @@ -57,7 +57,7 @@ config SCR24X
>  
>  config IPWIRELESS
>  	tristate "IPWireless 3G UMTS PCMCIA card support"
> -	depends on PCMCIA && NETDEVICES && TTY
> +	depends on PCMCIA && NETDEVICES && TTY && HAS_IOPORT
>  	select PPP
>  	help
>  	  This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
> diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
> index 927088b2c3d3..418c9ed59ffd 100644
> --- a/drivers/char/tpm/Kconfig
> +++ b/drivers/char/tpm/Kconfig
> @@ -149,6 +149,7 @@ config TCG_NSC
>  config TCG_ATMEL
>  	tristate "Atmel TPM Interface"
>  	depends on PPC64 || HAS_IOPORT_MAP
> +	depends on HAS_IOPORT
>  	help
>  	  If you have a TPM security chip from Atmel say Yes and it 
>  	  will be accessible from within Linux.  To compile this driver 
> diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
> index 9c924a1440a9..2d2ae37153ba 100644
> --- a/drivers/char/tpm/tpm_infineon.c
> +++ b/drivers/char/tpm/tpm_infineon.c
> @@ -51,34 +51,40 @@ static struct tpm_inf_dev tpm_dev;
>  
>  static inline void tpm_data_out(unsigned char data, unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		outb(data, tpm_dev.data_regs + offset);
>  	else
> +#endif
>  		writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
>  }
>  
>  static inline unsigned char tpm_data_in(unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		return inb(tpm_dev.data_regs + offset);
> -	else
> -		return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
> +#endif
> +	return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
>  }
>  
>  static inline void tpm_config_out(unsigned char data, unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		outb(data, tpm_dev.config_port + offset);
>  	else
> +#endif
>  		writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
>  }
>  
>  static inline unsigned char tpm_config_in(unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		return inb(tpm_dev.config_port + offset);
> -	else
> -		return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
> +#endif
> +	return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
>  }
>  
>  /* TPM header definitions */
> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
> index 3f98e587b3e8..e43d2a1da3ea 100644
> --- a/drivers/char/tpm/tpm_tis_core.c
> +++ b/drivers/char/tpm/tpm_tis_core.c
> @@ -897,11 +897,6 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
>  		clkrun_val &= ~LPC_CLKRUN_EN;
>  		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
>  
> -		/*
> -		 * Write any random value on port 0x80 which is on LPC, to make
> -		 * sure LPC clock is running before sending any TPM command.
> -		 */
> -		outb(0xCC, 0x80);
>  	} else {
>  		data->clkrun_enabled--;
>  		if (data->clkrun_enabled)
> @@ -912,13 +907,15 @@ static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
>  		/* Enable LPC CLKRUN# */
>  		clkrun_val |= LPC_CLKRUN_EN;
>  		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
> -
> -		/*
> -		 * Write any random value on port 0x80 which is on LPC, to make
> -		 * sure LPC clock is running before sending any TPM command.
> -		 */
> -		outb(0xCC, 0x80);
>  	}
> +
> +#ifdef CONFIG_HAS_IOPORT
> +	/*
> +	 * Write any random value on port 0x80 which is on LPC, to make
> +	 * sure LPC clock is running before sending any TPM command.
> +	 */
> +	outb(0xCC, 0x80);
> +#endif
>  }
>  
>  static const struct tpm_class_ops tpm_tis = {
> -- 
> 2.37.2
>
Arnd Bergmann March 14, 2023, 2:01 p.m. UTC | #3
On Tue, Mar 14, 2023, at 13:20, Jarkko Sakkinen wrote:
> On Tue, Mar 14, 2023 at 01:11:41PM +0100, Niklas Schnelle wrote:

> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
>
> Who should pick this?

All patches in this series depend on patch 1, so either I merge
them all through the asm-generic tree, or I ask Linus to apply just
patch 1 for now, and then each subsystem can pick up their own
patches based on top of that.

    Arnd
Geert Uytterhoeven March 14, 2023, 2:17 p.m. UTC | #4
Hi Niklas,

On Tue, Mar 14, 2023 at 1:12 PM Niklas Schnelle <schnelle@linux.ibm.com> wrote:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add this dependency and ifdef
> sections of code using inb()/outb() as alternative access methods.
>
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>

Thanks for your patch!

> --- a/drivers/char/Kconfig
> +++ b/drivers/char/Kconfig
> @@ -34,6 +34,7 @@ config TTY_PRINTK_LEVEL
>  config PRINTER
>         tristate "Parallel printer support"
>         depends on PARPORT
> +       depends on HAS_IOPORT

This looks wrong to me.
drivers/char/lp.c uses the parport API, no direct I/O port access.

