diff mbox series

[v4,08/18] PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2

Message ID 20230315064255.15591-9-manivannan.sadhasivam@linaro.org (mailing list archive)
State Superseded
Headers show
Series Qcom PCIe cleanups and improvements | expand

Commit Message

Manivannan Sadhasivam March 15, 2023, 6:42 a.m. UTC
All the clocks are enabled and disabled at the same time. So the bulk clock
APIs can be used to handle them together. This simplifies the code a lot.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 72 ++++++--------------------
 1 file changed, 15 insertions(+), 57 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 0bb27d3c95a0..939973733a1e 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -162,12 +162,10 @@  struct qcom_pcie_resources_2_1_0 {
 	struct regulator_bulk_data supplies[QCOM_PCIE_2_1_0_MAX_SUPPLY];
 };
 
-#define QCOM_PCIE_2_3_2_MAX_SUPPLY	2
+#define QCOM_PCIE_2_3_2_MAX_CLOCKS		4
+#define QCOM_PCIE_2_3_2_MAX_SUPPLY		2
 struct qcom_pcie_resources_2_3_2 {
-	struct clk *aux_clk;
-	struct clk *master_clk;
-	struct clk *slave_clk;
-	struct clk *cfg_clk;
+	struct clk_bulk_data clks[QCOM_PCIE_2_3_2_MAX_CLOCKS];
 	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
 };
 
@@ -539,21 +537,14 @@  static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
 	if (ret)
 		return ret;
 
-	res->aux_clk = devm_clk_get(dev, "aux");
-	if (IS_ERR(res->aux_clk))
-		return PTR_ERR(res->aux_clk);
-
-	res->cfg_clk = devm_clk_get(dev, "cfg");
-	if (IS_ERR(res->cfg_clk))
-		return PTR_ERR(res->cfg_clk);
-
-	res->master_clk = devm_clk_get(dev, "bus_master");
-	if (IS_ERR(res->master_clk))
-		return PTR_ERR(res->master_clk);
+	res->clks[0].id = "aux";
+	res->clks[1].id = "cfg";
+	res->clks[2].id = "bus_master";
+	res->clks[3].id = "bus_slave";
 
-	res->slave_clk = devm_clk_get(dev, "bus_slave");
-	if (IS_ERR(res->slave_clk))
-		return PTR_ERR(res->slave_clk);
+	ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks);
+	if (ret < 0)
+		return ret;
 
 	return 0;
 }
@@ -562,11 +553,7 @@  static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 
-	clk_disable_unprepare(res->slave_clk);
-	clk_disable_unprepare(res->master_clk);
-	clk_disable_unprepare(res->cfg_clk);
-	clk_disable_unprepare(res->aux_clk);
-
+	clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks);
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
@@ -583,43 +570,14 @@  static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 		return ret;
 	}
 
-	ret = clk_prepare_enable(res->aux_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable aux clock\n");
-		goto err_aux_clk;
-	}
-
-	ret = clk_prepare_enable(res->cfg_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable cfg clock\n");
-		goto err_cfg_clk;
-	}
-
-	ret = clk_prepare_enable(res->master_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable master clock\n");
-		goto err_master_clk;
-	}
-
-	ret = clk_prepare_enable(res->slave_clk);
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks);
 	if (ret) {
-		dev_err(dev, "cannot prepare/enable slave clock\n");
-		goto err_slave_clk;
+		dev_err(dev, "cannot prepare/enable clocks\n");
+		regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
+		return ret;
 	}
 
 	return 0;
-
-err_slave_clk:
-	clk_disable_unprepare(res->master_clk);
-err_master_clk:
-	clk_disable_unprepare(res->cfg_clk);
-err_cfg_clk:
-	clk_disable_unprepare(res->aux_clk);
-
-err_aux_clk:
-	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-
-	return ret;
 }
 
 static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)