diff mbox series

[v4,1/1] PCI: qcom: Add support for system suspend and resume

Message ID 20230403154922.20704-2-manivannan.sadhasivam@linaro.org (mailing list archive)
State Accepted
Headers show
Series PCI: qcom: Add support for system suspend and resume | expand

Commit Message

Manivannan Sadhasivam April 3, 2023, 3:49 p.m. UTC 
During the system suspend, vote for minimal interconnect bandwidth (1KiB)
to keep the interconnect path active for config access and also turn OFF
the resources like clock and PHY if there are no active devices connected
to the controller. For the controllers with active devices, the resources
are kept ON as removing the resources will trigger access violation during
the late end of suspend cycle as kernel tries to access the config space of
PCIe devices to mask the MSIs.

Also, it is not desirable to put the link into L2/L3 state as that
implies VDD supply will be removed and the devices may go into powerdown
state. This will affect the lifetime of storage devices like NVMe.

And finally, during resume, turn ON the resources if the controller was
truly suspended (resources OFF) and update the interconnect bandwidth
based on PCIe Gen speed.

Suggested-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Acked-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 62 ++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

Comments

Johan Hovold April 4, 2023, 9:06 a.m. UTC | #1 
On Mon, Apr 03, 2023 at 09:19:22PM +0530, Manivannan Sadhasivam wrote:
> During the system suspend, vote for minimal interconnect bandwidth (1KiB)
> to keep the interconnect path active for config access and also turn OFF
> the resources like clock and PHY if there are no active devices connected
> to the controller. For the controllers with active devices, the resources
> are kept ON as removing the resources will trigger access violation during
> the late end of suspend cycle as kernel tries to access the config space of
> PCIe devices to mask the MSIs.
> 
> Also, it is not desirable to put the link into L2/L3 state as that
> implies VDD supply will be removed and the devices may go into powerdown
> state. This will affect the lifetime of storage devices like NVMe.
> 
> And finally, during resume, turn ON the resources if the controller was
> truly suspended (resources OFF) and update the interconnect bandwidth
> based on PCIe Gen speed.
> 
> Suggested-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> Acked-by: Dhruva Gole <d-gole@ti.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> +	/*
> +	 * Set minimum bandwidth required to keep data path functional during
> +	 * suspend

Nit: For some reason you dropped the full stop ('.') here in v4 I
noticed when comparing the diff.

> +	 */

Looks good to me now otherwise:

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>

Johan
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index a232b04af048..98d25fcbf512 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -227,6 +227,7 @@  struct qcom_pcie {
 	struct gpio_desc *reset;
 	struct icc_path *icc_mem;
 	const struct qcom_pcie_cfg *cfg;
+	bool suspended;
 };
 
 #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
@@ -1820,6 +1821,62 @@  static int qcom_pcie_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static int qcom_pcie_suspend_noirq(struct device *dev)
+{
+	struct qcom_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
+
+	/*
+	 * Set minimum bandwidth required to keep data path functional during
+	 * suspend
+	 */
+	ret = icc_set_bw(pcie->icc_mem, 0, kBps_to_icc(1));
+	if (ret) {
+		dev_err(dev, "Failed to set interconnect bandwidth: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Turn OFF the resources only for controllers without active PCIe
+	 * devices. For controllers with active devices, the resources are kept
+	 * ON and the link is expected to be in L0/L1 (sub)states.
+	 *
+	 * Turning OFF the resources for controllers with active PCIe devices
+	 * will trigger access violation during the end of the suspend cycle,
+	 * as kernel tries to access the PCIe devices config space for masking
+	 * MSIs.
+	 *
+	 * Also, it is not desirable to put the link into L2/L3 state as that
+	 * implies VDD supply will be removed and the devices may go into
+	 * powerdown state. This will affect the lifetime of the storage devices
+	 * like NVMe.
+	 */
+	if (!dw_pcie_link_up(pcie->pci)) {
+		qcom_pcie_host_deinit(&pcie->pci->pp);
+		pcie->suspended = true;
+	}
+
+	return 0;
+}
+
+static int qcom_pcie_resume_noirq(struct device *dev)
+{
+	struct qcom_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
+
+	if (pcie->suspended) {
+		ret = qcom_pcie_host_init(&pcie->pci->pp);
+		if (ret)
+			return ret;
+
+		pcie->suspended = false;
+	}
+
+	qcom_pcie_icc_update(pcie);
+
+	return 0;
+}
+
 static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-apq8064", .data = &cfg_2_1_0 },
 	{ .compatible = "qcom,pcie-apq8084", .data = &cfg_1_0_0 },
@@ -1856,12 +1913,17 @@  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
 
+static const struct dev_pm_ops qcom_pcie_pm_ops = {
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(qcom_pcie_suspend_noirq, qcom_pcie_resume_noirq)
+};
+
 static struct platform_driver qcom_pcie_driver = {
 	.probe = qcom_pcie_probe,
 	.driver = {
 		.name = "qcom-pcie",
 		.suppress_bind_attrs = true,
 		.of_match_table = qcom_pcie_match,
+		.pm = &qcom_pcie_pm_ops,
 	},
 };
 builtin_platform_driver(qcom_pcie_driver);