>         help
>           If you intend to attach a printer to the parallel port of your Linux
>           box (as opposed to using a serial printer; if the connector at the

Gr{oetje,eeting}s,

                        Geert
Arnd Bergmann March 14, 2023, 3:08 p.m. UTC | #5
On Tue, Mar 14, 2023, at 15:17, Geert Uytterhoeven wrote:
>> --- a/drivers/char/Kconfig
>> +++ b/drivers/char/Kconfig
>> @@ -34,6 +34,7 @@ config TTY_PRINTK_LEVEL
>>  config PRINTER
>>         tristate "Parallel printer support"
>>         depends on PARPORT
>> +       depends on HAS_IOPORT
>
> This looks wrong to me.
> drivers/char/lp.c uses the parport API, no direct I/O port access.

It looks like include/linux/parport.h requires I/O port access
when PARPORT_PC is enabled and PARPORT_NOT_PC is disabled.
Maybe this would work:

      depends on PARPORT
      depends on HAS_IOPORT || PARPORT_NOT_PC

       Arnd
Jason Gunthorpe March 21, 2023, 2:33 p.m. UTC | #6
On Tue, Mar 14, 2023 at 01:11:41PM +0100, Niklas Schnelle wrote:
> diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
> index 9c924a1440a9..2d2ae37153ba 100644
> --- a/drivers/char/tpm/tpm_infineon.c
> +++ b/drivers/char/tpm/tpm_infineon.c
> @@ -51,34 +51,40 @@ static struct tpm_inf_dev tpm_dev;
>  
>  static inline void tpm_data_out(unsigned char data, unsigned char offset)
>  {
> +#ifdef CONFIG_HAS_IOPORT
>  	if (tpm_dev.iotype == TPM_INF_IO_PORT)
>  		outb(data, tpm_dev.data_regs + offset);

You should ifdef away TPM_INF_IO_PORT as well

Jason
diff mbox series

Patch

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 30fe9848dac1..c34679c6da70 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -34,6 +34,7 @@  config TTY_PRINTK_LEVEL
 config PRINTER
 	tristate "Parallel printer support"
 	depends on PARPORT
+	depends on HAS_IOPORT
 	help
 	  If you intend to attach a printer to the parallel port of your Linux
 	  box (as opposed to using a serial printer; if the connector at the
@@ -342,7 +343,7 @@  config NVRAM
 
 config DEVPORT
 	bool "/dev/port character device"
-	depends on ISA || PCI
+	depends on HAS_IOPORT
 	default y
 	help
 	  Say Y here if you want to support the /dev/port device. The /dev/port
diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile
index cb6138b8ded9..e0944547c9d0 100644
--- a/drivers/char/ipmi/Makefile
+++ b/drivers/char/ipmi/Makefile
@@ -5,13 +5,10 @@ 
 
 ipmi_si-y := ipmi_si_intf.o ipmi_kcs_sm.o ipmi_smic_sm.o ipmi_bt_sm.o \
 	ipmi_si_hotmod.o ipmi_si_hardcode.o ipmi_si_platform.o \
-	ipmi_si_port_io.o ipmi_si_mem_io.o
-ifdef CONFIG_PCI
-ipmi_si-y += ipmi_si_pci.o
-endif
-ifdef CONFIG_PARISC
-ipmi_si-y += ipmi_si_parisc.o
-endif
+	ipmi_si_mem_io.o
+ipmi_si-$(CONFIG_HAS_IOPORT) += ipmi_si_port_io.o
+ipmi_si-$(CONFIG_PCI) += ipmi_si_pci.o
+ipmi_si-$(CONFIG_PARISC) += ipmi_si_parisc.o
 
 obj-$(CONFIG_IPMI_HANDLER) += ipmi_msghandler.o
 obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index abddd7e43a9a..edbbdb804913 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1882,7 +1882,8 @@  int ipmi_si_add_smi(struct si_sm_io *io)
 	}
 
 	if (!io->io_setup) {
-		if (io->addr_space == IPMI_IO_ADDR_SPACE) {
+		if (IS_ENABLED(CONFIG_HAS_IOPORT) &&
+		    io->addr_space == IPMI_IO_ADDR_SPACE) {
 			io->io_setup = ipmi_si_port_setup;
 		} else if (io->addr_space == IPMI_MEM_ADDR_SPACE) {
 			io->io_setup = ipmi_si_mem_setup;
diff --git a/drivers/char/ipmi/ipmi_si_pci.c b/drivers/char/ipmi/ipmi_si_pci.c
index 74fa2055868b..b83d55685b22 100644
--- a/drivers/char/ipmi/ipmi_si_pci.c
+++ b/drivers/char/ipmi/ipmi_si_pci.c
@@ -97,6 +97,9 @@  static int ipmi_pci_probe(struct pci_dev *pdev,
 	}
 
 	if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
+		if (!IS_ENABLED(CONFIG_HAS_IOPORT))
+			return -ENXIO;
+
 		io.addr_space = IPMI_IO_ADDR_SPACE;
 		io.io_setup = ipmi_si_port_setup;
 	} else {
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index f5d589b2be44..788422627b43 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -8,7 +8,7 @@  menu "PCMCIA character devices"
 
 config SYNCLINK_CS
 	tristate "SyncLink PC Card support"
-	depends on PCMCIA && TTY
+	depends on PCMCIA && TTY && HAS_IOPORT
 	help
 	  Enable support for the SyncLink PC Card serial adapter, running
 	  asynchronous and HDLC communications up to 512Kbps. The port is
@@ -21,7 +21,7 @@  config SYNCLINK_CS
 
 config CARDMAN_4000
 	tristate "Omnikey Cardman 4000 support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	select BITREVERSE
 	help
 	  Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard
@@ -33,7 +33,7 @@  config CARDMAN_4000
 
 config CARDMAN_4040
 	tristate "Omnikey CardMan 4040 support"
-	depends on PCMCIA
+	depends on PCMCIA && HAS_IOPORT
 	help
 	  Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
 	  reader.
@@ -57,7 +57,7 @@  config SCR24X
 
 config IPWIRELESS
 	tristate "IPWireless 3G UMTS PCMCIA card support"
-	depends on PCMCIA && NETDEVICES && TTY
+	depends on PCMCIA && NETDEVICES && TTY && HAS_IOPORT
 	select PPP
 	help
 	  This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index 927088b2c3d3..418c9ed59ffd 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -149,6 +149,7 @@  config TCG_NSC
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
 	depends on PPC64 || HAS_IOPORT_MAP
+	depends on HAS_IOPORT
 	help
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 9c924a1440a9..2d2ae37153ba 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -51,34 +51,40 @@  static struct tpm_inf_dev tpm_dev;
 
 static inline void tpm_data_out(unsigned char data, unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		outb(data, tpm_dev.data_regs + offset);
 	else
+#endif
 		writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset);
 }
 
 static inline unsigned char tpm_data_in(unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		return inb(tpm_dev.data_regs + offset);
-	else
-		return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
+#endif
+	return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset);
 }
 
 static inline void tpm_config_out(unsigned char data, unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		outb(data, tpm_dev.config_port + offset);
 	else
+#endif
 		writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset);
 }
 
 static inline unsigned char tpm_config_in(unsigned char offset)
 {
+#ifdef CONFIG_HAS_IOPORT
 	if (tpm_dev.iotype == TPM_INF_IO_PORT)
 		return inb(tpm_dev.config_port + offset);
-	else
-		return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
+#endif
+	return readb(tpm_dev.mem_base + tpm_dev.index_off + offset);
 }
 
 /* TPM header definitions */
diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index 3f98e587b3e8..e43d2a1da3ea 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -897,11 +897,6 @@  static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
 		clkrun_val &= ~LPC_CLKRUN_EN;
 		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
 
-		/*
-		 * Write any random value on port 0x80 which is on LPC, to make
-		 * sure LPC clock is running before sending any TPM command.
-		 */
-		outb(0xCC, 0x80);
 	} else {
 		data->clkrun_enabled--;
 		if (data->clkrun_enabled)
@@ -912,13 +907,15 @@  static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value)
 		/* Enable LPC CLKRUN# */
 		clkrun_val |= LPC_CLKRUN_EN;
 		iowrite32(clkrun_val, data->ilb_base_addr + LPC_CNTRL_OFFSET);
-
-		/*
-		 * Write any random value on port 0x80 which is on LPC, to make
-		 * sure LPC clock is running before sending any TPM command.
-		 */
-		outb(0xCC, 0x80);
 	}
+
+#ifdef CONFIG_HAS_IOPORT
+	/*
+	 * Write any random value on port 0x80 which is on LPC, to make
+	 * sure LPC clock is running before sending any TPM command.
+	 */
+	outb(0xCC, 0x80);
+#endif
 }
 
 static const struct tpm_class_ops tpm_tis = {